Zhongguo Zhao

发表

The morphological evolution and β-crystal distribution of isotactic polypropylene with the assistance of a long chain branched structure at micro-injection molding condition

Qi Yang, Hongwen Sun, Zhongguo Zhao, 2017, Journal of Polymer Research.

Effects of Filling Pressure on Natural Gas Permeability of CNG Type IV Gas Cylinder

Zhongguo Zhao, Song Huang, Shutao Xiong, 2021, AIAM.

Favorable formation of stereocomplex crystals in long-chain branched poly(L-lactic acid)/poly(D-lactic acid) blends: impacts of melt effect and molecular chain structure

T. Ai, Dahang Tang, Zhongguo Zhao, 2021, Journal of Materials Science.

Thermal oxidative and ozone oxidative stabilization effect of hybridized functional graphene oxide in a silica-filled solution styrene butadiene elastomer.

Yajiang Huang, X. Liao, Qi Yang, 2016, Physical chemistry chemical physics : PCCP.

Effects of Process Temperatures on the Flow-Induced Crystallization of Isotactic Polypropylene/Poly(ethylene terephthalate) Blends in Microinjection Molding

Yajiang Huang, X. Liao, Qi Yang, 2017 .

Effective in situ polyamide 6 microfibrils in isotactic polypropylene under microinjection molding: significant improvement of mechanical performance

Yajiang Huang, X. Liao, Qi Yang, 2016, Journal of Materials Science.

New understanding of the hierarchical distribution of isotactic polypropylene blends formed by microinjection-molded poly(ethylene terephthalate) and β-nucleating agent

Yajiang Huang, X. Liao, Qi Yang, 2015 .

Discussions on the 3D models of the images of stripy flaw by X-ray examination

Zhongguo Zhao, Song Huang, Jie Chen, 2022, 2022 IEEE Asia-Pacific Conference on Image Processing, Electronics and Computers (IPEC).

Crystallization and Microstructure Evolution of Microinjection Molded Isotactic Polypropylene with the Assistance of Poly(Ethylene Terephthalate)

T. Ai, Qi Yang, Zhongguo Zhao, 2020, Polymers.

Effect of in situ poly(ethylene terephthalate) (PET) microfibrils on the morphological structure and crystallization behavior of isotactic polypropylene (iPP) under an intensive shear rate

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Realizing simultaneous toughening and reinforcement in polypropylene blends via solid die-drawing

Yajiang Huang, X. Liao, Qi Yang, 2019, Polymer.

Interface regulation effects on mechanical behavior of heterostructure Ti6Al4V/TiAl-based laminated composite sheets

Tao Wang, Gang Liu, T. Ai, 2022, Ceramics International.

Evaluating the performance of bridging-assembly chelating flocculant for heavy metals removal: Role of branched architectures.

Hongbing Luo, L. Fan, Wei Chen, 2021, Chemosphere.

Preparation of alumina-coated graphite for thermally conductive and electrically insulating epoxy composites

Y. Liu, Yajiang Huang, Dahang Tang, 2015 .

Preparation and properties of epoxy/BN highly thermal conductive composites reinforced with SiC whisker

Yajiang Huang, Dahang Tang, X. Liao, 2016 .

A low seepage threshold and super‐toughness of polybutylene succinate‐based composites with double percolation structure: Synergy of multi‐wall carbon nanotubes and polyvinyl butyral

Zhongguo Zhao, Shikui Jia, Yan Zhu, 2022, Polymers for Advanced Technologies.

Unusual hierarchical structures of micro-injection molded isotactic polypropylene in presence of an in situ microfibrillar network and a β-nucleating agent

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Discussion of the Corrosion Mechanism of Drum in a Boiler

Zhongguo Zhao, Song Huang, Shutao Xiong, 2020, IOP Conference Series: Earth and Environmental Science.

Structure evolution and orientation mechanism of isotactic polypropylene during the two‐stage solid die drawing process

Yajiang Huang, X. Liao, Qi Yang, 2018 .

Polypropylene Composites with Ultrahigh Low-Temperature Toughness by Tuning the Phase Morphology

W. Xia, Yanhui Chen, Dahang Tang, 2022, Industrial & Engineering Chemistry Research.

High-Temperature Response Polylactic Acid Composites by Tuning Double-Percolated Structures

Yapeng Li, Zhongguo Zhao, R. Xue, 2022, Polymers.

Fabrication of highly electrically conductive polypropylene/polyolefin elastomer/multiwalled carbon nanotubes composites via constructing ordered conductive network assisted by die‐drawing process

T. Ai, Dahang Tang, Yapeng Li, 2022, Journal of Applied Polymer Science.

Strain‐sensing behavior of flexible polypropylene/poly(ethylene‐co‐octene)/multiwalled carbon nanotube nanocomposites under cyclic tensile deformation

T. Ai, Dahang Tang, Yapeng Li, 2021, Polymer Composites.

Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching

B. Whiteside, A. Kelly, Yajiang Huang, 2018, Industrial & Engineering Chemistry Research.

Effects of Three Different Injection-Molding Methods on the Mechanical Properties and Electrical Conductivity of Carbon Nanotube/Polyethylene/Polyamide 6 Nanocomposite

Dashan Mi, Zhongguo Zhao, Wenli Zhu, 2019, Polymers.

Role of dicumyl peroxide on the morphology and mechanical performance of polypropylene random copolymer in microinjection molding

Yajiang Huang, X. Liao, Qi Yang, 2018 .

Flow-induced β-crystal of iPP in microinjection molding: effects of addition of UHMWPE and the processing parameters

Yajiang Huang, X. Liao, Qi Yang, 2016, Journal of Polymer Research.

Effect of dispersion and orientation of dispersed phase on mechanical and electrical conductivity

Dashan Mi, Zhongguo Zhao, Xiaoyue Li, 2021 .

Morphology evolution and crystalline structure of controlled‐rheology polypropylene in micro‐injection molding

X. Liao, Miqiu Kong, Zhongguo Zhao, 2016 .

Distinct strategy for the improvement of conductivity and electromagnetic shielding properties of MWCNTs / PLA / PBS composites: Synergistic effects of double percolation structure and UV aging

W. Liu, Phil Coates, Zhongguo Zhao, 2023, Polymer Composites.

Microstructure and orientation evolution of microinjection molded β‐nucleated isotactic polypropylene/poly(ethylene terephthalate) blends

A. Hrymak, M. Kamal, T. Ai, 2020 .

Photocatalytic performance of Fe doped TiO2 on the surface of carbon fiber

Hui Zhang, T. Ai, Yapeng Li, 2022, Optical Materials.

New insight into the flocculation behavior of hydrophilic silica in styrene butadiene rubber composites

Yajiang Huang, Dahang Tang, X. Liao, 2015 .

Dynamic Change and Evaluation of Poor Households in Qinba Mountain Area During the Process of Poverty Alleviation from the Perspective of Sustainable Livelihood—Based on the Empirical Study of 21 Villages in 6 Districts of Qinba Mountain Area

Zhongguo Zhao, Jiahao Zhu, Yuming Liu, 2019 .

Improved Yield and Electrical Properties of Poly(Lactic Acid)/Carbon Nanotube Composites by Shear and Anneal

Dashan Mi, Zhongguo Zhao, Haiqing Bai, 2023, Materials.

Effect of nanoparticles on the morphology and properties of PET/PP in situ microfibrillar reinforced composites

Y. Liu, Yajiang Huang, Dahang Tang, 2017 .