N. Tamari

发表

Crystal growth of titanium nitride by chemical vapor deposition

A. Kato, N. Tamari, 1975 .

Si3N4 -SiC Whisker Composite Material

N. Tamari, K. Ueno, R. Hayami, 1986 .

Influence of humidity and doping elements on the friction and wear of SiC in unlubricated sliding

Kôji Katô, S. Tsurekawa, Tadao Watanabe, 2004 .

Rapid Preparation of Lead Titanate Sputtering Target Using Spark‐Plasma Sintering

M. Tabuchi, H. Kageyama, T. Takeuchi, 2001 .

Effect of Spark Plasma Sintering on Densification and Mechanical Properties of Silicon Carbide

Koji Tanaka, Takahiro Tanaka, I. Kondoh, 1995 .

Junction migration in PbTe‐PbSnTe heterostructures

M. Oron, N. Tamari, S. Rotter, 1981 .

Improvement of Mechanical Strength of 8 mol % Yttria-Stabilized Zirconia Ceramics by Spark-Plasma Sintering

Y. Takeda, H. Kageyama, T. Takeuchi, 2002 .

Determination of the chemical width of grain boundaries of boron- and carbon-doped hot-pressed β-SiC by HAADF imaging and ELNES line-profile

M. Kawasaki, K. Kaneko, S. Tsurekawa, 2000 .

Electrical Discharge Machining of Si3N4-SiC Whisker Composite Ceramics

N. Tamari, K. Ueno, Y. Toibana, 1986 .

Growth study of large non-seeded Pb1−x Snx Te single crystals

H. Shtrikman, N. Tamari, 1979 .

Growth rate of titanium carbide whiskers in chemical vapor deposition

A. Kato, N. Tamari, Muneyasu Yasunaga, 1977 .

Electrical properties of indium-doped LPE layers of Pb1−xSnx Te

H. Shtrikman, N. Tamari, D. Eger, 1981 .

Non-seeded growth of large single Pb1−xSnxTe crystals on a quartz surface

H. Shtrikman, N. Tamari, 1978 .

Some common aspects of the growth of TiN, ZrN, TiC and ZrC whiskers in chemical vapor deposition

A. Kato, N. Tamari, 1980 .

Usefulness of Spark Plasma Sintering on Densification and Mechanical Properties of Alumina Whisker/Zirconia Composites

Takahiro Tanaka, I. Kondoh, N. Tamari, 1994 .

Fabrication of three-dimensional tyranno fibre reinforced sic composite by the polymer precursor method

Takahiro Tanaka, M. Iwasa, N. Tamari, 1998 .

Improvement of Oxidation Resistance and Oxidation-Induced Embrittlement by Controlling Grain Boundary Microstructure in Silicon Carbides with Different Dopants

S. Tsurekawa, Tadao Watanabe, N. Tamari, 2004 .

Mechanical Properties and Cutting Performance of Titanium Carbide Whisker/Alumina Composites

Takahiro Tanaka, I. Kondoh, N. Tamari, 1996 .

Mechanical Properties and Existing Phases of Composite Ceramics Obtained by Sintering of a Mixture of Hydroxyapatite and Zirconia

N. Tamari, I. Kondo, M. Mouri, 1987 .

Effect of Spark Plasma Sintering on Densification, Mechanichal Properties and Micro-structure of Alumina Ceramics

Y. Makino, Takahiro Tanaka, I. Kondoh, 1999 .

Consolidation Behavior and Mechanical Properties of SiC with Al2O3 and Yb2O3 Consolidated by SPS

Y. Makino, T. Takeuchi, N. Tamari, 2009 .

Synthesis of Dense Lead Titanate Ceramics with Submicrometer Grains by Spark Plasma Sintering

M. Tabuchi, H. Kageyama, T. Takeuchi, 2004 .

Sintering of Tricalcium Phosphate by HIP

I. Kondoh, N. Tamari, M. Kinoshita, 1989 .

Sintering of Zircon-Silicon Carbide Whisker Composites and Their Mechanical Properties

Takahiro Tanaka, I. Kondoh, N. Tamari, 1993 .

Fabrication and evaluation of 3-dimensional Tyranno fiber reinforced SiC composites by repeated infiltration of polycarbosilane

Takahiro Tanaka, M. Iwasa, I. Kondoh, 1995 .

Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes

Y. Miyamoto, Y. Morisada, N. Tamari, 2007 .

Fabrication and Mechanical Properties of 3-Dimensional Tyranno Fiber Reinforced SiC Composites by Repeated Infiltration of Polycarbosilane

Takahiro Tanaka, M. Iwasa, I. Kondoh, 1996 .

Catalytic effects of various metals and refractory oxides on the growth of TiC whiskers by chemical vapor deposition

A. Kato, N. Tamari, 1979 .

Effect of Calcium Fluoride Addition on Densification and Mechanical Properties of Hydroxyapatite-Zirconia Composite Ceramics

N. Tamari, M. Kinoshita, I. Kondo, 1988 .

Effect of Spark Plasma Sintering on Densification, Mechanical Properties and Cutting Performance of Titanium Carbide Whisker/Alumina Composite Ceramics

Takahiro Tanaka, I. Kondoh, N. Tamari, 1997 .

Mechanical Properties of Alumina-Mullite Whisker Composites

Takahiro Tanaka, I. Kondoh, N. Tamari, 1993 .

Mechanical Properties of B4C-SiC Whisker Composite Ceramics

Takahiro Tanaka, I. Kondoh, Hiroyuki Kobayashi, 1990 .

Catalytic effect of nickel on the growth of zirconium carbide whiskers by chemical vapor deposition

A. Kato, N. Tamari, 1978 .

Mechanical properties of zirconia-alumina whisker composite ceramics

Takahiro Tanaka, I. Kondoh, Kohji Gotoh, 1992 .

Grain Boundary Engineering for the Control of Mechanical Properties and Oxidation-Induced Embrittlement in Silicon Carbides

S. Tsurekawa, Tadao Watanabe, N. Tamari, 2004 .

Modification of surface hardness of alumina by ion implantation

M. Iwasa, A. Chayahara, M. Ikeyama, 1994 .

Growth and characterization of Cd-Doped InGaAsP/InP double heterostructure lasers

N. Tamari, 1982 .

Liquid phase epitaxial growth of cadmium‐doped InGaAsP/InP double heterostructure lasers

N. Tamari, 1981 .

Low threshold current density InGaAsP/InP lasers grown in a vertical liquid phase epitaxial system

A. Ballman, N. Tamari, 1981 .

Lasing properties of InGaAsP buried heterojunction lasers grown on a mesa substrate

C. Burrus, H. Shtrikman, M. Oron, 1982 .

Characteristics of tin and cadmium doping in liquid‐phase epitaxial grown InGaAsP

H. Shtrikman, A. Ballman, N. Tamari, 1985 .

Control of electron concentration in liquid-phase epitaxial layers of Pb1−xSnxTe by indium doping

H. Shtrikman, N. Tamari, D. Eger, 1980 .

Dislocation etch pits in LPE‐grown Pb1−xSnxTe (LTT) heterostructures

H. Shtrikman, N. Tamari, 1979 .

Carrier concentration and mobility of PbTe and Pb1−xSnxTe LPE thin layers

N. Tamari, D. Eger, A. Zemel, 1979 .

Improved nucleation and a planar interface in LPE grown Pb1−xSnxTe heterostructures

H. Shtrikman, N. Tamari, 1979 .

LPE growth of Pb1-xSnxTe layers on metal-etched substrates

H. Shtrikman, N. Tamari, 1980 .

Experimentally determined solid-liquid the lines of Pb1−xSnxTe

H. Shtrikman, N. Tamari, 1978 .

Tin doping of active region in InGaAsP/InP lasers

N. Tamari, 1982 .

Effect of doping elements on the friction and wear properties of SiC in unlubricated sliding condition

S. Tsurekawa, Tadao Watanabe, N. Tamari, 2004 .

Oxidation Behavior of Spinel/Silicon Carbide Whisker Composite Ceramics

Takahiro Tanaka, I. Kondoh, N. Tamari, 1994 .

Effect of the surface structure of Si-Ti-C-O fiber on the properties of three-dimensional fiber-reinforced silicon carbide composites

Takahiro Tanaka, M. Iwasa, I. Kondoh, 1997 .

Fabrication of Silicon Carbide Ceramics Added with Boron and Carbon by Spark-Plasma-Sintering and Their Mechanical Properties

Y. Makino, Takahiro Tanaka, I. Kondoh, 2000 .

High quantum efficiency InGaAsP/InP lasers

L. Coldren, B. Miller, H. Shtrikman, 1982 .

High power single mode InGaAsP lasers fabricated by single step liquid phase epitaxy

M. Oron, N. Tamari, 1983 .