H. Badreddine

发表

On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming

Abdelwaheb Dogui, Khemais Saanouni, Houssem Badreddine, 2010 .

Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental–numerical methodology with various triaxialities

K. Saanouni, A. Tekkaya, C. Soyarslan, 2015 .

Experimental and numerical thermal analysis of open-cell metal foams developed through a topological optimization and 3D printing process

A. Merabtine, J. Gardan, H. Badreddine, 2018, The European Physical Journal Applied Physics.

On the full coupling of plastic anisotropy and anisotropic ductile damage under finite strains

K. Saanouni, H. Badreddine, 2017 .

Micromorphic constitutive equations with damage applied to metal forming

K. Saanouni, P. Hu, H. Badreddine, 2017 .

Modeling of the induced plastic anisotropy fully coupled with ductile damage under finite strains

K. Saanouni, Z. Yue, H. Badreddine, 2017 .

Ductile damage prediction in sheet and bulk metal forming

K. Saanouni, H. Badreddine, C. Labergere, 2016 .

Springback prediction of AL6061 pipe in free bending process based on finite element and analytic methods

Jun Gao, Z. Yue, H. Badreddine, 2020, The International Journal of Advanced Manufacturing Technology.

Thermomechanical model for solidification and cooling simulation of Ni-based superalloy components

D. Grange, H. Badreddine, C. Labergere, 2020 .

Inverse Identification of CDM Model Parameters for DP1000 Steel Sheets Using a Hybrid Experimental-Numerical Methodology Spanning Various Stress Triaxiality Ratios

K. Saanouni, A. Tekkaya, C. Soyarslan, 2013 .

An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials

K. Saanouni, H. Badreddine, C. Labergere, 2020 .

Ductile Damage in Metal Forming: Advanced Macroscopic Modeling and Numerical Simulation

K. Saanouni, H. Badreddine, M. Hamed, 2014 .

Springback Prediction of Aluminum Alloy Sheet under Changing Loading Paths with Consideration of the Influence of Kinematic Hardening and Ductile Damage

J. Gao, X. Chu, Z. Yue, 2018, Metals.

Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets

K. Saanouni, Guillaume Robin, H. Badreddine, 2015 .

Thermodynamically-consistent constitutive modeling of hardening asymmetry including isotropic ductile damage for Mg alloys

K. Saanouni, Kai Zhang, H. Badreddine, 2019, European Journal of Mechanics - A/Solids.

Solid 3D vs Plane Stress Shell Formulations of Anisotropic Non Normal Plasticity with Damage for Sheet Metal Forming

K. Saanouni, H. Badreddine, 2013 .

Damage Prediction in Sheet Metal Forming

K. Saanouni, H. Badreddine, 2007 .

Numerical Analysis of Kinematic Hardening Effect in Cyclic Loading of Aluminum Alloy 2024

N. Hfaiedh, H. Badreddine, A. Znaidi, 2021, Advances in Mechanical Engineering and Mechanics II.

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

K. Saanouni, Kai Zhang, Jianlin Liu, 2020 .

Failure prediction on steel sheet under different loading paths based on fully coupled ductile damage model

K. Saanouni, K. Cao, J. Gao, 2019, International Journal of Mechanical Sciences.

Experimental and numerical studies of AL7020 formability under orthogonal loading paths with considering yield surface distortion

E. S. Perdahcıoğlu, K. Saanouni, Z. Yue, 2017 .

Formability prediction of AL7020 with experimental and numerical failure criteria

K. Saanouni, A. Tekkaya, Z. Yue, 2015 .

Broad stress triaxiality ratio band fracture experiments in DP900 metal sheets and corresponding predictive capability of advanced phenomenological and micromechanical fully coupled damage models

K. Saanouni, J. Gao, X. Zhuang, 2021 .

Comparison of two uncoupled ductile damage initiation models applied to DP900 steel sheet under various loading paths

J. Gao, X. Zhuang, Z. Yue, 2020 .

A fully coupled damage model with stress triaxiality and Lode dependence

K. Saanouni, N. Hfaiedh, H. Badreddine, 2020, IOP Conference Series: Materials Science and Engineering.

A new experimental and simulation methodology for prediction of recrystallization in Ni-based single crystal superalloys during investment casting

D. Grange, H. Badreddine, C. Labergere, 2022, Journal of Materials Processing Technology.

Metal Forming Simulation Based on Advanced Mechanical Model Strongly Coupled with Ductile Damage

K. Saanouni, Z. Yue, H. Badreddine, 2019, Encyclopedia of Continuum Mechanics.

An advanced elastoplastic framework accounting for induced plastic anisotropy fully coupled with ductile damage

K. Saanouni, M. B. Bettaieb, F. Abed-Meraim, 2021 .

An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials

H. Badreddine, C. Labergere, K. Saanouni, 2020, International Journal of Material Forming.

Numerical simulation of sheet metal blanking based on fully coupled elastoplasticity-damage constitutive equations accounting for yield surface distortion-induced anisotropy

K. Saanouni, J. Gao, X. Zhuang, 2017 .

On the distortion of yield surface under complex loading paths in sheet metal forming

A. H. van den Boogaard, A. E. Tekkaya, Khemais Saanouni, 2014 .

A New Model Describing Plastic Distortion Fully Coupled with Ductile Damage

K. Saanouni, Z. Yue, H. Badreddine, 2014 .

Enhancement of mechanical properties of high modulus polypropylene grade for multilayer sewage pipes applications

G. Challita, G. Montay, W. Yared, 2022, Journal of Applied Polymer Science.

Effect of the kinematic hardening on the plastic anisotropy parameters for metallic sheets

K. Saanouni, J. Duval, H. Badreddine, 2018, Comptes Rendus Mécanique.

Failure prediction of magnesium alloys based on improved CDM model

K. Saanouni, Kai Zhang, Jianlin Liu, 2021 .

Thermomechanical modeling of distortional hardening fully coupled with ductile damage under non-proportional loading paths

K. Saanouni, Kai Zhang, H. Badreddine, 2018, International Journal of Solids and Structures.

Damage anisotropy and its effect on the plastic anisotropy evolution under finite strains

K. Saanouni, H. Badreddine, Trong Dung Nguyen, 2015 .

Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature

K. Saanouni, S. Forest, P. Hu, 2016 .

An elasto-plastic self-consistent model for damaged polycrystalline materials: Theoretical formulation and numerical implementation

K. Saanouni, M. B. Bettaieb, F. Abed-Meraim, 2020, Computer Methods in Applied Mechanics and Engineering.

Investigation and comparison of three noval strain rate-dependent fracture criteria

J. Gao, Z. Yue, H. Badreddine, 2021, Materials Science and Technology.

Ductile fracture prediction using enhanced CDM model with Lode angle-dependency for titanium alloy Ti-6Al-4V at room temperature

K. Saanouni, Kai Zhang, H. Badreddine, 2020 .

Advanced Anisotropic Damage Model Fully Coupled with Anisotropic Plasticity

K. Saanouni, H. Badreddine, 2015 .

Modelling of ductile damage in single point incremental forming process using enhanced CDM model

Z. Yue, H. Badreddine, K. Zhang, 2022, IOP Conference Series: Materials Science and Engineering.

Effect of Anisotropic Plastic Flow on the Ductile Damage Evolution in Hydrobulging Test of Thin Sheet Metal

Mohamed Amen Gahbiche, A. Dogui, H. Badreddine, 2005 .

F.E. elastoplastic damage model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation

A. Rassineux, H. Badreddine, C. Labergere, 2008 .

Advances in Virtual Metal Forming Including the Ductile Damage Occurrence: Application to 3D Sheet Metal Deep Drawing

Khemais Saanouni, Houssem Badreddine, K. Saanouni, 2008 .

Solid 3 D vs Plane Stress Shell Formulations of Anisotropic Non Normal Plasticity with Damage for Sheet Metal Forming

K. Saanouni, H. Badreddine, 2009 .

Advanced numerical simulation based on a non-local micromorphic model for metal forming processes

K. Saanouni, H. Badreddine, Evangelia Diamantopoulou, 2016 .

Interaction between ductile damage and texture evolution in finite polycrystalline elastoplasticity

K. Saanouni, A. Roos, H. Badreddine, 2019 .