Minho Lee

发表

Improved modified energy ratio method using a multi-window approach for accurate arrival picking

Jihun Choi, Joongmoo Byun, Dowan Kim, 2017 .

Stability analysis of a whirling rigid rotor supported by stationary grooved FDBs considering the five degrees of freedom of a general rotor-bearing system

G. Jang, Jihoon Lee, Minho Lee, 2015 .

Analysis on the interactions of harmonics in exhaust pipes of automotive engines

Minho Lee, K. Cha, Joon-Seo Lee, 2003 .

Robust shaft design to compensate deformation in the hub press-fitting and disk clamping process of 2.5″ HDDs

Gunhee Jang, Bumcho Kim, Minho Lee, 2016 .

Monte Carlo simulation of the manufacturing tolerance in FDBs to identify the sensitive design variables affecting the performance of a disk-spindle system

Gunhee Jang, Jihoon Lee, C. Kang, 2014, Microsystem Technologies.

Optimal design and experimental verification of fluid dynamic bearings with high load capacity applied to an integrated motor propulsor in unmanned underwater vehicles

Sangmin Lee, Minho Lee, Gunhee Jang, 2017 .

Optimal design and experimental veri fi cation of fl uid dynamic bearings with high load capacity applied to an integrated motor propulsor in unmanned underwater vehicles

G. Jang, Sang-moon Lee, Minho Lee, 2017 .

Finite-element coupled analyses of the Reynolds and Hagen–Poiseuille equations to calculate pressure and flow of fluid dynamic bearings with a recirculation channel

G. Jang, Kyung-Tae Jung, C. Kang, 2018, Tribology International.

Stability analysis of a whirling rigid rotor supported by stationary grooved FDBs considering the five degrees of freedom of a general rotor-bearing system

Gunhee Jang, Jihoon Lee, Minho Lee, 2015, Microsystem Technologies.

Dynamic behavior of air–oil interface in fluid dynamic bearings with a double sealing structure in a 2.5′′ hard disk drive due to non-operating axial shock

Minho Lee, Bumcho Kim, Yeonha Jung, 2016 .