J. Leon

发表

Isothermal Upset Forging of AA5083 after Severe Plastic Deformation by ECAE

J. P. Fuertes, I. Puertas, C. Luis-Pérez, 2013 .

A Decision-Making Framework for Investment Diversification Using the Analytic Hierarchy Process

V. Jayakumar, J. Leon, C. Mariappan, 2014 .

Development of Nanostructured Armco-Fe by Equal Channel Angular Extrusion (ECAE)

I. Puertas, C. Luis, R. Luri, 2012 .

Evolution of damage in AA-5083 processed by equal channel angular extrusion using different die geometries

J. P. Fuertes, C. L. Pérez, R. Luri, 2011 .

FEM Modelling of the Continuous Combined Drawing and Rolling Process for Severe Plastic Deformation of Metallic Materials

C. Luis, R. Luri, D. Salcedo, 2014 .

Comparison between finite element method and analytical methods for studying wire drawing processes

Javier León, Rodrigo Luri, C. J. Luis, 2005 .

Mechanical Properties Analysis of an Al-Mg Alloy Connecting Rod with Submicrometric Structure

Javier León, Rodrigo Luri, C. J. Luis, 2015 .

FEM Modelling and Experimental Analysis of an AA5083 Turbine Blade from ECAP Processed Material

J. P. Fuertes, I. Puertas, R. Luri, 2014 .

A New Configuration for Equal Channel Angular Extrusion Dies

Javier León, Rodrigo Luri, C. J. Luis, 2006 .

Design and mechanical property analysis of AA1050 turbine blades manufactured by equal channel angular extrusion and isothermal forging

J. P. Fuertes, C. L. Pérez, R. Luri, 2013 .

Development of Nano-Structured AA1050 by ECAE and Thermal Treatments

I. Puertas, C. Luis, R. Luri, 2011 .

Simulation and analysis of isothermal forging of AA6063 obtained from material processed by equal channel angular pressing severe plastic deformation

Javier León, Rodrigo Luri, C. J. Luis, 2015 .

Grain Refinement of Pure Copper by ECAP

J. Cabrera, I. Puertas, N. Llorca-Isern, 2008 .

Effect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin

V. Jayakumar, J. Leon, 2020 .

Analysis of the Influence of Geometrical Parameters on the Mechanical Properties of Incremental Sheet Forming Parts

Javier León, Rodrigo Luri, C. J. Luis, 2013 .

Design, optimization, and mechanical property analysis of a submicrometric aluminium alloy connecting rod

J. P. Fuertes, I. Puertas, C. Luis, 2015 .

Analysis of Fatigue and Wear Behaviour in Ultrafine Grained Connecting Rods

J. P. Fuertes, I. Puertas, C. Luis, 2017 .

Analysis on the Manufacturing of an AA5083 Straight Blade Previously ECAE Processed

Javier León, Rodrigo Luri, C. J. Luis, 2013 .

Investigation of Mechanical Properties of Aluminium 6061 Alloy Friction Stir Welding

J. Leon, 2014 .

Manufacturing of Nanostructured Blades for a Francis Turbine by Isothermal Forging of AA6063

Javier León, Rodrigo Luri, C. J. Luis, 2014 .

A Method for Obtaining Spur Gears from Nanostructured Materials

I. Puertas, C. Luis-Pérez, R. Luri, 2012 .

Mechanical Properties Analysis of an Al-Mg Alloy Connecting Rod with Submicrometric Structure☆

J. P. Fuertes, C. Luis, R. Luri, 2015 .

Manufacturing of nanostructured rings from previously ECAE-processed AA5083 alloy by isothermal forging

Rodrigo Luri, C. J. Luis, I. Puertas, 2013 .

Designing an Algorithm for Bioloid Humanoid Navigating in its Indoor Environment

J. Stephen Leon, V. Jayakumar, V. Jayakumar, 2012 .

Some Investigations on Thermal Analysis of Aluminium Alloys in Friction Stir Welding

V. Jayakumar, J. Leon, 2015 .

Design, simulation and manufacturing of a connecting rod from ultra-fine grained material and isothermal forging

Rodrigo Luri, C. J. Luis, J. P. Fuertes, 2016 .

ANALYSIS OF RESIDUAL STRESSES IN WIRE DRAWING PROCESSES

C. Luis, R. Luri, D. Salcedo, 2010 .

EFFECT OF THE DIE GEOMETRY ON THE IMPARTED DAMAGE IN WIRE DRAWING

R. Luri, D. Salcedo, J. Leon, 2010 .

Experimental modelling of critical damage obtained in Al–Mg and Al–Mn alloys for both annealed state and previously deformed by ECAP

J. P. Fuertes, C. Luis, R. Luri, 2016 .

FEM Analysis of the Isothermal Forging of a Connecting Rod from Material Previously Deformed by ECAE

J. P. Fuertes, C. Luis, R. Luri, 2013 .

FEM analysis of spur gears forging from nano-structured materials

C. Luis-Pérez, R. Luri, D. Salcedo, 2012 .

Comparison between FEM and Experimental Results in the Upsetting of Nano-Structured Materials

I. Puertas, C. Luis-Pérez, J. Leon, 2012 .

Design and Optimization of the Dies for the Isothermal Forging of a Cam

I. Puertas, J. P. Fuertes, D. Salcedo, 2015 .

Comparative Study of the Damage Attained with Different Specimens by FEM

Javier León, Rodrigo Luri, C. J. Luis, 2015 .

Precision Study of a Coordinate Measuring Machine Using Several Contact Probes

Javier León, Rodrigo Luri, D. Salcedo, 2013 .

A Proposal of a Constitutive Description for Aluminium Alloys in Both Cold and Hot Working

J. P. Fuertes, I. Puertas, C. Luis, 2016 .

Design and mechanical properties analysis of AA5083 ultrafine grained cams

J. P. Fuertes, I. Puertas, C. Luis, 2017 .

Experimental and FEM Analysis of the AA 6082 Processed by Equal Channel Angular Extrusion

J. P. Fuertes, I. Puertas, C. Luis-Pérez, 2011 .