D. Iba

发表

Networks of tooth helix deviations of ground and super-finished gears - Phase edges and intensity vertices

Myongsoo Kim, D. Iba, H. Inoue, 2019 .

Nonlinear piezoelectric impedance modulation induced by a contact-type failure and its application in crack monitoring

Akira Sone, Daisuke Iba, Arata Masuda, 2011 .

Basic Study on Calculation of Cutting Forces Useful for Reducing Vibration in Skiving

Daisuke Iba, Morimasa Nakamura, Ichiro Moriwaki, 2017 .

Visualization of phase differences between tooth helix deviations using graph theory

D. Iba, H. Inoue, H. Noda, 2019, Forschung im Ingenieurwesen.

Design of Passive Suspension System of Railway Vehicles via Control Theory

A. Masuda, D. Iba, A. Sone, 2008 .

Vibration Control of Nuclear Components Using Simply Supported Dynamic Damper

A. Masuda, D. Iba, A. Sone, 2003 .

Application of genetic algorithms for parameters identification in a developing smart gear system

A. Masuda, D. Iba, I. Moriwaki, 2022, Forschung im Ingenieurwesen.

Tribological Properties of a Mesh-Like Nanostructured Diamond-Like Carbon (DLC) Lubricated with a Fully Formulated Oil at DLC/Steel Contacts under Boundary Lubrication

S. Sasaki, H. Moriguchi, D. Iba, 2021, Coatings.

Nonlinear oscillator design based on phase reduction method for closed‐loop system

D. Iba, Junichi Hongu, 2022 .

Relation of nonlinear oscillator design based on phase reduction method and fractional derivative

D. Iba, Junichi Hongu, 2022, International Journal of Adaptive Control and Signal Processing.

D11 Control System for Dynamic Absorber using Neural Oscillator and its Application to Single Degree of Freedom Model

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2013 .

Vibration-based plastic-gear crack detection system using a convolutional neural network - Robust evaluation and performance improvement by re-learning

Nanako Miura, Akira Sone, Daisuke Iba, 2020, Journal of Advanced Mechanical Design, Systems, and Manufacturing.

Failure Detection of Plastic Gears Based on a Comparison of Fourier Coefficients of a Gear Mesh Vibration Model by Rectangle Pulse Train and Frequency Analysis of Acceleration Response

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2013 .

Hobbing-Machine-Diagnosis system with artificial intelligence (Learning-data collection through hobbing simulation and their compression with network representation)

Daisuke Iba, Ichiro Moriwaki, Koichiro Uriu, 2020, Transactions of the JSME (in Japanese).

Graph of correlation function between helix form deviations of helical gears

Myungsoo Kim, D. Iba, H. Noda, 2018 .

Crack detection of plastic gears using a convolutional neural network pre-learned from images of meshing vibration data with transfer learning

B. H. Kien, A. Masuda, D. Iba, 2019, Forschung im Ingenieurwesen.

Raman tensor analysis of hexagonal polyoxymethylene and its application to study the molecular arrangement in highly crystalline electrospun nanofibers

M. Kotaki, G. Pezzotti, D. Iba, 2012 .

Active mass damper using phase and amplitude of mean field of oscillators

Daisuke Iba, Junichi Hongu, Takuya Wada, 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Active mass damper system for high-rise buildings using neural oscillator and position controller: generation method for desired stroke of auxiliary mass using synchronous detection

Daisuke Iba, Junichi Hongu, D. Iba, 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Active mass damper system for high-rise buildings using neural oscillator and position controller: sinusoidally varying desired displacement of auxiliary mass intended for reduction of maximum control force

Daisuke Iba, Jyunichi Hongu, Sohei Shima, 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Experimental evaluation of a control system for active mass dampers consisting of a position controller and neural oscillator

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2016 .

Active mass damper system for high-rise buildings using neural oscillator and position controller considering stroke limitation of the auxiliary mass

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

An active mass damper operated by a system consisting of a neural oscillator and PD controller (A design method of a PD controller for vibration mitigation with consideration of acceleration responses of an auxiliary mass)

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2016 .

A driven active mass damper by using output of a neural oscillator (effects of position control system changes on vibration mitigation performance)

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2015, Smart Structures.

A DESIGN METHOD OF A PD CONTROLLER FOR USE IN AN ACTIVE MASS DAMPER SYSTEM INCORPORATING A NEURAL OSCILLATOR

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2015 .

Structural vibration control using an active mass damper operated by a combination system of a neural oscillator and position controller

Daisuke Iba, Junichi Hongu, Morimasa Nakamura, 2015 .

Synchronization of Matsuoka Neural Oscillator to Meshing Frequency for Estimation of Angular Position of Gears

Daisuke Iba, D. Iba, 2015 .

Experimental evaluation of a neural-oscillator-driven active mass damper system

Daisuke Iba, Junichi Hongu, D. Iba, 2014, Smart Structures.

Fundamental study on detection of plastic-gear-failure signs (synchronization of a nonlinear oscillator to mesh frequency)

Akira Sone, Daisuke Iba, Arata Masuda, 2014 .

DEVELOPMENT OF CONTROL SYSTEM FOR DYNAMIC ABSORBER USING NEURAL OSCILLATOR AND POSITION CONTROLLER

D. Iba, I. Moriwaki, T. Senda, 2013 .

Mutual synchronization between structure and central pattern generator

Daisuke Iba, Junichi Hongu, D. Iba, 2012, Smart Structures.

Synchronization of structure and neural oscillator perPaper Title Line 1

D. Iba, I. Moriwaki, J. Hongu, 2012 .

Crack detection of plastic gears using a convolutional neural network pre-learned from images of meshing vibration data with transfer learning

B. H. Kien, D. Iba, Y. Ishii, 2019, Forschung im Ingenieurwesen.

Effect of image size on performance of a plastic gear crack detection system based convolutional neural networks: an experimental study

B. H. Kien, D. Iba, A. Masuda, 2020, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

UV-curing and thermal ageing of methacrylated stereo-lithographic resin

K. Kinashi, E. Marin, G. Pezzotti, 2021 .

Method to Improve Adaptation Speed of Control Parameters for Active Control Pantographs

Daisuke Iba, Arata Masuda, Takayuki Usuda, 2016 .

Detection and localization of contact-type damages via nonlinear impedance modulation of piezoelectric materials bonded on a beam structure

Akira Sone, Daisuke Iba, Arata Masuda, 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Time-resolved ex situ Raman/FT-IR spectroscopic study of structural changes in polymeric gears during operation: Towards the development of operando spectroscopic systems for polymer gears

D. Iba, I. Moriwaki, S. Sasaki, 2022, Polymer Testing.

Identification of Q value and angular frequency of smart gear antenna using the resonant return loss of the receiving antenna

A. Masuda, N. Miura, D. Iba, 2022, SN Applied Sciences.

Tribological properties of 100% cellulose nanofiber (CNF) molding under dry- and boundary lubrication-conditions at CNF/steel contacts

K. Sato, K. Yamada, D. Iba, 2023, Cellulose.

Effects of shaft angle on cutting tool parameters in internal gear skiving

Koichiro Uriu, D. Iba, I. Moriwaki, 2017, Journal of Mechanical Science and Technology.

Study on design of taper shaped skiving cutters for internal gears (Taper shaped cutter ground with trapezoidal wheels used for pinion cutter grinding)

Koichiro Uriu, D. Iba, I. Moriwaki, 2017 .

New measuring method for single pitch deviation of hobbed gears (Using measured helix form data conditioned with Gaussian filter)

Daisuke Iba, Myungsoo Kim, Tomohiro Tatsumi, 2016 .

Visualization of phase differences between tooth helix deviations using graph theory

D. Iba, H. Inoue, H. Noda, 2019, Forschung im Ingenieurwesen.

Development of a contact-type probe for measurements of ultra-fine-pitch gears and application to pseudo roughness evaluation

Myongsoo Kim, D. Iba, I. Moriwaki, 2017 .

Development of a contact-type probe for measurements of ultra-fine-pitch gears and application to pseudo roughness evaluation

Myongsoo Kim, D. Iba, I. Moriwaki, 2017, Journal of Mechanical Science and Technology.

Measurement of tooth flanks with a gear measuring instrument and evaluation of its surface texture (Effect of different probe profiles on measurement results)

Myungsoo Kim, D. Iba, I. Moriwaki, 2017 .