Ahmadreza Hosseini Tazehkandi

On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706

Mohammadreza Shabgard, M. Shabgard, Ahmadreza Hosseini Tazehkandi, 2015 .

Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools

Behnam Davoodi, B. Davoodi, Ahmadreza Hosseini Tazehkandi, 2014 .

Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid

Behnam Davoodi, B. Davoodi, Ahmadreza Hosseini Tazehkandi, 2014 .

Application of liquid nitrogen and spray mode of biodegradable vegetable cutting fluid with compressed air in order to reduce cutting fluid consumption in turning Inconel 740

Mohammadreza Shabgard, M. Shabgard, Ahmadreza Hosseini Tazehkandi, 2015 .

Investigation of the influences of polycrystalline cubic boron nitride (PCBN) tool on the reduction of cutting fluid consumption and increase of machining parameters range in turning Inconel 783 using spray mode of cutting fluid with compressed air

G. Kiani, M. Shabgard, Ahmadreza Hosseini Tazehkandi, 2016 .