N. Nguyen

发表

Determination of Anisotropic Yield Coefficients by a Data-Driven Multiobjective Evolutionary and Genetic Algorithm

F. Barlat, N. Chakraborti, K. Hariharan, 2015 .

Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation

Jae Hyun Kim, H. Kim, Myoung-Gyu Lee, 2013 .

AN EFFICIENT HOMOGENIZATION METHOD USING THE TRIGONOMETRIC INTERPOLATION AND THE FAST FOURIER TRANSFORM

C. Licht, J. Kweon, N. Nguyen, 2012 .

Design Analysis of a 3–3 Mode Piezocomposite Actuator

J. Kweon, N. Nguyen, Kwang-Joon Yoonb, 2011 .

Mechanical Behavior of AZ31B Mg Alloy Sheets under Monotonic and Cyclic Loadings at Room and Moderately Elevated Temperatures

Ji-hoon Kim, H. Kim, Chung-An Lee, 2014, Materials.

Failure prediction of AZ31B magnesium alloy sheet based on a micro-mechanical void model incorporating the asymmetric plasticity constitutive law

H. Kim, Dae-Young Kim, Chung-An Lee, 2017 .

A Modified McClintock Criterion Considering the Third Stress Invariant

H. Kim, Dae-Young Kim, N. Nguyen, 2011 .

Application of Failure Criteria in Aluminum Sheet Forming Analysis

H. Kim, Dae-Young Kim, N. Nguyen, 2011 .

Cyclic behavior of AZ31B Mg: Experiments and non-isothermal forming simulations

Ji Hoon Kim, H. Kim, Chung-An Lee, 2015 .

Orientation-Dependent Response of Pure Zinc Grains Under Instrumented Indentation: Micromechanical Modeling

B. Abbès, F. Abbès, N. Nguyen, 2017 .

A practical constitutive model for AZ31B Mg alloy sheets with unusual stress-strain response

Ngoc-Trung Nguyen, Heon Young Kim, Ji Hoon Kim, 2013 .

An experimental study to improve the performance of unimorph piezoelectric actuators subjected to external loading

Ngoc-Trung Nguyen, Kwang Joon Yoon, Bum-Soo Yoon, 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

A Study on the Actuating Performance of Unimorph Piezoelectric Actuators with a Center Load

Kwang Joon Yoon, Ngoc Trung Nguyen, K. Yoon, 2006 .

Development of Elevator Control Surface for Small Air Robot Using Piezoceramic Actuator

Hoon Cheol Park, Ngoc-Trung Nguyen, Hery Setiawan, 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

Analytical model for actuation displacement prediction of unimorph piezoelectric composite actuators

Ngoc-Trung Nguyen, Kwang Joon Yoon, K. Yoon, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Analytical model and optimal design of a d33-mode active layer for the lightweight unimorph piezo-composite actuator

K. Yoon, N. Nguyen, B. Yoon, 2011 .

Actuation characterization of the lightweight unimorph piezo-composite actuator for different loading cases

K. Yoon, N. Nguyen, B. Yoon, 2013 .

An improved design of Piezo-Composite Actuator used as the artificial muscle for bio-inspired robots

Ngoc-Trung Nguyen, Kwang-Joon Yoon, Bum-Soo Yoon, 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

End-to-end multiple modals deep learning system for hand posture recognition

N. Nguyen, H. Doan, 2022, Indonesian Journal of Electrical Engineering and Computer Science.

A pragmatic approach to accommodate in-plane anisotropy in forming limit diagrams

Ji Hoon Kim, F. Barlat, Myoung-Gyu Lee, 2014 .

Actuation Displacement of Unimorph Piezoelectric Actuators with External Loading

Hoon Cheol Park, Ngoc-Trung Nguyen, Kwang Joon Yoon, 2007 .

Assessment of the failure load for an AA6061-T6 friction stir spot welding joint

H. Y. Kim, N. Nguyen, D. Kim, 2011 .

Numerical prediction of various failure modes in spotwelded metals

N. T. Nguyen, Dae-Young Kim, J. H. Song, 2012 .

Hydroformability assessment of AA6063 tubes using the polar effective plastic strain diagram

H. Kim, Myoung-Gyu Lee, H. J. Kim, 2015 .

Flutter and Buffeting Control of Long-span Suspension Bridge by Passive Flaps: Experiment and Numerical Simulation

Duc-Huynh Phan, Ngoc-Trung Nguyen, N. Nguyen, 2013 .

Characterization of composite material properties using eigenstrain method

C. Licht, J. Kweon, Jinho Choi, 2012 .

Application of finite element code to characterize mechanical properties of complex microstructured materials

N. Nguyen, S. Kang, D. Kim, 2011 .

Springback Reduction in Tailor Welded Blank with High Strength Differential by Using Multi‐Objective Evolutionary and Genetic Algorithms

Nirupam Chakraborti, Frédéric Barlat, Ngoc-Trung Nguyen, 2015 .

Multi‐Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels

Frédéric Barlat, Ngoc-Trung Nguyen, Nirupam Chakraborti, 2014 .

A continuous damage fracture model to predict formability of sheet metal

N. Nguyen, N‐T. Nguyen, D‐Y. Kim, 2013 .

Design of high strength differential TWB to enhance drawability: FE study and optimization

F. Barlat, Myoung-Gyu Lee, K. Hariharan, 2014 .

Design of high strength differential TWB to enhance drawability: FE study and optimization

F. Barlat, Myoung-Gyu Lee, K. Hariharan, 2014, International Journal of Precision Engineering and Manufacturing.