P. Bills

发表

Component size mismatch of metal on metal hip arthroplasty: an avoidable never event.

A. Hart, J. Skinner, R. Whittaker, 2014, The Journal of arthroplasty.

Comparison of different additive manufacturing methods using computed tomography

Paul J. Bills, Radu Racasan, Paras Shah, 2016 .

Methods to assess material loss of the modular taper interface in retrieved hip replacements

Liam Blunt, Paul J. Bills, Radu Racasan, 2014 .

Parametrically designed surface topography on CAD models of additively manufactured lattice structures for improved design validation

L. Blunt, A. Townsend, L. Pagani, 2021 .

Changes in the morphology of microgrooved stem tapers with differing assembly conditions

P. Bills, R. Racasan, J. Williamson, 2019, Biotribology.

Behavior of In Situ Cross‐Linked Hydrogels with Rapid Gelation Kinetics on Contact with Physiological Fluids

Alan M. Smith, V. Kontogiorgos, G. Morris, 2018 .

Material loss at the taper junction of retrieved large head metal‐on‐metal total hip replacements

L. Blunt, G. Blunn, J. Skinner, 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Understanding Why Dual-Taper Hips Fail

Gordon W. Blunn, Johann Henckel, Paul J. Bills, 2016 .

Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts

Liam Blunt, Richard K. Leach, Nicola Senin, 2017 .

The influence of hydroalcoholic media on the performance of Grewia polysaccharide in sustained release tablets.

M. H. Mahdi, B. Conway, P. Bills, 2017, International journal of pharmaceutics.

Accurate determination of material loss at the taper interface of retrieved metal-on-metal hip replacements

L. Blunt, A. Hart, J. Skinner, 2013 .

The Impact of Alkaliphilic Biofilm Formation on the Release and Retention of Carbon Isotopes from Nuclear Reactor Graphite

P. Heard, S. Boxall, B. Jackson, 2018, Scientific Reports.

Damage Patterns at the Head-Stem Taper Junction Helps Understand the Mechanisms of Material Loss.

A. Hart, J. Skinner, R. Whittaker, 2017, The Journal of arthroplasty.

Comparison and appraisal of techniques for the determination of material loss from tapered orthopaedic surfaces

P. Bills, K. Addinall, K. Dransfield, 2021 .

Effect of machining parameters on surface roughness in Al 2618 alloy subject to multi-axis machining process using ball nose cutting tools

S. Barrans, P. Bills, Md Shams E Tabriz, 2017, 2017 8th International Conference on Mechanical and Aerospace Engineering (ICMAE).

Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty

Liam Blunt, Xiang Jiang, Paul J. Bills, 2012 .

Characterisation of wear areas on UHMWPE total knee replacement prostheses through study of their areal surface topographical parameters

L. Fleming, A. Hart, H. Hothi, 2018, Surface Topography: Metrology and Properties.

Surface Topography: Metrology and Properties

L. Fleming, H. Hothi, P. Bills, 2018 .

A metrology solution for the orthopaedic industry

Liam Blunt, Xiang Jiang, Paul J. Bills, 2005 .

Comparative study of material loss at the taper interface in retrieved metal-on-polyethylene and metal-on-metal femoral components from a single manufacturer

L. Blunt, G. Isaac, S. Bhattacharya, 2017, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Technical note: Comparison of metal-on-metal hip simulator wear measured by gravimetric, CMM and optical profiling methods

L. R. Alberts, M. Stolz, R. Wood, 2018 .

Development of fused metrology methods for the analysis of hip implant tribology

L. Blunt, P. Bills, R. Racasan, 2023, Surface Topography: Metrology and Properties.

The Detection of Unfused Powder in EBM and SLM Additive Manufactured Components

Liam Blunt, Radu Racasan, Ahmed Tawfik, 2020, Int. J. Autom. Technol..

Method for Characterization of Material Loss from Modular Head-Stem Taper Surfaces of Hip Replacement Devices

L. Blunt, A. Hart, J. Skinner, 2015 .

Micro-CT analysis of marginal and internal fit of milled and pressed polyetheretherketone single crowns.

L. Blunt, P. Bills, A. Tawfik, 2023, The Journal of prosthetic dentistry.

Focus variation measurement and advanced analysis of volumetric loss at the femoral head taper interface of retrieved modular replacement hips in replica

Liam Blunt, Paul J. Bills, Radu Racasan, 2019, Journal of Physics: Conference Series.

Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners

L. Pagani, P. Bills, R. Racasan, 2017 .

The role of tribology and metrology in the latest development of bio-materials

Liam Blunt, Paul J. Bills, Xiang Jiang, 2009 .

Detailed Inspection of Metal Implants

A. Hart, J. Skinner, R. Whittaker, 2015, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Method for characterization of material loss from modular head-stem taper surfaces of hip replacement devices

L. Blunt, A. Hart, J. Skinner, 2016 .

Measures of improvement MUVoT, a Blended Learning course on the topic of measurement uncertainty for advanced vocational training

Tino Hausotte, Paul J. Bills, Andreas Loderer, 2015 .

Assessing the material loss of the modular taper interface in retrieved metal-on-metal hip replacements

Liam Blunt, Paul J. Bills, Radu Racasan, 2015 .

The taper junction contributes one third of the total volumetric material loss in large diameter metal-on-metal hip arthroplasties

L. Blunt, G. Blunn, A. Hart, 2013 .

Defining True Tribological Contact Through Application of the Morphological Method to Surface Topography

Paul J. Scott, Shan Lou, Xiangqian Jiang, 2013, Tribology Letters.

Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements

Enrico Savio, Zbigniew Humienny, Tino Hausotte, 2014 .

The influence of hydroalcoholic media on the performance of Grewia polysaccharide in sustained release tablets.

Alan M. Smith, M. H. Mahdi, B. Conway, 2017, International journal of pharmaceutics.