E. Schmidt

发表

3-D finite element analysis of the cogging torque of a transverse flux machine

E. Schmidt, E. Schmidt, 2005, IEEE Transactions on Magnetics.

Eddy Current Losses in the Stator Clamping System of Hydro Generators

E. Schmidt, 2004 .

Design of a Three Phase Permanent Magnet Biased Radial Active Magnetic Bearing Regarding a Position Sensorless Control

Matthias Hofer, Erich Schmidt, Manfred Schrodl, 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

Comparison of Synchronous Reluctance Machines with High-Anisotropy Rotors

E. Schmidt, 2012 .

Comparison of Different Designs of Synchronous Reluctance Machines with High-Anisotropy Rotors

E. Schmidt, 2012 .

High Order Hierarchic Finite Elements and Their Application on Eddy Current Losses in Permanent Magnets of Synchronous Machines

M. Kaltenbacher, E. Schmidt, Anton Wolfschluckner, 2015 .

Fast and Accurate Modeling of Squirrel Cage Induction Machines for the Transient Electro-mechanical Simulation of Electrified Drivetrains

F. Diwoky, E. Schmidt, D. Biro, 2020, 2020 International Conference on Electrical Machines (ICEM).

Application of a weak coupling algorithm in the electromagnetic-mechanical finite-element analysis for Roebel bars of large synchronous machines

C. Grabner, E. Schmidt, E. Schmidt, 2005, IEEE Transactions on Magnetics.

Finite element analysis of an external rotor permanent magnet synchronous machine with star- and delta-connected tooth coil windings

M. Susic, E. Schmidt, A. Eilenberger, 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

Implementation of mechanical flaking effects inside a layer structure during a coupled finite element analysis

E. Schmidt, C. Grabner, 2004, IEEE Transactions on Magnetics.

Finite element analysis of electrical machines and transformers

Erich Schmidt, E. Schmidt, 2011 .

Eddy current losses in permanent magnets of surface mounted permanent magnet synchronous machines—Analytical calculation and high order finite element analyses

Manfred Kaltenbacher, Erich Schmidt, Anton Wolfschluckner, 2017, Elektrotech. Informationstechnik.

Prototype design and experimental verification of an electromagnetic actuator for parametric stiffness excitation

Horst Ecker, Erich Schmidt, H. Ecker, 2010, CCECE 2010.

Sensitivity Analysis for Winding Support and Insulation of Power Transformers

E. Schmidt, P. Hamberger, P. Hamberger, 2007, 2007 Canadian Conference on Electrical and Computer Engineering.

Parameters of a Plunger Core Reactor with Parallel Winding Paths Obtained from Voltage Driven Finite Element Analyses

Erich Schmidt, Peter Hamberger, P. Hamberger, 2006, 2006 Canadian Conference on Electrical and Computer Engineering.

Influence of higher harmonics in the end region magnetic field on eddy currents in the stator clamping system of hydro generators

G. Traxler-Samek, A. Schwery, E. Schmidt, 2005, IEEE International Conference on Electric Machines and Drives, 2005..

Design studies on low voltage contactors by using transient finite element analyses with circuit coupling

E. Schmidt, A. Degwerth, E. Schmidt, 2005, Canadian Conference on Electrical and Computer Engineering, 2005..

Comparison of a solid and a laminated rotor for sensorless control of radial active magnetic bearings

Matthias Hofer, Erich Schmidt, Manfred Schrodl, 2009, 2009 IEEE International Electric Machines and Drives Conference.

Finite element analysis of a permanent magnet synchronous machine with an external rotor for a position sensorless control

E. Schmidt, A. Eilenberger, M. Susic, 2009, 2009 Australasian Universities Power Engineering Conference.

3D nonlinear transient finite element analysis of eddy currents in the stator clamping system of large hydro generators

Alexander Schwery, Georg Traxler-Samek, Erich Schmidt, 2006 .

Calculation of electromagnetic quantities of permanent magnet synchronous machines with tooth coil windings using finite elements and frozen permeabilities

Erich Schmidt, E. Schmidt, 2015, Elektrotech. Informationstechnik.

Calculation of electromagnetic quantities of permanent magnet synchronous machines with tooth coil windings using finite elements and frozen permeabilities

E. Schmidt, 2015, e & i Elektrotechnik und Informationstechnik.

Analytic calculation of the voltage shape of salient pole synchronous generators including damper winding and saturation effects

Alexander Schwery, Georg Traxler-Samek, Erich Schmidt, 2003 .

Analytical and numerical computation of combined mechanical Roebel bar properties

C. Grabner, E. Schmidt, E. Schmidt, 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

Analytical approximation of the displacement process of Roebel bars

E. Schmidt, C. Grabner, E. Schmidt, 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).