Hanlin Liao

发表

The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process

Chunnian Zeng, Zhenhua Cai, Ghislain Montavon, 2013, Journal of Thermal Spray Technology.

Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel

Yu Zhang, H. Liao, T. Ma, 2008 .

Study on structural evolution of nanostructured 3 mol% yttria stabilized zirconia coatings during low temperature ageing

Christian Coddet, H. Liao, C. Coddet, 2009 .

Microstructure and tensile properties of iron parts fabricated by selective laser melting

Bo Song, Christian Coddet, Sihao Deng, 2014 .

Correlations between operating conditions, microstructure and mechanical properties of twin wire arc sprayed steel coatings

Zhi-Qiang Feng, Christian Coddet, Zhi-Qiang Feng, 2003 .

Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying

Hee-Seon Bang, Christian Coddet, Chang-Jiu Li, 2007 .

Modelling of coating thickness distribution and its application in offline programming software

Yingchun Xie, Sihao Deng, Chaoyue Chen, 2017 .

Microstructure Evolution and Mechanical Properties of Linear Friction Welded 45 Steel Joint

H. Liao, T. Ma, Jinglong Li, 2007 .

Cold spray additive manufacturing and repair: Fundamentals and applications

Shuo Yin, Pasquale Cavaliere, Barry Aldwell, 2018 .

Microstructure and Magnetic Properties of Fe–Ni Alloy Fabricated by Selective Laser Melting Fe/Ni Mixed Powders

Christian Coddet, Baicheng Zhang, H. Liao, 2013 .

Investigation of the microstructure and tribological behavior of cold-sprayed tin-bronze-based composite coatings

Christian Coddet, Yang Gao, Wenya Li, 2009 .

Selective laser melting commercially pure Ti under vacuum

Christian Coddet, Baicheng Zhang, H. Liao, 2013 .

Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior

Bo Song, Qi Liu, Christian Coddet, 2014 .

Microstructure, microhardness and dry friction behavior of cold-sprayed tin bronze coatings

Christian Coddet, Yang Gao, L. Dembinski, 2007 .

Neural Computation to Estimate Heat Flux in an Atmospheric Plasma Spray Process

Sofiane Guessasma, Christian Coddet, Hanlin Liao, 2005 .

Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder

Christian Coddet, Bernard Normand, H. Liao, 2004 .

Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology

Lin Zhu, Christian Coddet, Baicheng Zhang, 2012 .

Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coatings

Christian Coddet, B. Normand, H. Liao, 2000 .

On dry sliding friction and wear behaviour of PEEK and PEEK/SiC-composite coatings

Christian Coddet, H. Liao, C. Coddet, 2006 .

Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture

Christian Coddet, Baicheng Zhang, H. Liao, 2012 .

Uniform design method for optimization of process parameters of plasma sprayed TiN coatings

Jacques Foct, Christian Coddet, Bernard Normand, 2003 .

Characterization of Yttria-Stabilized Zirconia Coatings Deposited by Low-Pressure Plasma Spraying

Shuo Yin, Frédéric Lapostolle, H. Liao, 2016, Journal of Thermal Spray Technology.

Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V

Bo Song, Christian Coddet, Baicheng Zhang, 2012 .

Effects of sliding velocity and applied load on the tribological mechanism of amorphous poly-ether–ether–ketone (PEEK)

Chao Zhang, Christian Coddet, Philippe Nardin, 2008 .

COMBINATION OF INVERSE AND NEURAL NETWORK METHODS TO ESTIMATE HEAT FLUX

Ghislain Montavon, Sofiane Guessasma, Christian Coddet, 2005 .

Sensing properties of atmospheric plasma-sprayed WO3 coating for sub-ppm NO2 detection

Chao Zhang, Marc Debliquy, Christian Coddet, 2010 .

Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments

Christian Coddet, H. Liao, C. Coddet, 2005 .

Numerical study on the effect of nozzle dimension on particle distribution in cold spraying

Taikai Liu, Marie-Pierre Planche, H. Liao, 2013 .

Magnetic properties of in-situ synthesized FeNi3 by selective laser melting Fe-80%Ni powders

Christian Coddet, Baicheng Zhang, H. Liao, 2013 .

Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray

Wang Xiaofang, Shuo Yin, Qi Liu, 2014 .

Deposition and microstructure characterization of atmospheric plasma-sprayed ZnO coatings for NO2 detection

Chao Zhang, Marc Debliquy, C. Zhang, 2010 .

Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition

Min Liu, Shuo Yin, Jian Lu, 2019, Materials Research Letters.

Finite Element Simulation of Impacting Behavior of Particles in Cold Spraying by Eulerian Approach

M. Yu, H. Liao, Hanlin Liao, 2011, Journal of Thermal Spray Technology.

On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field.

Christian Coddet, Zhongming Ren, Hao Yuan, 2017, Materials science & engineering. C, Materials for biological applications.

Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior

Bo Song, Christian Coddet, H. Liao, 2014 .

The Effect of Robot Kinematics on the Coating Thickness Uniformity

Christian Coddet, Sihao Deng, Hanlin Liao, 2010 .

Oxidation control in atmospheric plasma spraying coating

Christian Coddet, Marie-Pierre Planche, H. Liao, 2007 .

Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering

Bo Song, Christian Coddet, H. Liao, 2012 .

Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review

Shuo Yin, Rocco Lupoi, Morten Meyer, 2016, Journal of Thermal Spray Technology.

A Coupled Model Between Robot Trajectories and Thermal History of the Workpiece During Thermal Spray Operation

Zhenhua Cai, Ghislain Montavon, Sihao Deng, 2013, Journal of Thermal Spray Technology.