Bing Wang

发表

Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools

Zhanqiang Liu, Y. Wan, Q. Song, 2021, Journal of advanced research.

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Zhanqiang Liu, Q. Song, Yukui Cai, 2022, Materials.

Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining

Zhanqiang Liu, X. Ai, Q. Song, 2015 .

The influence of turning and burnishing on corrosion resistance of laser cladded Fe–Cr–Ni layer from viewpoints of thermodynamics and kinetics

Peirong Zhang, Bing Wang, Guosheng Ji, 2022, Archives of Civil and Mechanical Engineering.

Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process

Jinfu Zhao, Bing Wang, Zhanqiang Liu, 2023, Journal of Alloys and Compounds.

Improving thermal conductivity of Inconel 718 through thermoelectric coupling to reduce cutting temperature

Zhanqiang Liu, Q. Song, Yukui Cai, 2022, Journal of Materials Research and Technology.

Prediction Modelling of Cutting Force in Rotary Ultrasonic End Grinding 2.5D Woven SiO2f/SiO2 Ceramic Matrix Composite

Q. Song, Yukui Cai, Bing Wang, 2022, Composite Structures.

Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V

Bing Wang, Zhanqiang Liu, 2014, The International Journal of Advanced Manufacturing Technology.

In-situ DIC measurement of material deformation through spatial-temporal kinematics analysis during orthogonal cutting Ti6Al4V

Q. Song, Bing Wang, K. Ma, 2022, Measurement.

Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy

Bing Wang, Jintao Niu, Guijie Wang, 2019, The International Journal of Advanced Manufacturing Technology.

Longitudinal amplitude effect on material removal mechanism of ultrasonic vibration-assisted milling 2.5D C/SiC composites

Zhanqiang Liu, Q. Song, Bing Wang, 2021, Ceramics International.

Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assisted side milling 2.5D C/SiC composites

Zhanqiang Liu, Q. Song, Yukui Cai, 2022, Composite Structures.

Effect of oxygen on Te infiltration into superalloy Inconel 718 at elevated temperature

Zhanqiang Liu, Bing Wang, Guo-ying Li, 2021 .

The influence of turning and burnishing on corrosion resistance of laser cladded Fe–Cr–Ni layer from viewpoints of thermodynamics and kinetics

Peirong Zhang, Bing Wang, Guosheng Ji, 2022, Archives of Civil and Mechanical Engineering.

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Q. Song, Yukui Cai, Bing Wang, 2022, Ceramics International.

Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review

Z. Xiong, Zhanqiang Liu, Xichun Luo, 2021, International Journal of Machine Tools and Manufacture.

Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Superalloy GH4169

Zhanqiang Liu, Q. Song, Xiaoping Ren, 2021, Metals.

Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review

Bing Wang, Zhanqiang Liu, 2018, The International Journal of Advanced Manufacturing Technology.

Microstructural characteristics, deformation behavior and mechanical properties of Inconel 718 treated by Te infiltration

Zhanqiang Liu, Bing Wang, Guo-ying Li, 2022, Journal of Alloys and Compounds.

Study on the infiltration mechanism of tellurium into the Inconel 718

Bing Wang, Zhanqiang Liu, G. Li, 2023, Journal of Materials Science.

Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance

Zhanqiang Liu, Xichun Luo, Q. Song, 2022, Optics & Laser Technology.

Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction

Chuanqi Zhang, Xichun Luo, Q. Song, 2023, Applied Surface Science.

Phase transition and dynamic recrystallization mechanisms of white layer formation during turning superalloy Inconel 718

Zhanqiang Liu, A. Khan, Shibo Zhang, 2021, Journal of Materials Research and Technology.

Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review

Q. Song, Yukui Cai, Bing Wang, 2020, The International Journal of Advanced Manufacturing Technology.

Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718

Zhanqiang Liu, Y. Wan, Q. Song, 2022, Tribology International.

Friction behaviors in the metal cutting process: state of the art and future perspectives

Chunjin Wang, Xiaoliang Liang, Bing Wang, 2022, International Journal of Extreme Manufacturing.

Tool wear induced the gradient distribution of surface integrity with process-microstructure-property characteristics after turning Ti-6Al-4 V

Zhanqiang Liu, Xiaoliang Liang, Xiaoping Ren, 2021, Journal of Manufacturing Processes.

Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process

Q. Song, Yukui Cai, Xiaoping Ren, 2023, Journal of Manufacturing Processes.

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

Q. Song, Yukui Cai, Xiaoping Ren, 2022, The International Journal of Advanced Manufacturing Technology.

An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718

Y. Wan, Q. Song, Xiaoping Ren, 2019, International Journal of Precision Engineering and Manufacturing-Green Technology.

Surface texture and friction property of Ti-6Al-4V processed by rotary ultrasonic rolling

Zhanqiang Liu, Bing Wang, Jian Zhao, 2021, The International Journal of Advanced Manufacturing Technology.

Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining

Qibiao Yang, Bing Wang, Zhanqiang Liu, 2014, The International Journal of Advanced Manufacturing Technology.

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Q. Song, Bing Wang, Zhanqiang Liu, 2022, Archives of Civil and Mechanical Engineering.

Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties

Xichun Luo, Q. Song, Yukui Cai, 2023, Optics & Laser Technology.

A rate-dependent damage model to characterize dynamic fracture behavior of Ti6Al4V under high strain rate loading

Zhanqiang Liu, Q. Song, Jinfu Zhao, 2022, Engineering Fracture Mechanics.

Effects of sidewall roughness on mixing performance of zigzag microchannels

Zhanqiang Liu, Yukui Cai, Bing Wang, 2022, Chemical Engineering and Processing.

Enhancement of Te infiltration into Inconel 718 surface layer through dynamic microwave thermal shock

Zhanqiang Liu, Bing Wang, Guo-ying Li, 2022, Applied Surface Science.

Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums

Zhanqiang Liu, Bing Wang, Qingan Yin, 2021 .

Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructures for drag reduction

Q. Song, Yukui Cai, Bing Wang, 2022, Surfaces and Interfaces.

Numerical analysis of residual stresses induced by cold spray fabricating cBN-reinforced Ni matrix composites

Yukui Cai, Jinfu Zhao, Bing Wang, 2023, Surface and Coatings Technology.

Effect of Coating Thickness on the Bond Strength of Cold-Sprayed Ni-Based cBN Coating on 42CrMo Substrate

Q. Song, Yukui Cai, Bing Wang, 2023, Journal of Thermal Spray Technology.

Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining

Y. Wan, Q. Song, Bing Wang, 2015, The International Journal of Advanced Manufacturing Technology.

Curing behaviors and mechanical properties of SiC-whisker-reinforced alumina ceramics fabricated with digital light processing

Q. Song, Yukui Cai, Jinfu Zhao, 2023, Journal of Materials Research and Technology.

Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

Zhanqiang Liu, Q. Song, Yukui Cai, 2022, The International Journal of Advanced Manufacturing Technology.

Gallium-based liquid metal hybridizing MoS2 nanosheets with reversible rheological characteristics and enhanced lubrication properties

G. Dong, Q. Song, Bing Wang, 2023, RSC Advances.

Effect of Cutting Parameters on Tool Chipping Mechanism and Tool Wear Multi-Patterns in Face Milling Inconel 718

Bing Wang, Zhanqiang Liu, D. Liu, 2022, Lubricants.

A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process

A. Khan, Y. Wan, Q. Song, 2023, Journal of Manufacturing Systems.

Size-dependent responses of micro-end mill based on strain gradient elasticity theory

Y. Wan, Q. Song, Bing Wang, 2018, The International Journal of Advanced Manufacturing Technology.

Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review

Q. Song, Yukui Cai, Bing Wang, 2024, Machining Science and Technology.

Strain rate effect on material deformation and removal behavior during high speed scratching of 4H-SiC

Q. Song, Yukui Cai, Bing Wang, 2023, Tribology International.

Leveraging artificial intelligence for real-time indirect tool condition monitoring: From theoretical and technological progress to industrial applications

Bing Wang, Zhanqiang Liu, Delin Liu, 2024, International Journal of Machine Tools and Manufacture.

Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J–C Constitutive Relation Simulation Model

Xiaoping Ren, Bing Wang, Zhanqiang Liu, 2024, Coatings.

A new characterization methodology for assessing machinability through cutting energy consumption

Bing Wang, Zhanqiang Liu, Delin Liu, 2024, CIRP Journal of Manufacturing Science and Technology.

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

Heng Ji, Q. Song, Xiaoliang Liang, 2023, Micromachines.

Response prediction of cantilever plates via mode superposition method and combination method of beam functions

Q. Song, Yukui Cai, Bing Wang, 2023, Mechanical Systems and Signal Processing.

Prediction of Isotropic Rough Surface Directional Spectral Emissivity with Surface-Morphology-Dependent Modelling

Jinfu Zhao, Jianrui Hu, Bing Wang, 2023, Metals.