S. H. M. Anijdan

发表

Using GA–ANN algorithm to optimize soft magnetic properties of nanocrystalline mechanically alloyed Fe–Si powders

A. Bahrami, A. Bahrami, S. H. Mousavi Anijdan, 2009 .

A new method in prediction of TCP phases formation in superalloys

A. Bahrami, A. Bahrami, S. H. Mousavi Anijdan, 2005 .

The effect of accumulative roll bonding on the precipitation behavior of a single step artificially aged Al–Ag-Sc alloy

H. Jafarian, S. H. M. Anijdan, A. R. Eivani, 2021, Materials Science and Engineering: A.

The effect of increasing Cu and Ni on a significant enhancement of mechanical properties of high strength low alloy, low carbon steels of HSLA-100 type

S. H. M. Anijdan, S. M. Abbasi, A. R. H. Far, 2019, Materials Science and Engineering: A.

Optimization of spot welding process parameters in dissimilar joint of dual phase steel DP600 and AISI 304 stainless steel to achieve the highest level of shear-tensile strength

S. H. M. Anijdan, M. Ghobeitihasab, M. Sabzi, 2018 .

MEGAVOLTAGE DOSE ENHANCEMENT OF GOLD NANOPARTICLES FOR DIFFERENT GEOMETRIC SET-UPS: MEASUREMENTS AND MONTE CARLO SIMULATION

S. Khoei, S. Mahdavi, B. Mofid, 2012 .

Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode

H. Jafarian, N. Park, S. H. M. Anijdan, 2021 .

The effect of thermal frequency and current amplitude on weldability, microstructural evolution and mechanical properties of AA7075 alloy joint in DP-GMAW process

A. Farnia, S. H. M. Anijdan, B. Soltani, 2021, The International Journal of Advanced Manufacturing Technology.

The effect of heat treatment on corrosion behaviour of Ni–P–3 gr/lit Cu nano-composite coating

M. Farzam, S. H. M. Anijdan, M. Sabzi, 2018 .

Using genetic algorithm and artificial neural network analyses to design an Al–Si casting alloy of minimum porosity

H. M. Hosseini, A. Bahrami, A. Shafyei, 2006 .

The Effect of Electroless Bath Parameters and Heat Treatment on the Properties of Ni-P and Ni-P-Cu Composite Coatings

M. Farzam, S. H. M. Anijdan, M. Sabzi, 2018 .

Room-temperature mechanical properties of dual-phase steels deformed at high temperatures

S. H. M. Anijdan, H. Vahdani, 2005 .

Prediction of mechanical properties of DP steels using neural network model

A. Bahrami, A. Ekrami, A. Bahrami, 2005 .

Sensitivity to hydrogen induced cracking, and corrosion performance of an API X65 pipeline steel in H2S containing environment: influence of heat treatment and its subsequent microstructural changes

H. Jafarian, S. H. M. Anijdan, G. Arab, 2021 .

Sour corrosion performance and sensitivity to hydrogen induced cracking in the X70 pipeline steel: Effect of microstructural variation and pearlite percentage

S. H. M. Anijdan, M. Sabzi, N. Park, 2022, International Journal of Pressure Vessels and Piping.

Role of cube texture on toughness variation of electric resistance welded steel

H. Jafarian, M. Aghaie-Khafri, S. H. M. Anijdan, 2018 .

Optimization of flow stress in cool deformed Nb-microalloyed steel by combining strain induced transformation of retained austenite, cooling rate and heat treatment

D. Sediako, S. Yue, S. H. M. Anijdan, 2012 .

The effect of chemical composition and austenite conditioning on the transformation behavior of microalloyed steels

S. Yue, S. H. M. Anijdan, A. Rezaeian, 2012 .

A comprehensive study of microstructure development and its corresponding tensile properties in nano/ultrafine-grained metastable austenitic steel during accumulative roll bonding (ARB)

H. Jafarian, N. Park, S. H. M. Anijdan, 2017 .

Effects of tungsten on erosion–corrosion behavior of high chromium white cast iron

P. Davami, A. Bahrami, S. H. M. Anijdan, 2007 .

The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition

S. H. M. Anijdan, M. Sabzi, M. Asadian, 2018 .

The influence of pH, rotating speed and Cu content reinforcement nano-particles on wear/corrosion response of Ni-P-Cu nano-composite coatings

M. Farzam, S. H. M. Anijdan, M. Sabzi, 2018, Tribology International.

The influence of Aluminum on microstructure, mechanical properties and wear performance of Fe-14%Mn-1.05%C Manganese steel

H. Jafarian, S. H. M. Anijdan, H. Najafi, 2021, Journal of Materials Research and Technology.

The effect of temperature, CO2, H2S gases and the resultant iron carbonate and iron sulfide compounds on the sour corrosion behaviour of ASTM A-106 steel for pipeline transportation

S. H. M. Anijdan, M. Sabzi, M. Asadian, 2019, International Journal of Pressure Vessels and Piping.

Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior

H. Jafarian, S. H. M. Anijdan, T. Bhattacharjee, 2017 .

The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing

S. H. M. Anijdan, M. Sabzi, 2018 .

Microstructural evolution and fatigue properties of severely deformed AA1050 aluminum alloy

H. Jafarian, N. Park, M. Hosseini, 2017 .

The necessity of dynamic precipitation for the occurrence of no-recrystallization temperature in Nb-microalloyed steel

S. Yue, S. H. M. Anijdan, 2011 .

Effects of conventional heat treatment on wear resistance of AISI H13 tool steel

M. Shamanian, M. Golozar, A. Bahrami, 2005 .

The effect of pulse current changes in PCGTAW on microstructural evolution, drastic improvement in mechanical properties, and fracture mode of dissimilar welded joint of AISI 316L-AISI 310S stainless steels

H. Jafarian, N. Park, S. H. M. Anijdan, 2021, Materials Science and Engineering: A.

Effect of ferrite deformation temperature on the mechanical properties of microalloyed steels

S. Yue, S. H. M. Anijdan, 2012 .

Experimental investigation on the effect of gas tungsten arc welding current modes upon the microstructure, mechanical, and fractography properties of welded joints of two grades of AISI 316L and AISI310S alloy metal sheets

S. H. M. Anijdan, M. Sabzi, N. Park, 2022, Materials Science and Engineering: A.

Prediction of porosity percent in Al–Si casting alloys using ANN

A. Bahrami, A. Shafyei, A. Bahrami, 2006 .

EFFECTIVE PARAMETERS MODELING IN COMPRESSION OF AN AUSTENITIC STAINLESS STEEL USING ARTIFICIAL NEURAL NETWORK

H. M. Hosseini, A. Bahrami, A. Shafyei, 2005 .

Flow stress optimization for 304 stainless steel under cold and warm compression by artificial neural network and genetic algorithm

A. Bahrami, A. Bahrami, S. H. Mousavi Anijdan, 2007 .

A precipitation-hardening model for non-isothermal ageing of Al–Mg–Si alloys

A. Bahrami, M. Yazdanmehr, S. H. M. Anijdan, 2009 .

Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN

A. Bahrami, M. Yazdanmehr, S. H. M. Anijdan, 2009 .

Precipitation behavior of strip cast Al–Mg–0.4Sc–0.15Zr alloy under single and multiple-stage aging processes

M. Gallerneault, S. H. M. Anijdan, N. Singh, 2015 .

Texture development in cool deformed microalloyed steels

S. Yue, Majid Hoseini, S. H. M. Anijdan, 2011 .

Evaluation of texture weakening and microstructural evolution in an Fe–10Ni–7Mn martensitic steel severely deformed by six turns of high-pressure torsion

M. Nili-Ahmadabadi, T. Langdon, S. H. M. Anijdan, 2022, Materials Science and Engineering: A.

Failure analysis and damage causes of a steam turbine blade of 410 martensitic stainless steel after 165,000 h of working

A. Rivaz, M. Moazami-Goudarzi, S. H. M. Anijdan, 2020 .

The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel

H. Jafarian, S. H. M. Anijdan, M. Sabzi, 2020, Journal of Materials Research and Technology.

The effect of joint shape geometry on the microstructural evolution, fracture toughness, and corrosion behavior of the welded joints of a Hadfield Steel

S. H. M. Anijdan, M. Sabzi, S. H. Mousavi Anijdan, 2019 .