Dan J.L. Brett

发表

Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells

Bruno G. Pollet, Ahmad El-kharouf, Thomas J. Mason, 2012 .

System-level electro-thermal optimisation of air-cooled open-cathode polymer electrolyte fuel cells: Air blower parasitic load and schemes for dynamic operation

Paul Leonard Adcock, Oliver Curnick, Sean Ashton, 2015 .

A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis

Paul R. Shearing, Jason Millichamp, Thomas J. Mason, 2013 .

An improved cathode for alkaline fuel cells

Nigel P. Brandon, D. Brett, N. Brandon, 2010 .

An Experimentally Validated Steady State Polymer Electrolyte Membrane Water Electrolyser Model

Paul R. Shearing, Ishanka Dedigama, D. Brett, 2014, International Journal of Electrochemical Science.

Detection of Internal Defects in Lithium-Ion Batteries Using Lock-in Thermography

Paul R. Shearing, Gareth Hinds, Jawwad A. Darr, 2015 .

System modelling and integration of an intermediate temperature solid oxide fuel cell and ZEBRA battery for automotive applications

Nigel P. Brandon, P. Aguiar, D. Brett, 2006 .

Adjusted method to calculate an electric wheelchair power cycle: fuel cell implementation example

Giulia Barbareschi, Catherine Holloway, Dafne Zuleima Morgado Ramirez, 2019, Journal of Energy Storage.

Pilot-scale continuous synthesis of a vanadium-doped LiFePO4/C nanocomposite high-rate cathodes for lithium-ion batteries

Paul R. Shearing, Furio Corà, Christopher J. Tighe, 2016 .

Thermodynamic predictions of the impact of fuel composition on the propensity of sulphur to interact with Ni and ceria-based anodes for solid oxide fuel cells

Nigel P. Brandon, P. Lohsoontorn, D. Brett, 2008 .

Nitrogen Blanketing and Hydrogen Starvation in Dead-Ended-Anode Polymer Electrolyte Fuel Cells Revealed by Hydro-Electro-Thermal Analysis

Paul Leonard Adcock, Sean Ashton, Paul R. Shearing, 2016 .

Modelling and experiments to identify high-risk failure scenarios for testing the safety of lithium-ion cells

Eric Darcy, Paul R. Shearing, Rhodri Jervis, 2019, Journal of Power Sources.

Application of a GaPO4 Crystal Microbalance for the Detection of Coke Formation in High-Temperature Reactors and Solid Oxide Fuel Cells

Nigel P. Brandon, George Manos, Jason Millichamp, 2011 .

The application of phase contrast X-ray techniques for imaging Li-ion battery electrodes

Nigel P. Brandon, Philip J. Withers, Jeff Gelb, 2014 .

A study of carbon deposition on solid oxide fuel cell anodes using electrochemical impedance spectroscopy in combination with a high temperature crystal microbalance

Nigel P. Brandon, Robert C. Maher, George Manos, 2013 .

Development of open-cathode polymer electrolyte fuel cells using printed circuit board flow-field plates: Flow geometry characterisation

Paul R. Shearing, Christopher Gibbs, James B. Robinson, 2014 .

Investigation of Hot Pressed Polymer Electrolyte Fuel Cell Assemblies via X-ray Computed Tomography

Paul R. Shearing, Rhodri Jervis, Francesco Iacoviello, 2017 .

Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits.

Eric Darcy, Michael Drakopoulos, Paul R. Shearing, 2017 .

Measurement of the current distribution along a single flow channel of a solid polymer fuel cell

Nigel P. Brandon, Anthony Kucernak, N Vasileiadis, 2001 .

Measurement and modelling of carbon monoxide poisoning distribution within a polymer electrolyte fuel cell

Nigel P. Brandon, P. Aguiar, Anthony Kucernak, 2007 .

Development of a polymer electrolyte fuel cell dead-ended anode purge strategy for use with a nitrogen-containing hydrogen gas supply

Paul R. Shearing, Quentin Meyer, Tonny I. Okedi, 2017 .

Investigation of reactant transport within a polymer electrolyte fuel cell using localised CO stripping voltammetry and adsorption transients

Nigel P. Brandon, Anthony Kucernak, S Atkins, 2004 .

Lithiation‐Induced Dilation Mapping in a Lithium‐Ion Battery Electrode by 3D X‐Ray Microscopy and Digital Volume Correlation

Nigel P. Brandon, Philip J. Withers, Jeff Gelb, 2014 .

A techno-economic appraisal of hydrogen generation and the case for solid oxide electrolyser cells

M Manage, Stefaan Simons, D. Brett, 2011 .

Design of experiments to generate a fuel cell electro-thermal performance map and optimise transitional pathways

Paul Leonard Adcock, Paul R. Shearing, Quentin Meyer, 2018 .

Methanol as a direct fuel in intermediate temperature (500–600∘C) solid oxide fuel cells with copper based anodes

Nigel P. Brandon, Denis J Cumming, D. Brett, 2005 .