Vincenzo Nigrelli

发表

TOPOLOGY OPTIMIZATION OF A CONNECTING ROD FOR AN INTERNAL COMBUSTION ENGINE

Tommaso Ingrassia, Elio Lombardo, Vincenzo Nigrelli, 2009 .

Design Of A New High Energy Rear UnderrunProtective Device

Tommaso Ingrassia, Vincenzo Nigrelli, Francesco Cappello, 2008 .

Redesign of a Reverse Shoulder Prosthesis: Kinematic and Mechanical Study

Davide Tumino, Tommaso Ingrassia, Vincenzo Nigrelli, 2014 .

Process parameters influence in additive manufacturing

Tommaso Ingrassia, Vincenzo Nigrelli, V. Ricotta, 2017 .

3D Data Acquisition and Numerical Analysis of a Footwear in Walking

Salvatore Gerbino, Massimo Martorelli, Vincenzo Nigrelli, 2004 .

A new design approach to the use of composite materials for heavy transport vehicles

Tommaso Ingrassia, Antonio Mancuso, Vincenzo Nigrelli, 2007 .

Defect characterization in Al welded joints by non-contact Lamb wave technique

Donatella Cerniglia, Vincenzo Nigrelli, M. Arone, 2006 .

Biomechanical analysis of the humeral tray positioning in reverse shoulder arthroplasty design

Tommaso Ingrassia, Vincenzo Nigrelli, Lorenzo Nalbone, 2018 .

Thermal stress analysis of different full and ventilated disc brakes

Tommaso Ingrassia, Vincenzo Nigrelli, V. Ricotta, 2015 .

Un nuovo strumento per lo studio dei risultati di analisi FEM

Tommaso Ingrassia, Vincenzo Nigrelli, Antonio Mancuso, 2005 .

Approccio Metodico alla Riprogettazione di un Semirimorchio

Tommaso Ingrassia, Vincenzo Nigrelli, Antonio Mancuso, 2003 .

Numerical prediction of ventilated planing flat plates for the design of Air Cavity Ships

Filippo Cucinotta, Felice Sfravara, Vincenzo Nigrelli, 2018 .

A comparison of simplex and simulated annealing for optimization of a new rear underrun protective device

Tommaso Ingrassia, Vincenzo Nigrelli, Rosario Buttitta, 2013, Engineering with Computers.

Conceptual Design by TRIZ: An Application to a Rear Underrun Protective Device for Industrial Vehicle

Donatella Cerniglia, Elio Lombardo, Vincenzo Nigrelli, 2008 .

A multi-technique simultaneous approach for the design of a sailing yacht

Davide Tumino, Tommaso Ingrassia, Antonio Mancuso, 2017 .

Behaviour of a speargun with a novel muzzle Comportamento di un fucile subacqueo con testata innovativa

Tommaso Ingrassia, Vincenzo Nigrelli, M. Mucera, 2013 .

A virtual concept of city car

Tommaso Ingrassia, Vincenzo Nigrelli, T Ingrassia, 2008 .

Surface Measurement by Digital Image Correlation Technique

Vincenzo Nigrelli, Nigrelli Va, Salvatore Pasta, 2008 .

A new haptic-based tool for training in medicine.

Tommaso Ingrassia, Vincenzo Nigrelli, Nigrelli Va, 2008 .

Numerical study of the components positioning influence on the stability of a reverse shoulder prosthesis

Davide Tumino, Tommaso Ingrassia, Antonio Mancuso, 2012 .

Braking procedure analysis of a pegs-wing ventilated disk brake rotor

Gabriele Virzi' Mariotti, Vincenzo Nigrelli, Cedomir Duboka, 2006 .

New Customized Elbow Orthosis Made by Additive Manufacturing

Tommaso Ingrassia, R. I. Campbell, Vincenzo Nigrelli, 2019, Advances on Mechanics, Design Engineering and Manufacturing II.

Fluid–structure interaction of downwind sails: a new computational method

Tommaso Ingrassia, Antonino Cirello, Filippo Cucinotta, 2019 .

Finite element reanalysis in virtual reality environments

Francesco Cappello, Antonio Mancuso, Tommaso Ingrassia, 2005 .

Influence of the metaphysis positioning in a new reverse shoulder prosthesis

Tommaso Ingrassia, Vincenzo Nigrelli, V. Ricotta, 2017 .

NUMERICAL FATIGUE LIFE EVALUATION OF AN INNOVATIVE INTERNAL COMBUSTION ENGINE SHAFT

Tommaso Ingrassia, Elio Lombardo, Vincenzo Nigrelli, 2011 .

A preliminary method for the numerical prediction of the behavior of air bubbles in the design of Air Cavity Ships

Filippo Cucinotta, Felice Sfravara, Vincenzo Nigrelli, 2017 .

Kansei Engineering and Virtual Reality in Conceptual Design

Tommaso Ingrassia, Elio Lombardo, Vincenzo Nigrelli, 2008 .

On the history of torsional stress concentrations in shafts: From electrical analogies to numerical methods

Giuseppe Pitarresi, Vincenzo Nigrelli, Augusto Ajovalasit, 2014 .

Simulation of the Behaviour of a New Semitrailer with Structural Load-Carrying Platform in Composite Material

Tommaso Ingrassia, Vincenzo Nigrelli, Francesco Cappello, 2004 .

Evaluation of Clutch Plate Integrity with Non-Destructive Methods

Donatella Cerniglia, Elio Lombardo, Vincenzo Nigrelli, 2009 .

Integrated Computer-Aided Innovation: The PROSIT approach

Maurizio Muzzupappa, Umberto Cugini, Gaetano Cascini, 2009, Comput. Ind..

Finite element analysis of two total knee joint prostheses

Davide Tumino, Tommaso Ingrassia, Vincenzo Nigrelli, 2013 .

Improving the Downwind Sail Design Process by Means of a Novel FSI Approach

Davide Tumino, Antonino Cirello, Tommaso Ingrassia, 2021 .

Generative Design for Additively Manufactured Textiles in Orthopaedic Applications

Tommaso Ingrassia, Vincenzo Nigrelli, R. Ian Campbell, 2021, Lecture Notes in Mechanical Engineering.

Numerical simulations on periprosthetic bone remodeling: a systematic review

Stefano Zaffagnini, Tommaso Ingrassia, Vincenzo Nigrelli, 2021, Comput. Methods Programs Biomed..

Detection of Disbonds in Multi-layer Structures by Laser-Based Ultrasonic Technique

Donatella Cerniglia, Vincenzo Nigrelli, Nicola Montinaro, 2008 .

Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes

Salvatore Pasta, Vincenzo Nigrelli, V. Nigrelli, 2008 .

Quantitative subsurface defect detection in composite materials using a non-contact ultrasonic system

Donatella Cerniglia, Vincenzo Nigrelli, B. Boro Djordjevic, 2001, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263).