Simon Bickerton

发表

A 2.5 Simulation of the Resin Infusion Process addressing complex reinforcement compaction response

Bart Verleye, Piaras Kelly, Simon Bickerton, 2010 .

Digital speckle photogrammetry

John Morris, Simon Bickerton, Yizhe Lin, 2006 .

Simulation and Verification of Local and Global Forces Exerted on Rigid LCM Tools

Piaras Kelly, Simon Bickerton, William Walbran, 2008 .

Numerical Permeability Prediction of Woven Textiles at Different Compaction Levels

Piaras Kelly, Simon Bickerton, William Walbran, 2013 .

Applying Bi-level Multi-Objective Evolutionary Algorithms for Optimizing Composites Manufacturing Processes

Matthias Ehrgott, Abhishek Gupta, Simon Bickerton, 2013, EMO.

A 2.5D Model of the Resin Infusion Process, Experiments and Simulation

Bart Verleye, Piaras Kelly, Simon Bickerton, 2010 .

Using micro-CT to quantitatively validate the textile compaction simulation

Piaras Kelly, Simon Bickerton, Kamran A. Khan, 2018, IOP Conference Series: Materials Science and Engineering.

Predicting Stress Distributions Exerted on LCM Tools using Visco-elastic Compaction Models

Piaras Kelly, Simon Bickerton, William Walbran, 2007 .

Automated Geometric Characterisation of Woven Reinforcing Textiles using Image Analysis Techniques

Rajnish N. Sharma, Piaras Kelly, Simon Bickerton, 2013 .

Neural network versus Kriging, surrogate models for LCM process optimisation

Matthias Ehrgott, Abhishek Gupta, Simon Bickerton, 2012 .

Thermal Characterisation of a Double-D Pad

Seho Kim, Simon Bickerton, Grant Covic, 2019, 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW).

Transverse compression properties of textile materials, International conference on textile engineering and materials

Piaras Kelly, Simon Bickerton, Jonathan Cheng, 2011 .

Simulation of force and velocity controlled compression RTM

Bart Verleye, Piaras Kelly, Simon Bickerton, 2010 .

Real-time sensing and control of resin flow in liquid injection molding processes

Kim A. Stelson, Suresh G. Advani, Simon Bickerton, 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

Global Optimization of Mould Filling Parameters during the Constant Speed Injection Compression Moulding Process

Piaras Kelly, Simon Bickerton, Sam Na, 2008 .

Modelling Forces Acting on Rigid, Non-planar Liquid Composite Moulding Tools

Piaras Kelly, Simon Bickerton, 2005 .

Application of a Complete Tooling Force Analysis for Simulation of Liquid Composite Moulding Processes

Piaras Kelly, Simon Bickerton, 2007 .

The RTM-Light Manufacturing Process: Experimentation and Modelling

Piaras Kelly, Simon Bickerton, Oliver J. Maclaren, 2009 .

Textile Simulations for Virtual Composite Materials Manufacturing

Piaras Kelly, Simon Bickerton, Todd M. Allen, 2017 .

Thermal Evaluation of an Inductive Power Transfer Pad for Charging Electric Vehicles

Seho Kim, Duleepa Thrimawithana, Simon Bickerton, 2022, IEEE Transactions on Industrial Electronics.

Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part I. Experiments

Suresh G. Advani, Simon Bickerton, S. Advani, 2000 .

Numerical and experimental study on deformation of 3D-printed polymeric functionally graded plates: 3D-Digital Image Correlation approach

Brian R. Mace, Simon Bickerton, Raj Das, 2019, Composite Structures.

Experimental analysis and numerical modeling of flow channel effects in resin transfer molding

Suresh G. Advani, Simon Bickerton, S. Advani, 2000 .

Compression resin transfer moulding (CRTM) in polymer matrix composites

Piaras Kelly, Simon Bickerton, P. Kelly, 2012 .

A comprehensive filling and tooling force analysis for rigid mould LCM processes

Piaras Kelly, Simon Bickerton, P. Kelly, 2009 .

Measurements of normal stress distributions experienced by rigid liquid composite moulding tools

Piaras Kelly, Simon Bickerton, William Walbran, 2009 .

Enhancement of convective heat transfer to polymer manufacturing molds

Debes Bhattacharyya, Simon Bickerton, D. Bhattacharyya, 2005 .

Characterization of corner and edge permeabilities during mold filling in resin transfer molding

Suresh G. Advani, Simon Bickerton, S. Advani, 1995 .

Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part

Suresh G. Advani, Pavel Simacek, Simon Bickerton, 1997 .

Reducing setup costs: Tooling force prediction in resin transfer moulding (RTM) and compression RTM

Bart Verleye, Piaras Kelly, Simon Bickerton, 2009 .

Compression flow permeability measurement: a continuous technique

Simon Bickerton, M. J. Buntain, 2003 .

Simulation of the reinforcement compaction and resin flow during the complete resin infusion process

Piaras Kelly, Simon Bickerton, Quentin Govignon, 2010 .

Compression deformation of a biaxial stitched glass fibre reinforcement: Visualisation and image analysis using X-ray micro-CT

Debes Bhattacharyya, Simon Bickerton, A. A. Somashekar, 2011 .

Prediction and experimental verification of normal stress distributions on mould tools during Liquid Composite Moulding

Bart Verleye, Piaras Kelly, Simon Bickerton, 2012 .

Viscoelastic response of dry and wet fibrous materials during infusion processes

Piaras Kelly, Simon Bickerton, Rehan Umer, 2006 .

Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part II. Predictions and comparisons with experiments

Suresh G. Advani, Pavel Simacek, Simon Bickerton, 2000 .

Spatial compaction and saturated permeability spacial variations of fibre reinforcements

Christophe Binetruy, Patricia Krawczak, Simon Bickerton, 2008 .

Modelling and simulation of resin transfer moulding (RTM)—gate control, venting and dry spot prediction

Suresh G. Advani, Simon Bickerton, S. Advani, 1996 .

Impact of Stitching Processes on the Compaction Behavior of Glass Fiber Reinforcements

Hubert C Stadtfeld, Simon Bickerton, Peter Mitschang, 2006 .

Rotational molding cycle time reduction using a combination of physical techniques

Debes Bhattacharyya, Simon Bickerton, D. Bhattacharyya, 2009 .

Modeling and evaluation of the filling stage of injection/compression moulding

Simon Bickerton, M. Z. Abdullah, S. Bickerton, 2003 .

Simulation and experimental validation of force controlled compression resin transfer molding

Bart Verleye, Piaras Kelly, Simon Bickerton, 2011 .

Simulating the effect of temperature elevation on clamping force requirements during rigid-tool Liquid Composite Moulding processes

Piaras Kelly, Simon Bickerton, Abhishek Gupta, 2012 .

Complete simulation process chain for the manufacturing of braided composite parts

Piaras Kelly, Simon Bickerton, Roland Hinterhölzl, 2017 .

Full field monitoring of the resin flow and laminate properties during the resin infusion process

Piaras Kelly, Simon Bickerton, Quentin Govignon, 2008 .

Resin infusion/liquid composite moulding (LCM) of advanced fibre-reinforced polymer (FRP)

Piaras Kelly, Simon Bickerton, Quentin Govignon, 2013 .

Experimental investigation into the post-filling stage of the resin infusion process

Piaras Kelly, Simon Bickerton, Quentin Govignon, 2013 .

The viscoelastic compression behavior of liquid composite molding preforms

Simon Bickerton, A. A. Somashekar, S. Bickerton, 2003 .

Modeling forces generated within rigid liquid composite molding tools. Part B: Numerical analysis

Simon Bickerton, S. Bickerton, Michael Buntain, 2007 .