Paul A. Colegrove

发表

Additive manufacturing applications in Defence Support Services: current practices and framework for implementation

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2017, International Journal of System Assurance Engineering and Management.

Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts

Vimal Dhokia, Paul A. Colegrove, Stephen T. Newman, 2018, Int. J. Comput. Integr. Manuf..

Hybrid modelling of the contact gap conductance heat transfer in welding process

Hua Wang, Paul A. Colegrove, Jörn Mehnen, 2014, Adv. Eng. Softw..

A review of Additive Manufacturing technology and Cost Estimation techniques for the defence sector

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2017 .

Integrated Modelling of the Friction Stir Welding Process

Paul A. Colegrove, N. Kamp, Stewart Williams, 2006 .

A System Approach for Modelling Additive Manufacturing in Defence Acquisition Programs

John Ahmet Erkoyuncu, Nikolaos Tapoglou, Alessandro Busachi, 2018 .

3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2005 .

Development of Trivex friction stir welding tool Part 2 – three-dimensional flow modelling

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2004 .

Additive manufacturing and obsolescence management in the defence context

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2015 .

Designing a WAAM based manufacturing system for defence applications

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2015 .

Two-dimensional CFD modelling of flow round profiled FSW tooling

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2004 .

Defence Support Services for the Royal Navy: The Context of Spares Contracts

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2017 .

Defining next-generation additive manufacturing applications for the Ministry of Defence (MoD)

John Ahmet Erkoyuncu, Alessandro Busachi, Paul A. Colegrove, 2016 .

2D linear friction weld modelling of a Ti-6Al-4V T-joint

Paul A. Colegrove, Clement Buhr, Lucie Alexandra Lee, 2015 .

Modelling of flash formation and defect removal in Ti-6Al-4 V linear friction welds

Paul A. Colegrove, Michael J. Russell, Anthony R. McAndrew, 2013 .

Comparison of joining efficiency and residual stresses in laser and laser hybrid welding

Paul A. Colegrove, Stewart Williams, Anna Paradowska, 2011 .

Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement

Paul A. Colegrove, Romain Fayolle, Jan Hönnige, 2018 .

Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction

Paul A. Colegrove, Harry Edward Coules, Thilo Pirling, 2013 .

Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V

Paul A. Colegrove, Jörn Mehnen, Stewart Williams, 2012 .

Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components

Matthew Roy, Paul A. Colegrove, Philip J. Withers, 2016 .

Experimental measurement of biaxial thermal stress fields caused by arc welding

Paul A. Colegrove, Harry Edward Coules, Shuwen Wen, 2012 .

Experimental and numerical analysis of aluminium alloy 7075-T7351 friction stir welds

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2003 .

A computationally efficient finite element model of wire and arc additive manufacture

Paul A. Colegrove, Jörn Mehnen, Stewart Williams, 2013, The International Journal of Advanced Manufacturing Technology.

The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V

Paul A. Colegrove, Stewart Williams, Alphons A. Antonysamy, 2016 .

Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components

Paul A. Colegrove, Jan Hönnige, Filomeno Martina, 2017 .

CFD modelling of friction stir welding of thick plate 7449 aluminium alloy

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2006 .

Improved microstructure and increased mechanical properties of additive manufacture produced TI-6AL-4V by interpass cold rolling

Paul A. Colegrove, Stewart Williams, Filomeno Martina, 2013 .

Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling

Paul A. Colegrove, Stewart Williams, Jan Hönnige, 2018, Additive Manufacturing.

Development of the Trivex friction stir welding tool for making lap welds

Paul A. Colegrove, Hugh Shercliff, T Hyoe, 2004 .

Analytical process model for wire + arc additive manufacturing

Paul A. Colegrove, Stewart W. Williams, Filomeno Martina, 2018 .

Model for predicting heat generation and temperature in friction stir welding from the material properties

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2007 .

Measuring the process efficiency of controlled gas metal arc welding processes

Paul A. Colegrove, Stephan Egerland, Nuno Pepe, 2011 .

Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts

Paul A. Colegrove, Jörn Mehnen, Stewart Williams, 2011 .

Modelling of friction stir welding

Paul A. Colegrove, P. Colegrove, 2004 .

Welding process impact on residual stress and distortion

Paul A. Colegrove, Thilo Pirling, Axel Steuwer, 2009 .

Development of a laminar flow local shielding device for wire + arc additive manufacture

Paul A. Colegrove, Stewart Williams, Jialuo Ding, 2015 .

Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

Paul A. Colegrove, Michael E. Fitzpatrick, Bilal Ahmad, 2018, Materials & Design.

Modelling the influence of the process inputs on the removal of surface contaminants from Ti-6Al-4V linear friction welds

Paul A. Colegrove, Anthony R. McAndrew, Bertrand C. D. Flipo, 2015 .

Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling

Paul A. Colegrove, Harry Edward Coules, P. Colegrove, 2013 .

Development of Trivex friction stir welding tool Part 1 – two-dimensional flow modelling and experimental validation

Paul A. Colegrove, Hugh Shercliff, P. Colegrove, 2004 .

High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components

Matthew Roy, Paul A. Colegrove, Philip J. Withers, 2014 .

Improvement of microstructure and mechanical properties in Wire + Arc Additively Manufactured Ti-6Al-4V with Machine Hammer Peening

Paul A. Colegrove, Stewart Williams, Jan Hönnige, 2017 .