Paul Robinson

发表

Compression After Multiple Impacts: Modelling and Experimental Validation on Composite Curved Stiffened Panels

Mazdak Ghajari, Domenico Furfari, Spyridon Psarras, 2016 .

Demonstration of pseudo-ductility in unidirectional discontinuous carbon fibre/epoxy prepreg composites

Michael R Wisnom, Soraia Pimenta, Gergely Czél, 2015 .

Fractographic observations on delamination growth and the subsequent migration through the laminate

Emile S. Greenhalgh, E. Greenhalgh, P. Robinson, 2009 .

Maximizing the fundamental frequency of laminated cylindrical panels using layerwise optimization

Yoshihiro Narita, P. Robinson, Y. Narita, 2006 .

Micro-mechanical modelling of shear-driven fibre compressive failure and of fibre kinking for failure envelope generation in CFRP laminates

Renaud Gutkin, P. T. Curtis, Silvestre T. Pinho, 2010 .

Reducing the domain in the mechanical analysis of periodic structures, with application to woven composites

Silvestre T. Pinho, S. Pinho, P. Robinson, 2011 .

Shear driven delamination propagation in two dimensions

G.A.O. Davies, G. Davies, P. Robinson, 1997 .

Measurement of the fracture toughness associated with the longitudinal fibre compressive failure mode of laminated composites

Lorenzo Iannucci, Silvestre T. Pinho, Alison J. McMillan, 2012 .

Mechanical analysis and toughening mechanisms of a multiphase recycled CFRP

Stephen Pickering, Soraia Pimenta, Silvestre T. Pinho, 2010 .

Mesh generation and geometrical modelling of 3D woven composites with variable tow cross-sections

Lorenzo Iannucci, Silvestre T. Pinho, Alison J. McMillan, 2012 .

High performance carbon fibre reinforced epoxy composites with controllable stiffness

Alexander Bismarck, A. Bismarck, H. Maples, 2014 .

Impactor mass and specimen geometry effects in low velocity impact of laminated composites

G.A.O. Davies, G. Davies, P. Robinson, 1992 .

A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage

Lorenzo Iannucci, P. T. Curtis, L. Iannucci, 2012 .

A detailed finite element investigation of composite bolted joints with countersunk fasteners

Silvestre T. Pinho, S. Pinho, P. Robinson, 2013 .

A finite element model for delamination propagation in composites

F. Javidrad, D. Hitchings, D. Hitchings, 1996 .

Microwave curing of carbon–epoxy composites: Penetration depth and material characterisation

Alexander Bismarck, A. Bismarck, P. Robinson, 2015 .

Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development

Lorenzo Iannucci, Silvestre T. Pinho, S. Pinho, 2006 .

Development and evaluation of a novel integrated anti-icing/de-icing technology for carbon fibre composite aerostructures using an electro-conductive textile

Brian Falzon, B. Falzon, P. Robinson, 2015 .

High performance composites with active stiffness control.

Alexander Bismarck, A. Bismarck, H. Maples, 2013, ACS applied materials & interfaces.

A micromechanical model for kink-band formation: Part I — experimental study and numerical modelling

Renaud Gutkin, Soraia Pimenta, Silvestre T. Pinho, 2009 .

Modelling of strain rate effects on matrix dominated elastic and failure properties of unidirectional fibre-reinforced polymer-matrix composites

Lorenzo Iannucci, P. T. Curtis, L. Iannucci, 2012 .

Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear

Pedro P. Camanho, Lorenzo Iannucci, Carlos G. Davila, 2006 .

Development of novel composites through fibre and interface/interphase modification

Hui Qian, Emile S. Greenhalgh, Jonny J. Blaker, 2016 .

Material and structural response of polymer-matrix fibre-reinforced composites: Part B

Silvestre T. Pinho, S. Pinho, P. Robinson, 2012 .

Failure Models and Criteria for Frp Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity

Pedro P. Camanho, Lorenzo Iannucci, Carlos G. Davila, 2013 .

A Modified DCB Specimen for Mode I Testing of Multidirectional Laminates

P. Robinson, D. Song, Paul Robinson, 1992 .

Formulation and implementation of decohesion elements in an explicit finite element code

Lorenzo Iannucci, Silvestre T. Pinho, S. Pinho, 2006 .

Fracture toughness of the tensile and compressive fibre failure modes in laminated composites

Lorenzo Iannucci, Silvestre T. Pinho, S. Pinho, 2006 .

Response and damage propagation of polymer-matrix fibre-reinforced composites: Predictions for WWFE-III Part A

Silvestre T. Pinho, S. Pinho, P. Robinson, 2013 .

Translaminar fracture toughness testing of composites: A review

Silvestre T. Pinho, Alison J. McMillan, S. Pinho, 2012 .

A coupled mixed-mode delamination model for laminated composites

Lorenzo Iannucci, Silvestre T. Pinho, L. Iannucci, 2011 .

On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses

Renaud Gutkin, P. T. Curtis, Silvestre T. Pinho, 2011 .

On the numerical simulation of fatigue driven delamination with interface elements

Ugo Galvanetto, José J. Muñoz, U. Galvanetto, 2006 .

On the transition from shear-driven fibre compressive failure to fibre kinking in notched CFRP laminates under longitudinal compression

Renaud Gutkin, P. T. Curtis, Silvestre T. Pinho, 2010 .