A. R. Eivani

发表

Design of an expert system based on neuro-fuzzy inference analyzer for on-line microstructural characterization using magnetic NDT method

Mohammad Mazinani, Sadegh Ghanei, Ali Reza Eivani, 2015 .

Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the High-Temperature Flow Behavior of Sn-5Sb Solder Alloy: A Comparative Study for Processing Map Development

S. H. Seyedein, M. Aboutalebi, H. Vafaeenezhad, 2016, Journal of Electronic Materials.

Modelling and prediction impression creep behaviour of Al–Cu cast alloy

H. Vafaeenezhad, A. R. Eivani, M. Dehnavi, 2017 .

The effect of dead metal zone formation on strain and extrusion force during equal channel angular extrusion

A. Karimi Taheri, Ali Reza Eivani, A. Taheri, 2008 .

Effect of the Size Distribution of Nanoscale Dispersed Particles on the Zener Drag Pressure

Jie Zhou, J. Duszczyk, J. Zhou, 2011 .

The effect of accumulative roll bonding on the precipitation behavior of a single step artificially aged Al–Ag-Sc alloy

H. Jafarian, S. H. M. Anijdan, A. R. Eivani, 2021, Materials Science and Engineering: A.

Regulating of tensile properties through microstructure engineering in Fe-Ni-C TRIP steel processed by different strain routes of severe deformation

H. Jafarian, N. Park, A. R. Eivani, 2020 .

Effect of pure shear strain on mechanical properties and microstructural evolution

H. Jafarian, A. R. Eivani, F. Rahimi, 2017 .

Inhomogeneity in microstructure and mechanical properties during twist extrusion

H. Jafarian, M. Mirzaei, A. R. Eivani, 2016 .

Effect of die design parameters on the deformation behavior in pure shear extrusion

A. R. Eivani, F. Rahimi, M. Kiani, 2015 .

Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode

H. Jafarian, N. Park, S. H. M. Anijdan, 2021 .

Application of artificial neural networks to predict the grain size of nano-crystalline nickel coatings

Ali Reza Eivani, A. R. Eivani, A. M. Rashidi, 2009 .

Effects of reduced surface grain structure and improved particle distribution on pitting corrosion of AA6063 aluminum alloy

A. R. Eivani, M. Soltanieh, M. Mehdizade, 2020 .

Micromechanical simulation of plastic deformation behavior and failure commencement in high silicon bainitic steel after austempering

S. H. Seyedein, M. Aboutalebi, H. Vafaeenezhad, 2021 .

Investigation of joint interface and cracking mechanism of thick cladding of copper on aluminum by equal channel angular pressing (ECAP)

H. Jafarian, A. R. Eivani, H. R. Mirzakoochakshirazi, 2020 .

Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing

H. Jafarian, M. Torabi, A. R. Eivani, 2017 .

Re-strengthening in AA 6063 Alloy During Equal Channel Angular Pressing

H. Jafarian, M. Torabi, A. R. Eivani, 2017 .

Numerical Prediction of Ductile Fracture in Sn-5Sb Alloy Hot Deformation Based on Phenomenological Models and Finite Element Analysis

S. H. Seyedein, M. Aboutalebi, H. Vafaeenezhad, 2021, Journal of Materials Engineering and Performance.

Prediction of the thickness loss of nanocrystalline nickel at elevated temperatures

A. R. Eivani, A. Rashidi, F. Mozafari, 2013 .

Modeling the electrical resistivity of Zn–Mn–S nanocrystalline semiconductors

A. R. Eivani, P. Jajarmi, A. Eivani, 2009 .

Using high temperature tensile testing data to analyze hot formability of Sn-5Sb alloy: instability and critical damage criteria

S. H. Seyedein, M. Aboutalebi, H. Vafaeenezhad, 2020 .

Experimental and analytical studies on the prediction of forming limit diagrams

A. Akbarzadeh, S. Ahmadi, A. R. Eivani, 2009 .

Application of physical and numerical simulations for interpretation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy

Jie Zhou, A. R. Eivani, A. Eivani, 2017 .

The effect of amount of pre-strain using equal channel angular pressing on softening response of AA5052 alloy

H. Jafarian, N. Park, H. Arabi, 2020 .

Microstructural development and its effects on tensile properties of a high Ni TRIP steel produced by repetitive corrugation and straightening via rolling (RCSR)

H. Jafarian, N. Park, H. Arabi, 2020 .

Effects of hot forming cold die quenching and inter-pass solution treatment on the evolution of microstructure and mechanical properties of AA2024 aluminum alloy after equal channel angular pressing

H. Jafarian, N. Park, A. R. Eivani, 2020 .

Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy

H. Jafarian, A. R. Eivani, M. Hasheminiasari, 2019, Journal of Alloys and Compounds.

Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063

H. Jafarian, S. Boutorabi, A. Yousefi, 2018 .

Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy

H. Jafarian, H. Arabi, A. R. Eivani, 2018, Materials Science and Engineering: A.

Flow behavior and strain rate sensitivity assessment of γ and γʹ phases in Co–Al–W-based superalloy using experimental and computational approaches

S. H. Seyedein, H. Vafaeenezhad, A. R. Eivani, 2022, Journal of Materials Research and Technology.

Characterization of the anodic oxide layer deposited on severely deformed and aged AA6063 aluminum alloy

A. R. Eivani, M. Soltanieh, M. Mehdizade, 2021 .

Investigation of anodizing time and pulse voltage modes on the corrosion behavior of nanostructured anodic layer in commercial pure aluminum

A. R. Eivani, M. Soltanieh, M. Mehdizade, 2019, Surface and Coatings Technology.

Investigation of Mechanical Properties and Antibacterial Behavior of We43 Magnesium-Based Nanocomposite

S. Boutorabi, S. Masoudpanah, A. R. Eivani, 2022, SSRN Electronic Journal.

An investigation of workability and flow instability of Sn-5Sb lead free solder alloy during hot deformation

S. H. Seyedein, M. Aboutalebi, H. Vafaeenezhad, 2018 .

Modified Monte Carlo approach for simulation of grain growth and Ostwald ripening in two-phase Zn–22Al alloy

S. H. Seyedein, H. Mohammadi, A. R. Eivani, 2020 .

An experimental and theoretical investigation of the effect of second-phase particles on grain growth during the annealing of hot-rolled AZ61 magnesium alloy

H. Jafarian, M. Mohseni, J. Zhou, 2021, Journal of Materials Research and Technology.

Simulation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy

H. Jafarian, J. Zhou, A. R. Eivani, 2020 .

Grains versus subgrains: How growth kinetics is affected by the presence of nanosized dispersoids

A. R. Eivani, A. H. Omranpoor, A. Eivani, 2016 .

Simulation of transient-state recrystallization of Al–4.5Mg–1Zn alloy after hot deformation

Jie Zhou, J. Duszczyk, A. R. Eivani, 2014 .

A new approach to incorporating the effect of nano-sized dispersoids on recrystallization inhibition into Monte Carlo simulation

Jie Zhou, J. Duszczyk, A. R. Eivani, 2012 .

An Investigation of Microstructural Background for Improved Corrosion Resistance of We43 Magnesium-Based Composites with Zno and Cu/Zno Additions

S. Boutorabi, S. Masoudpanah, A. R. Eivani, 2022, SSRN Electronic Journal.

The effects of cold rolling and aging conditions on the microstructure and magnetic properties of a semi-hard Fe–Mo–Ni magnetic alloy

H. Jafarian, A. R. Eivani, H. Koohdar, 2021 .