K. Hong

发表

Micro-forming and surface evaluation of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass

M. Ok, J. Suh, Y. Ji, 2007 .

Highly ordered self-organized TiO2 nanotube arrays prepared by a multi-step anodic oxidation process

S. Han, S. Kwun, Gyeungho Kim, 2009 .

Effects of Mn addition on microstructure and mechanical properties of (Al+x at.%Mn)3Ti intermetallic compounds prepared by mechanical alloying and spark plasma sintering

S. Kim, K. Hong, Changjoon Kang, 2004 .

Surface void nucleation under the power-law creep condition in an Al-3 at. pct Mg solid solution alloy

S. Nam, D. Shin, K. Hong, 1991 .

Growth kinetics of W5Si3 layer in WSi2/W system

W. Yoon, K. Hong, J. Doh, 2004 .

The effect of residual stress on martensitic transformation in plasma-sprayed ZrO2 (8 wt.%Y2O3) coatings

J. D. Lee, K. Hong, H. Ra, 1992 .

Cold Isostatic Pressing and Sintering Behavior of (Al +12.5%Cu) 3 Zr Nanocrystalline Intermetallic Compound Synthesized by Mechanical Alloying

S. J. Kim, H. Moon, K. Hong, 2002 .

Study of precipitation of iron in NiAl by magnetic property measurement

M. Kaufman, K. Lee, K. Hong, 2001 .

The effects of the point defects on precipitation in NiAlFe alloys

M. Kaufman, K. Hong, H. Ko, 1998 .

Analysis on the phase transition behavior of Cu base bulk metallic glass by electrical resistivity measurement

M. Ok, J. Suh, Y. Ji, 2007 .

Analysis of the crystallization of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass using electrical resistivity measurement

M. Ok, Y. Ji, Sung-Jae Chung, 2005 .

Kinetics of serrated flow in terms of dislocation interaction

S. Nam, K. Hong, 1989 .

Enhanced mechanical properties and consolidation of the ultra-fine WC–Al2O3 composites using pulsed current activated heating

Seung-Jin Oh, Byung-su Kim, K. Hong, 2016 .

Mechanical properties and rapid low-temperature consolidation of nanocrystalline Cu-ZrO2 composites by pulsed current activated heating

K. Hong, I. Shon, Jinsik Yoon, 2015, Metals and Materials International.

Properties and rapid low-temperature consolidation of nanocrystalline Fe-ZrO2 composite by pulsed current activated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2011 .

One-step synthesis and densification of nanostructured TiSi2–SiC composite from mechanically activated (TiC + 3Si) powders by high-frequency-induced heated combustion

K. Hong, I. Shon, Hyun-Kuk Park, 2007 .

Sintering of ZnO and TiO2 Nanostructures

C. Shih, C. Hsiao, K. Hong, 2008 .

Strain bursts in the cyclic creep of Al-1%Mg solid solution alloy

S. Nam, D. Shin, K. Hong, 1988 .

Growth Kinetics of MoSi2 Coating Formed by a Pack Siliconizing Process

Gyeungho Kim, K. Hong, J. Doh, 2004 .

Kinetics of chemical vapor deposition of Si on Ni substrates from a SiCl4-H2 gas precursor mixture

Gyeungho Kim, K. Hong, J. Byun, 2003 .

Formation process and microstructural evolution of Ni-silicide layers grown by chemical vapor deposition of Si on Ni substrates

Gyeungho Kim, K. Hong, J. Byun, 2003 .

Properties and rapid consolidation of nanostructured MgO–MgAl2O4 composites

K. Hong, I. Shon, Hyun-Su Kang, 2012 .

Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773 K

J. Han, Gyeungho Kim, K. Hong, 2005 .

Microstructure and growth kinetics of the Mo5Si3 and Mo3Si layers in MoSi2/Mo diffusion couple

Gyeungho Kim, K. Hong, J. Byun, 2003 .

Fabrication of Nanocrystalline TaSi2-SiC Composite by High Frequency Induction Heated Combustion Synthesis and Its Mechanical Properties.

K. Hong, I. Shon, Dong-Ki Kim, 2007 .

Consolidation of nanostructured NbSi2–SiC composite synthesized by high-frequency induction heated combustion

K. Hong, I. Shon, Hyun-Kuk Park, 2006 .

Microstructure ofin situ MoSi2/SiC nanocomposite coating formed on Mo substrate by displacement reaction

Gyeungho Kim, K. Hong, D. Kum, 2005 .

Microstructure of MoSi2-base nanocomposite coatings formed on Mo substrates by chemical vapor deposition

J. Han, Gyeungho Kim, K. Hong, 2005 .

Growth behavior and microstructure of oxide scale formed on MoSi2 coating at 773 K

W. Yoon, Gyeungho Kim, K. Hong, 2004 .

Formation of MoSi2–SiC composite coatings by chemical vapor deposition of Si on the surface of Mo2C layer formed by carburizing of Mo substrate

Gyeungho Kim, K. Hong, J. Byun, 2003 .

Effect of Cl/H input ratio on the growth rate of MoSi2 coatings formed by chemical vapor deposition of Si on Mo substrates from SiCl4–H2 precursor gases

Gyeungho Kim, K. Hong, J. Byun, 2003 .

Manufacturing and Oxidation Behavior of Silicide-Based Nanocomposite Coatings on Refractory Metals by Displacement Reaction

K. Hong, D. Kum, Jinsik Yoon, 2007 .

Low-temperature cyclic oxidation behavior of MoSi2/SiC nanocomposite coating formed on Mo substrate

J. Han, Gyeungho Kim, K. Hong, 2004 .

Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process

J. Han, Gyeungho Kim, K. Hong, 2005 .

High temperature isothermal oxidation behavior of NbSi2 coating at 1000–1450 °C

W. Yoon, Gyeungho Kim, K. Hong, 2017 .

Growth behavior and microstructure of oxide scales grown on WSi2 coating

S. Kwun, Gyeungho Kim, K. Hong, 2008 .

Rapid synthesis and consolidation of nanostuctured Al2O3-MgSiO3 composites by high frequency induction heated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2012, Metals and Materials International.

Consolidation behavior of L12 phase (Al + 12.5 at.% Cu)3Zr powder with nanocrystalline structure during CIP and subsequent sintering

S. Kim, H. Hong, K. Moon, 2004 .

The relationship between the fracture toughness and grain boundary character distribution in polycrystalline NiAl

K. Lee, K. Hong, Tae-Gon Kim, 2003 .

Rapid synthesis and consolidation of nanostructured Mg2SiO4–MgSiO3 composites by high frequency induction heated sintering

K. Hong, I. Shon, J. Doh, 2011 .

Properties and rapid sintering of a nanostructured tetragonal zirconia composites

K. Hong, I. Shon, Jinsik Yoon, 2017, Metals and Materials International.

Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering

K. Hong, I. Shon, Jinsik Yoon, 2017, Metals and Materials International.

Properties and rapid consolidation of nanostructured Al2O3-Al2SiO5 composites by high frequency induction heated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2011 .

Formation of WSi2-SiC nanocomposite coating by carburizing process followed by reactive diffusion of Si on W substrate

S. Lee, K. Hong, J. Byun, 2003 .

Surface Modification of a Dental Ti by Blasted Coating of Bio-Active Calcium Phosphate

Soo‐Hyoung Lee, H. Lim, J. Byeon, 2007 .

Superheating behavior of NiAl

K. Hong, N. Kulkarni, 1998 .

Analysis of deposition phenomena and residual stress in plasma spray coatings

Kyung-Tae Hong, H. Y. Ra, K. Hong, 1992 .

One Step Synthesis and Consolidation of Nanostructured ZrSi2-SiC Composite and its Mechanical Properties

K. Hong, I. Shon, Jinsik Yoon, 2007 .

Heterogeneities in the microstructure and mechanical properties of high-Cr martensitic stainless steel produced by repetitive hot roll bonding

Dong-Ik Kim, J. Suh, J. Shim, 2021 .

Intergraular fracture behavior of an Al-3at.%Mg solid solution alloy under the viscous glide creep condition

S. Nam, K. Hong, Dong-Heon Lee, 1991 .

DEPENDENCE OF INTERGRANULAR CREEP FRACTURE ON THE STRESS MODE IN AN Al-3at.%Mg ALLOY

S. Nam, K. Hong, Dong-Heon Lee, 1991 .

Cyclic stress effects on the grain boundary cracking in Al-Mg solid solution

S. Nam, K. Hong, 1988 .

Effects of grain boundary deformation on the creep transition under the power law regime in an AlMg solid solution alloy

S. Nam, D. Shin, K. Hong, 1992 .

Threshold stress for cyclic creep acceleration in copper

S. Nam, K. Hong, J. K. Lee, 1988 .

The effect of long range order on the activation energy for atomic migration in NiAl alloys; resistivity study

K. Hong, Haengjin Ko, M. Kaufmann, 2002 .

Precipitation Behavior of MX Phase in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic Steels

D. S. Bae, W. Jung, K. Lee, 2007 .

Coarsening of MX Nitrides in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic Steels

D. S. Bae, W. Jung, K. Lee, 2007 .

Structural evolution during heat treatment of mechanically alloyed Al-Cu-Fe-(Si) alloys

S. Kim, W. Kim, Ki Beum Kim, 2001 .

Oxidation Behavior at the Interface between E-beam Coated $ZrO_{2}$-7wt.%$Y_{2}O}_{3}$and Plasma Sprayed CoNiCrAlY

Hyonju Kim, W. Choi, H. Jeon, 1998 .

Atomistic study of temperature dependence of interaction between screw dislocation and nanosized bcc Cu precipitate in bcc Fe

B. Wirth, Dong-Ik Kim, W. Jung, 2008 .