H. Borodianska

发表

Abnormal thermal conductivity in tetragonal tungsten bronze Ba6−xSrxNb10O30

O. Vasylkiv, T. Kolodiazhnyi, Y. Mozharivskyj, 2014 .

Microstructure evolution during field-assisted sintering of zirconia spheres

Y. Sakka, S. Grasso, O. Vasylkiv, 2011 .

Grain boundary diffusion driven spark plasma sintering of nanocrystalline zirconia

Y. Sakka, O. Vasylkiv, P. Badica, 2012 .

Room and high temperature flexural failure of spark plasma sintered boron carbide

Y. Sakka, O. Vasylkiv, T. Nishimura, 2016 .

Peculiarities of the neck growth process during initial stage of spark-plasma, microwave and conventional sintering of WC spheres

Y. Sakka, O. Vasylkiv, D. Agrawal, 2012 .

Reactive spark plasma sintering of MgB2 in nitrogen atmosphere for the enhancement of the high-field critical current density

O. Vasylkiv, I. Pasuk, G. Aldica, 2016 .

Nanoblast synthesis and SPS of nanostructured oxides for SOFC

Y. Sakka, O. Vasylkiv, H. Borodianska, 2009 .

Nanoreactor engineering and SPS densification of multimetal oxide ceramic nanopowders

Y. Sakka, O. Vasylkiv, H. Borodianska, 2008 .

‘Beautiful’ unconventional synthesis and processing technologies of superconductors and some other materials

K. Endo, Y. Sakka, O. Vasylkiv, 2011, Science and technology of advanced materials.

Nanometric La0.9Sr0.1Ga0.8Mg0.2O3−x ceramic prepared by low-pressure reactive spark-plasma-sintering

Y. Sakka, T. Uchikoshi, O. Vasylkiv, 2011 .

Nonisothermal Synthesis of Yttria‐Stabilized Zirconia Nanopowder through Oxalate Processing: II, Morphology Manipulation

Y. Sakka, O. Vasylkiv, H. Borodianska, 2001 .

Bulk Ti1−xAlxN nanocomposite via spark plasma sintering of nanostructured Ti1−xAlxN–AlN powders

Y. Sakka, O. Vasylkiv, H. Borodianska, 2009 .

Deformation‐resistant Ta 0.2 Hf 0.8 C solid‐solution ceramic with superior flexural strength at 2000°C

O. Vasylkiv, T. Nishimura, K. Yoshimi, 2021, Journal of the American Ceramic Society.

Synthesis of the ZrN–ZrB2 Composite by Spark Plasma Sintering

H. Borodianska, A. Ragulya, O. Petukhov, 2019, Powder Metallurgy and Metal Ceramics.

Ultra-high elevated temperature strength of TiB2-based ceramics consolidated by spark plasma sintering

Y. Sakka, O. Vasylkiv, H. Borodianska, 2017 .

Non-catalytic facile synthesis of superhard phase of boron carbide (B13C2) nanoflakes and nanoparticles.

O. Vasylkiv, H. Su, Junshi Guo, 2012, Journal of Nanoscience and Nanotechnology.

Flash spark plasma sintering of ultrafine yttria-stabilized zirconia ceramics

Y. Sakka, O. Vasylkiv, H. Borodianska, 2016 .

High-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC

Y. Sakka, O. Vasylkiv, K. Yoshimi, 2019, Scripta Materialia.

Si3N4-TiN nanocomposite by nitration of TiSi2 and consolidation by hot pressing and spark plasma sintering.

Y. Sakka, O. Vasylkiv, H. Borodianska, 2009, Journal of nanoscience and nanotechnology.

Phase Transformations and Consolidation of Si3N4 Ceramics Activated with Yttrium and Silicon Oxides in Spark Plasma Sintering

A. V. Stepanenko, H. Borodianska, A. Ragulya, 2022, Powder Metallurgy and Metal Ceramics.

Densification kinetics of nanocrystalline zirconia powder using microwave and spark plasma sintering--a comparative study.

Y. Sakka, O. Vasylkiv, H. Borodianska, 2012, Journal of nanoscience and nanotechnology.

Modeling of the temperature distribution of flash sintered zirconia

Y. Sakka, S. Grasso, Chunfeng Hu, 2011 .

Spark plasma sintered Ni-YSZ/YSZ bi-layers for solid oxide fuel cell.

Y. Sakka, O. Vasylkiv, H. Borodianska, 2013, Journal of nanoscience and nanotechnology.

Bulks of Al-B-C obtained by reactively spark plasma sintering and impact properties by Split Hopkinson Pressure Bar

O. Vasylkiv, I. Pasuk, P. Badica, 2019, Scientific Reports.

High hardness BaCb-(BxOy/BN) composites with 3D mesh-like fine grain-boundary structure by reactive spark plasma sintering.

Y. Sakka, S. Grasso, O. Vasylkiv, 2012, Journal of nanoscience and nanotechnology.

Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere

Y. Sakka, O. Vasylkiv, Peifeng Li, 2014 .

Challenges of nanostructuring and functional properties for selected bulk materials obtained by reactive spark plasma sintering

Y. Sakka, O. Vasylkiv, G. Aldica, 2014 .

High-temperature strength of boron carbide with Pt grain-boundary framework in situ synthesized during spark plasma sintering

O. Vasylkiv, P. Badica, H. Borodianska, 2020 .

Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering

Y. Sakka, S. Grasso, O. Vasylkiv, 2014 .

B6O ceramic by in-situ reactive spark plasma sintering of a B2O3 and B powder mixture

Y. Sakka, O. Vasylkiv, P. Badica, 2014 .

A dense and tough (B4C–TiB2)–B4C ‘composite within a composite’ produced by spark plasma sintering

Y. Sakka, O. Vasylkiv, T. Nishimura, 2014 .

High temperature flexural strength in monolithic boron carbide ceramic obtained from two different raw powders by spark plasma sintering

Y. Sakka, O. Vasylkiv, P. Badica, 2016 .

Synthesis of B6O powder and spark plasma sintering of B6O and B6O–B4C ceramics

Y. Sakka, O. Vasylkiv, H. Borodianska, 2013 .

Nanoblast synthesis and consolidation of (La0.8Sr0.2)(Ga0.9Mg0.1)O(3-delta) under Spark plasma sintering conditions.

O. Vasylkiv, A. Tok, Y. Zhen, 2009, Journal of nanoscience and nanotechnology.

Fabrication of thin foils of binary Ni–Al γ/γ′ two-phase alloys by cold rolling

T. Hirano, M. Demura, K. Kishida, 2002 .

High bending strength at 1800 °C exceeding 1 GPa in TiB2-B4C composite

O. Vasylkiv, P. Badica, H. Borodianska, 2023, Scientific reports.

Synthesis of B 6 O powder and spark plasma sintering of B 6 O and B 6 O – B 4 C ceramics

Y. Sakka, O. Vasylkiv, H. Borodianska, 2013 .

Structure and physical properties of EuTa2O6 tungsten bronze polymorph

O. Vasylkiv, S. Forbes, T. Kolodiazhnyi, 2014 .