Hyun-Duck Kwak

发表

Critical Speeds Evaluation of Turbo Pump Unit with a Elasticring Inserted Ball Bearing

Yong-Bok Lee, Chang Ho Kim, Tae-Woong Ha, 2001 .

Critical Speed Analysis of the Liquid Rocket Turbopump

Jin-Han Kim, Seong-Min Jeon, Hyun-Duck Kwak, 2005 .

Conceptual design of electric-pump motor for 50kW rocket engine

Jeong Kim, Chang-Ho Choi, Hyun-Duck Kwak, 2018 .

Mechanical Face Seal Performance Test for 75ton Class Turbopump

Seong-Min Jeon, Jin-Han Kim, Hyun-Duck Kwak, 2009 .

Comparative Study on the Performance of Small Satellites Launch Vehicle Employing ElecPump Cycle Upper Stage Engine

Hyun-Duck Kwak, Byungil Yu, Kim， Hong-jip, 2020 .

Preliminary Test Results for Rotordynamic Coefficients and Leakage Performance of Floating Ring Seals in the High Pressure Turbopump

Yong-Bok Lee, Hyun-Duck Kwak, G. H. Jang, 2003 .

Rotordynamic Analysis of a High Thrust Liquid Rocket Engine Turbopump

Jin-Han Kim, Seong-Min Jeon, Hyun-Duck Kwak, 2008 .

Performance Test of a 75-tonf Rocket Engine Turbopump

Seung-Han Kim, Dae-Jin Kim, Jin-Han Kim, 2016 .

A Fuzzy Expert System for Fault Diagnosis of Rotating Machinery

Seung-Jong Kim, Yong-Bok Lee, Hyun-Duck Kwak, 2003 .

Corrigendum to “Numerical prediction of slip flow effect on gas-lubricated journal bearings for MEMS/MST-based micro-rotating machinery” [Tribology International 38 (2005) 89–96]☆

Yong-Bok Lee, Chang Ho Kim, Hyun-Duck Kwak, 2006 .

Analysis of Gas-Lubricated Bearings with a Coupled Boundary Effect for Micro Gas Turbine

Yong-Bok Lee, Hyun-Duck Kwak, G. H. Jang, 2001 .

Numerical prediction of slip flow effect on gas-lubricated journal bearings for MEMS/MST-based micro-rotating machinery

Hyun-Duck Kwak, C. Kim, Yong-Bok Lee, 2005 .

Performance assessment of electrically driven pump-fed LOX/kerosene cycle rocket engine: Comparison with gas generator cycle

Chang-Ho Choi, Hyun-Duck Kwak, Sejin Kwon, 2018, Aerospace Science and Technology.