Ç. Yıldırım

发表

A novel biomimetic wing design and optimizing aerodynamic performance

M. Uzun, Mustafa Özdemir, Ç. Yıldırım, 2022, Journal of Aviation.

Effect of Nanofluid on Cutting Temperature in Turning of Inconel 625 with Ceramic Tools

Ç. Yıldırım, 2019 .

Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy

T. Kıvak, Murat Sarıkaya, Ç. Yıldırım, 2020 .

Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel

T. Kıvak, Murat Sarıkaya, Ç. Yıldırım, 2020 .

Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of Hastelloy X

T. Kıvak, Ç. Yıldırım, Emine Şirin, 2021 .

Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL

Ç. Yıldırım, 2020 .

Europeanization under Membership Uncertainty: The Cases of Environmental and Energy Policy in Turkey

V. Ediger, Ç. Yıldırım, A. Baysan, 2013 .

Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL

T. Kıvak, Murat Sarıkaya, Ç. Yıldırım, 2021 .

Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles

T. Kıvak, Murat Sarıkaya, Ç. Yıldırım, 2020 .

Investigation of the characteristic properties of graphene-based nanofluid and its effect on the turning performance of Hastelloy C276 nickel alloy

Murat Sarıkaya, Ç. Yıldırım, V. Anandan, 2022, Wear.

Whither synchronization?: The European Union transport policy and Turkey

Ç. Yıldırım, 2012 .

A comparative study on the tribological behavior of mono&proportional hybrid nanofluids for sustainable turning of AISI 420 hardened steel with cermet tools

T. Kıvak, Murat Sarıkaya, Ç. Yıldırım, 2022, Journal of Manufacturing Processes.

Influence of MoS2 based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy

T. Kıvak, M. Gupta, Murat Sarıkaya, 2021, Journal of Materials Research and Technology.

The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625

Turgay Kıvak, Murat Sarıkaya, T. Kıvak, 2019, Tribology International.

Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL

Turgay Kıvak, Murat Sarıkaya, T. Kıvak, 2020 .

Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625

Ç. Yıldırım, Çağrı Vakkas Yıldırım, 2019, Tribology International.

Resource conservation and sustainable development in the metal cutting industry within the framework of the green economy concept: An overview and case study

Navneet Khanna, Ç. Yıldırım, S. Dağlı, 2022, Sustainable Materials and Technologies.

Performance of cryogenically treated carbide inserts under sustainable cryo-lubrication assisted milling of Inconel X750 alloy

T. Kıvak, Ç. Yıldırım, Şenol Şirin, 2021 .

Influence of Different Cooling Methods on Tool Life, Wear Mechanisms and Surface Roughness in the Milling of Nickel-Based Waspaloy with WC Tools

F. Erzincanli, T. Kıvak, Ç. Yıldırım, 2019, Arabian Journal for Science and Engineering.

A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys

G. Królczyk, D. Pimenov, Navneet Khanna, 2021, CIRP Journal of Manufacturing Science and Technology.

Determination of MQL Parameters Contributing to Sustainable Machining in the Milling of Nickel-Base Superalloy Waspaloy

Turgay Kıvak, Fehmi Erzincanlı, Murat Sarıkaya, 2017 .

Performance evaluation of whisker-reinforced ceramic tools under nano-sized solid lubricants assisted MQL turning of Co-based Haynes 25 superalloy

T. Kıvak, M. Gupta, Ç. Yıldırım, 2021 .

Tool wear and surface roughness analysis in milling with ceramic tools of Waspaloy: a comparison of machining performance with different cooling methods

Turgay Kıvak, Fehmi Erzincanlı, F. Erzincanli, 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Influence of graphene nanofluid on various environmental factors during turning of M42 steel

M. Babu, Ç. Yıldırım, V. Anandan, 2021, Journal of Manufacturing Processes.

Optimization of MQL Parameters Using the Taguchi Method in Milling of Nickel Based Waspaloy

I. Uygur, F. Erzincanli, T. Kıvak, 2017 .

Determination of MQL Parameters Contributing to Sustainable Machining in the Milling of Nickel-Base Superalloy Waspaloy

T. Kıvak, Ç. Yıldırım, M. Sarıkaya, 2017, The Arabian journal for science and engineering.

Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL

Sudhansu Ranjan Das, M. Babu, Ç. Yıldırım, 2022, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Experimental Investigation on the Effect of Dry and Multi-Jet Cryogenic Cooling on the Machinability and Hole Accuracy of CFRP Composites

D. Pimenov, S. Wojciechowski, Navneet Khanna, 2022, Journal of Materials Research and Technology.

Analysis of machinability and sustainability aspects while machining Hastelloy C4 under sustainable cutting conditions

Navneet Khanna, Ç. Yıldırım, Şenol Şirin, 2023, Sustainable Materials and Technologies.

An attempt towards green machining of Ni-based Hastelloy C4 alloy: Effect of vegetable oils and their combination with TiO2 and SiO2 nanoparticles on outputs

T. Kıvak, Ç. Yıldırım, H. Ekmel Ercan, 2023, Sustainable Materials and Technologies.