C. Oliphant

发表

The influence of thermal annealing on the morphology and structural properties of a conjugated polymer in blends with an organic acceptor material

S. E. Mavundla, D. E. Motaung, G. Malgas, 2009 .

Characterization of silicon nitride thin films deposited by hot-wire CVD at low gas flow rates

C. Arendse, D. Knoesen, C. Oliphant, 2013 .

Depth-dependent crystallinity of nano-crystalline silicon induced by step-wise variation of hydrogen dilution during hot-wire CVD

F. Cummings, D. E. Motaung, G. Malgas, 2015 .

Oxidation Reduction in Nanocrystalline Silicon Grown by Hydrogen-Profiling Technique

F. Cummings, C. Arendse, C. Oliphant, 2016 .

Mixed-halide perovskites solar cells through PbICl and PbCl2 precursor films by sequential chemical vapor deposition

C. Arendse, S. Guha, C. Oliphant, 2021, Solar Energy.

Air-Stable Hybrid Perovskite Solar Cell by Sequential Vapor Deposition in a Single Reactor

C. Arendse, S. Guha, C. Oliphant, 2020 .

Effect of HTL thickness on air processed CVD perovskite solar cells

F. Cummings, C. Arendse, C. Oliphant, 2020 .

Controlled Deposition of Lead Iodide and Lead Chloride Thin Films by Low-Pressure Chemical Vapor Deposition

C. Arendse, C. Oliphant, T. Muller, 2020 .

Evaluation of rr-P3HT solar cells with low amounts of SiNWs

C. Arendse, C. Oliphant, T. Muller, 2020 .

Chemical, electronic and nanostructural properties of nanocrystalline silicon synthesised by hot‐wire CVD

F. Cummings, W. Jordaan, C. Arendse, 2016 .

Investigation of isochronal annealing on the optical properties of HWCVD amorphous silicon nitride deposited at low temperatures and low gas flow rates

F. Cummings, G. Malgas, C. Arendse, 2015 .

Influence of the modification of annealing parameters on solution-processed metal oxide ETL buffer layers, and a comparative study of spin-coated and thermally evaporated MoOx HTL for use in an inverted polymer solar cell

F. Cummings, C. Arendse, C. Oliphant, 2020 .

XRD analysis and microstructure of milled and sintered V, W, C, and Co powders

D. E. Motaung, C. Oliphant, M. Phasha, 2011 .

EBSD Analysis of Tungsten-Filament Carburization During the Hot-Wire CVD of Multi-Walled Carbon Nanotubes

H. Swart, C. Arendse, C. Oliphant, 2014, Microscopy and Microanalysis.

Solid state dewetting of a metal –semiconductor bi-layers deposited onto c-Si substrate

F. Cummings, M. Masenya, C. Oliphant, 2023, Journal of Materials Science: Materials in Electronics.

Effect of additional electron acceptor in hybrid P3HT:PCBM:ZnO spin‐coated films for photovoltaic application

F. Cummings, D. E. Motaung, G. Malgas, 2016 .

Thermal-induced changes on the properties of spin-coated P3HT:C60 thin films for solar cell applications

S. E. Mavundla, D. E. Motaung, G. Malgas, 2009 .

Effect of ammonia on Ta filaments in the hot wire CVD process

R. Schropp, C.H.M. van der Werf, V. Verlaan, 2009 .

Raman analysis of bilayer graphene film prepared on commercial Cu(0.5 at% Ni) foil

N. Manyala, A. Bello, M. Madito, 2016 .

Filament poisoning at typical carbon nanotube deposition conditions by hot-filament CVD

D. E. Motaung, C. Arendse, D. Knoesen, 2009, Journal of Materials Science.

A dilute Cu(Ni) alloy for synthesis of large-area Bernal stacked bilayer graphene using atmospheric pressure chemical vapour deposition

N. Manyala, A. Bello, F. Barzegar, 2016 .

Determination of nitrogen content within silicon nitride thin films synthesised by hot-wire chemical vapour deposition

C. Arendse, C. Oliphant, T. Muller, 2013 .