B. M. Jan

M. Khalil, B. M. Jan, Zulhelmi Amir, 2019, PROCEEDINGS OF THE 4TH INTERNATIONAL SYMPOSIUM ON CURRENT PROGRESS IN MATHEMATICS AND SCIENCES (ISCPMS2018).

Thermal degradation of aqueous 2-aminoethylethanolamine in CO2 capture; identification of degradation products, reaction mechanisms and computational studies

V. Lee, S. Mazari, W. Basirun, 2017, Chemistry Central Journal.

Prediction of Phase-Inversion Temperature of a Triglyceride Microemulsion Using Design of Experiments

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Thermal degradation kinetics of morpholine for carbon dioxide capture

A. W. Bhutto, Rashid Abro, S. Mazari, 2020 .

A review of gas chromatographic techniques for identification of aqueous amine degradation products in carbonated environments

S. Mazari, N. M. Mubarak, Y. Sani, 2021, Environmental Science and Pollution Research.

Science and Technology Roadmap for Adsorption of Metallic Contaminants from Aqueous Effluents Using Biopolymers and Its’ Derivatives

Y. A. Wahab, Z. Chowdhury, B. M. Jan, 2021, Advanced Industrial Wastewater Treatment and Reclamation of Water.

Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study

M. Khalil, B. S. Ali, B. M. Jan, 2015 .

Stability-indicating RP-HPLC method for simultaneous determination of metformin hydrochloride and vildagliptin in tablet and biological samples

A. Tahir, B. M. Jan, R. Ikram, 2020, Acta Chromatographica.

Effects of morphology and graphitization of carbon nanomaterials on the rheology, emulsion stability, and filtration control ability of drilling fluids

G. Abdulkareem-Alsultan, R. Yunus, D. Kania, 2022, Journal of Materials Research and Technology.

Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature

M. Khalil, A. Raman, B. M. Jan, 2011 .

Rheological Properties of Super Light Weight Completion Fluid for Perforation with Underbalanced

M. Khalil, A. Raman, B. M. Jan, 2009 .

Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Formation and Phase Behavior of Winsor Type III Jatropha curcas-Based Microemulsion Systems

C. W. Tong, M. Khalil, B. S. Ali, 2016 .

Correlations between interfacial tension and cumulative tertiary oil recovery in a triglyceride microemulsion flooding

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Formulation and phase behavior study of a nonionic triglyceride microemulsion to increase hydrocarbon production

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Formulation, optimization and application of triglyceride microemulsion in enhanced oil recovery

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Review of biodegradable synthetic-based drilling fluid: Progression, performance and future prospect

R. Yunus, S. Rashid, H. Lim, 2018, Renewable and Sustainable Energy Reviews.

Towards recent tendencies in drilling fluids: Application of carbon-based nanomaterials

B. M. Jan, R. Ikram, J. Vejpravová, 2021, Journal of Materials Research and Technology.

Prediction of Water Percolation Threshold of a Microemulsion Using Electrical Conductivity Measurements and Design of Experiments

B. S. Ali, Z. Jeirani, B. M. Jan, 2012 .

Rheological behavior and temperature dependency study of Saraline-based super lightweight completion fluid

M. Khalil, Zulkafli Hassan, B. M. Jan, 2015 .

Dependence of the photocatalytic reduction of bicarbonate to formic acid by Au–TiO2 on Au morphology and its plasmonic vibrational mode

M. Khalil, C. Lai, D. Djuhana, 2020 .

Density and viscosity prediction of super lightweight completion fluid SLWCF at reservoir conditions

C. W. Tong, M. Khalil, B. S. Ali, 2016 .

Prediction of Saraline-based super lightweight completion fluid densities at elevated pressures and temperatures

M. Khalil, W. Chong, Zulkafli Hassan, 2015 .

A Tait-like Equation for Estimating the Density of Nontraditional Super Lightweight Completion Fluid at High Pressure and Temperature

M. Khalil, A. Raman, B. M. Jan, 2013 .

Degradation study of piperazine, its blends and structural analogs for CO2 capture: A review

Badrul Mohamed Jan, Brahim Si Ali, Shaukat Ali Mazari, 2014 .

Viscosity prediction model optimization for Saraline-based super lightweight completion fluid at high pressure and temperature

M. Khalil, W. Chong, B. S. Ali, 2016 .

Herschel‐Bulkley rheological parameters of a novel environmentally friendly lightweight biopolymer drilling fluid from xanthan gum and starch

M. Khalil, B. M. Jan, 2012 .

Advances in synthesis of graphene derivatives using industrial wastes precursors; prospects and challenges

W. Ahmad, B. M. Jan, R. Ikram, 2020, Journal of Materials Research and Technology.

Rheological investigation of synthetic-based drilling fluid containing non-ionic surfactant pentaerythritol ester using full factorial design

R. Omar, R. Yunus, D. Kania, 2021 .

Advanced nanomaterials in oil and gas industry: Design, application and challenges

Mohammed Ali Berawi, Munawar Khalil, Chong Wen Tong, 2017 .

Pre-prepared Microemulsion Flooding in Enhanced Oil Recovery: A Review

B. S. Ali, Z. Jeirani, B. M. Jan, 2014 .

CO2-EOR/Sequestration: Current Trends and Future Horizons

H. Hamidi, A. Azdarpour, E. Mohammadian, 2019 .

The optimal mixture design of experiments: Alternative method in optimizing the aqueous phase composition of a microemulsion

B. S. Ali, Z. Jeirani, B. M. Jan, 2012 .

The Effect of Polymer on Triglyceride Microemulsion Formulation for Tertiary Oil Recovery

B. S. Ali, Z. Jeirani, B. M. Jan, 2013 .

Lubricity performance of non-ionic surfactants in high-solid drilling fluids: A perspective from quantum chemical calculations and filtration properties

R. Omar, R. Yunus, A. Aulia, 2021 .

Purification of lake water using a PES hollow fiber membrane

M. Hussain, M. Junaidi, N. Hashim, 2020, Water Supply.

Rheological Investigation of Welding Waste-Derived Graphene Oxide in Water-Based Drilling Fluids

G. Kenanakis, B. M. Jan, Akhmal Sidek, 2022, Materials.

Colloidal Stability of CA, SDS and PVA Coated Iron Oxide Nanoparticles (IONPs): Effect of Molar Ratio and Salinity

M. Khalil, B. M. Jan, Zulhelmi Amir, 2022, Polymers.

Composition Prediction of a Debutanizer Column using Equation Based Artificial Neural Network Model

Nasser Mohamed Ramli, Mohamed Azlan Hussain, Badrul Mohamed Jan, 2014, Neurocomputing.

Adsorption of non-ionic surfactants on organoclays in drilling fluid investigated by molecular descriptors and Monte Carlo random walk simulations

R. Omar, R. Yunus, A. Aulia, 2021 .

Viscoplastic Modeling of a Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling

Munawar Khalil, Badrul Mohamed Jan, M. Khalil, 2012 .

Multivariable control of a debutanizer column using equation based artificial neural network model inverse control strategies

Nasser Mohamed Ramli, Mohamed Azlan Hussain, Badrul Mohamed Jan, 2016, Neurocomputing.

ONLINE COMPOSITION PREDICTION OF A DEBUTANIZER COLUMN USING ARTIFICIAL NEURAL NETWORK

M. Hussain, Bawadi Abdullah, N. Ramli, 2017 .

Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling

M. Khalil, B. S. Ali, B. M. Jan, 2016 .

Increasing Production by Maximizing Underbalance During Perforation Using Nontraditional Lightweight Completion Fluid

Badrul Mohamed Jan, Annur Suhadi, Graeme R. Rae, 2009 .

Surface modification of superparamagnetic nanoparticles for enhanced oil recovery: A review

B. M. Jan, Zulhelmi Amir, Siti Nurliyana Che Mohamed Hussein, 2024, Journal of Molecular Liquids.