C. G'sell

发表

Application of the plane simple shear test for determination of the plastic behaviour of solid polymers at large strains

Christian G'Sell, S. Shrivastava, C. G'sell, 1983 .

In situ observation of the spherulite deformation in polybutene-1 (Modification I)

C. G'sell, J. Haudin, E. Weynant, 1980 .

Volume strain changes of plasticized poly(vinylidene fluoride) during tensile and creep tests

S. Elkoun, L. Cangémi, C. G'sell, 2004 .

Determination of the intrinsic stress/strain equation of thin polymer films from stretching experiments under plane-strain tension

A. Márquez-Lucero, C. G'sell, 1993 .

Diagnostic accuracy of cervicovaginal interleukin-6 and interleukin-6:albumin ratio as markers of preterm delivery.

A. Woodworth, A. Gronowski, C. G'sell, 2007, Clinical chemistry.

Mechanical properties of NBR/clay nanocomposites by using a novel testing system

N. Ren, Yudong Huang, Ahmad Mohaddespour, 2009 .

Volume variation process of high-density polyethylene during tensile and creep tests

C. G'sell, J. Hiver, F. Addiego, 2006 .

Low frequency Raman scattering study of the nanostructure of plastically deformed polymer glasses

S. Etienne, C. G'sell, E. Duval, 1996 .

Flow localization and the determination of constitutive relations in highly drawn polymers: one-dimensional Eulerian formulation of the effect of stress triaxiality

J. Jonas, A. Márquez-Lucero, P. Gilormini, 1985 .

Thermooxidative aging of polyoxymethylene, part 2: Embrittlement mechanisms

J. Verdu, B. Fayolle, C. G'sell, 2009 .

Plastic banding in glassy polycarbonate under plane simple shear

C. G'sell, A. J. Gopez, 1985 .

Effect of the tooth microstructure on the shear bond strength of a dental composite.

C. G'sell, M. Panighi, 1993, Journal of biomedical materials research.

Slow crack propagation in polyethylene under fatigue at controlled stress intensity

V. Favier, C. G'sell, J. Hiver, 2002 .

The influence of the amorphous matrix on the plastic hardening at large strain of semicrystalline polymers

M. Philippe, C. G'sell, A. Dahoun, 1999 .

In situ study of matrix strain in carbon/resin composite materials

C. G'sell, P. Sigety, C. Briançon, 1996 .

Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends

S. Bai, C. G'sell, J. Hiver, 2004 .

Study on the microstructures and mechanical behaviour of compatibilized polypropylene/ polyamide-6 blends

Y. Mai, S. Bai, C. G'sell, 2002 .

Polypropylene/polyamide 6/polyethylene–octene elastomer blends. Part 2: volume dilatation during plastic deformation under uniaxial tension

S. Bai, C. G'sell, J. Hiver, 2004 .

Experimental characterization of the volume strain of poly(vinylidene fluoride) in the region of homogeneous plastic deformation

S. Elkoun, L. Cangémi, C. G'sell, 2002 .

Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking

C. G'sell, J. Hiver, A. Dahoun, 2002 .

Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene

C. G'sell, J. Hiver, F. Addiego, 2006 .

Characterization of volume strain of poly(vinylidene fluoride) under creep test

S. Elkoun, L. Cangémi, C. G'sell, 2002 .

In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope

Christian G'Sell, C. G'sell, M. Aboulfaraj, 1995 .

Plastic deformation of amorphous and semi-crystalline materials

C. G'sell, B. Escaig, 1982 .

Flow localization induced by a change in strain path in mild steel

E. F. Rauch, E. Rauch, C. G'sell, 1989 .

Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers

J. Jonas, C. G'sell, N. A. Aly-Helal, 1983 .

Oxidation and crosslinking processes during thermal aging of low-density polyethylene films

C. G'sell, S. Chabira, M. Sebaa, 2011 .

Influence of climatic ageing on the mechanical properties and the microstructure of low‐density polyethylene films

C. G'sell, M. Sebaa, S. Chabira, 2008 .

Scanning force microscopic investigation of plasticity and damage mechanisms in polypropylene spherulites under simple shear

G. Coulon, C. G'sell, G. Castelein, 1999 .

Polymers under mechanical stress: Deformation of the nanostructure of isotactic polypropylene revealed by scanning force microscopy

Christian G'Sell, G. Coulon, C. G'sell, 1997 .

Spherulitic morphology of isotactic polypropylene investigated by scanning electron microscopy

C. G'sell, A. Dahoun, M. Aboulfaraj, 1993 .

Plastic behavior and deformation textures of poly(etherether ketone) under uniaxial tension and simple shear

A. Molinari, G. Canova, C. G'sell, 1995 .

Evolution of microstructure in semi-crystalline polymers under large plastic deformation

C. G'sell, A. Dahoun, 1994 .

Use of a bis(aminoalkyl)‐calix[4]arene derivative as cross‐linking agent to enhance functional and mechanical properties of a maleated polypropylene

S. Hoppe, C. G'sell, J. Regnouf-de-Vains, 2021 .

Optimization of valsartan encapsulation in biodegradables polyesters using Box-Behnken design.

C. G'sell, F. Rezgui, Ounissa Sadoun, 2018, Materials science & engineering. C, Materials for biological applications.

Full factorial design optimization of anti-inflammatory drug release by PCL-PEG-PCL microspheres.

F. Dahmoune, C. G'sell, F. Rezgui, 2016, Materials science & engineering. C, Materials for biological applications.

Mechanical properties and volume dilatation of HDPE/CaCO3 blends with and without impact modifier

S. Bai, Yulin Yang, C. G'sell, 2006 .

Dynamic mechanical properties and morphology of high‐density polyethylene/CaCO3 blends with and without an impact modifier

S. Bai, Yulin Yang, C. G'sell, 2007 .

Evaluation of temporary restorations' microleakage by means of electrochemical impedance measurements.

B. Jacquot, C. G'sell, M. Panighi, 1996, Journal of endodontics.

Influence of calcium concentration on the dentin wettability by an adhesive.

C. G'sell, M. Panighi, 1992, Journal of biomedical materials research.

X-ray topographic examination of loops and spiral dislocations in cadmium single crystals

C. G'sell, G. Champier, 1976 .

Video-controlled tensile testing of polymers and metals beyond the necking point

A. Dahoun, C. G'sell, C. G'Sell, 1992 .

Effect of plastic deformation on the microstructure and properties of amorphous polycarbonate

J. Cavaillé, G. P. Johari, J. Pérez, 1989 .

Influence of physical ageing on the yield response of model DGEBA/poly(propylene oxide) epoxy glasses

G. McKenna, C. G'sell, 1992 .

Plastic deformation of low‐density polyethylene reinforced with biodegradable polylactide, Part 1: Microstructural analysis and tensile behavior at constant true strain‐rate

C. G'sell, J. Hiver, T. Sadoun, 2011 .

Microleakage of Cavit, CavitW, CavitG and IRM by impedance spectroscopy.

B. Jacquot, C. G'sell, M. Panighi, 1996, International endodontic journal.

Recommendations on modeling polyphase plasticity : conclusions of panel discussions

J. D. Embury, Hans-Rudolf Wenk, Christian G'Sell, 1994 .

Yield and transient effects during the plastic deformation of solid polymers

J. Jonas, C. G'sell, C. G'Sell, 1981 .

Preparation of cadmium, zinc and magnesium single crystals of high crystalline perfection☆

C. G'sell, G. Champier, Y. Iwasaki, 1974 .

X-ray Topographic Examination of the Generation, Glide and Locking of Basal Dislocations during the Microplastic Deformation of Zinc and Cadmium Crystals

C. G'sell, G. Champier, 1980 .

Constitutive viscoplastic behavior of amorphous PET during plane‐strain tensile stretching

C. G'sell, J. Hiver, M. Vigny, 1999 .

Influence of Crosslinking on the Plastic Behavior of Amorphous Polymers at Large Strains

C. G'sell, A. Souahi, 1997 .

Microscopic in situ observation of the plastic deformation of polybutene-1 films under simple shear

C. G'sell, S. Boni, J. Haudin, 1982 .

Observation by X-ray topography of the climb of dislocations during the oxidation of zinc single crystals

C. G'sell, G. Champier, 1975 .

Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures

I. Ward, D. Barton, J. Mohanraj, 2006 .

Effect of microstructure on crazing onset in polyethylene under tension

O. Godard, C. G'sell, J. Hiver, 2009 .

Deformation and damage upon stretching of degradable polymers (PLA and PCL)

Christian G'Sell, C. G'sell, J. Hiver, 2005 .

Experimental investigation of neck propagation in polymers

A. Márquez-Lucero, K. Neale, C. G'sell, 1989 .

Determination of the plastic behaviour of solid polymers at constant true strain rate

J. Jonas, C. G'sell, J. J. Jonas, 1979 .

Rheology of polypropylene in the solid state

A. Dahoun, C. G'sell, P. Duffo, 1995, Journal of Materials Science.

The effect of strain rate on the die-drawing of polyoxymethylene at elevated temperatures

I. Ward, D. Barton, J. Mohanraj, 2006 .

Plastic deformation and solid-phase transformation in polybutene-1

C. G'sell, J. Haudin, E. Weynant, 1982 .

Viscoelastic analysis of a polyurethane thermosetting resin under relaxation and at constant compression strain rate

Y. Leterrier, C. G'sell, 1988 .

Formation and elimination of voids during the processing of thermoplastic of matrix composites

Y. Leterrier, C. G'sell, 1994 .

Optimized tensile conditions for the in situ X-ray topographic observation of glide dislocations in single crystals

C. G'sell, G. Champier, 1981 .

Physical analysis of the state- and rate-dependent friction law: Static friction

T. Baumberger, C. G'sell, J. Hiver, 1999 .

Plastic Deformation of Glassy Polymers: Constitutive Equations and Macromolecular Mechanisms

C. G'sell, C. G'Sell, 1986 .

Plastic behaviour under simple shear of thermosetting resins for fibre composite matrices

J. Favre, C. G'sell, D. Jacques, 1990 .

Dislocations in glassy polymers do they exist? Are they useful?

C. G'sell, 2001 .

Observation and modelling of shear-band propagation in glassy polycarbonate

J. Grenet, C. G'sell, 1990 .

Low-frequency Raman spectroscopy of plastically deformed poly(methyl methacrylate)

A. Boukenter, S. Etienne, C. G'sell, 1995 .

Multilayer plug flow modeling of the fast stamping process for a polypropylene/glass fiber composite

Y. Leterrier, C. G'sell, 1996 .

Physical aging of epoxy networks after quenching and/or plastic cycling

D. Mangelinck, G. McKenna, C. G'sell, 1994 .

Influence of deformation defects on the development of strain gradients during the tensile deformation of polyethylene

J. Jonas, S. Semiatin, C. G'sell, 1992 .

Effect of a plastic deformation on the nanostructure of polycarbonate: study by low-frequency Raman scattering

S. Etienne, C. G'sell, E. Duval, 1996 .

The onset of flow localization in tensile samples containing geometric and metallurgical defects

J. Jonas, N. Christodoulou, C. G'sell, 1978 .

Analytical and numerical evaluation of the stress field during the neck formation in the cold drawing of thermoplastics

C. G'sell, A. Lucero, 2008 .

The Use of Torsion Testing to Assess Material Formability

John J. Jonas, G. R. Canova, J. Jonas, 1982 .

Some Observations of the lamellar Morphology in Isotactic Polypropylene Spherulites by SFM

G. Coulon, C. G'sell, G. Castelein, 1995 .

Finite element determination of the forces exerted by endotracheal tubes on the upper airways.

B Cochelin, B. Cochelin, M. Potier-Ferry, 1996, Biomaterials.

Microstructure Transformation and Stress-Strain Behavior of Isotactic Polypropylene Under Large

M. Philippe, G. Canova, C. G'sell, 1997 .