I. Shon

发表

Enhanced thermoelectric properties of tungsten disulfide-multiwalled carbon nanotube composites

Woochul Kim, S. Baik, Dongmok Lee, 2012 .

Simultaneous synthesis and consolidation of nanostructured WSi2–TaSi2 composite and its mechanical properties

I. Shon, Dong-Ki Kim, 2014 .

Simultaneous Synthesis and Consolidation of Nanostructured MoSi2-NbSi2Composite by High-Frequency Induction Heated Sintering and Its Mechanical Properties

I. Shon, Hyun-Su Kang, 2014 .

Enhanced mechanical properties of nanostructured WSi2–NbSi2 composite synthesized and sintered by high-frequency induction heating

I. Shon, Hyun-Su Kang, 2014 .

Properties and consolidation of nanocrystalline WSi2–SiC composite from mechanically activated powders by pulsed current activated combustion synthesis

K. Nam, I. Shon, J. Doh, 2011 .

Simultaneous synthesis and consolidation of nanostructured TaSi2–Si3N4 composite by pulsed current activated combustion

I. Shon, Hyun-Kuk Park, J. Doh, 2009 .

One step synthesis and densification of nanocrystalline TaSi2–Si3N4 composite from mechanically activated powders by high-frequency induction-heated combustion

Ki-Tae Lee, I. Shon, Hyun-Kuk Park, 2009 .

A new method for the identification and quantification of magnetite-maghemite mixture using conventional X-ray diffraction technique.

K. Roh, K. Song, Sung-Wook Cho, 2012, Talanta.

Effect of milling on properties and consolidation of AlN by high-frequency induction heated sintering

I. Shon, H. Kwon, Hyun-Su Oh, 2013, Electronic Materials Letters.

Mechanochemical Synthesis and Fast Low-Temperature Consolidation of Nanostructured Ni-ZrO 2 Composite and Its Mechanical Properties

I. Shon, Ju-Kwon Lee, 2015 .

Mechanochemical synthesis and rapid consolidation of nanostructured 2Co-ZrO2 composite by pulsed current activated heating

Byung-su Kim, I. Shon, Bong-Won Kwak, 2015 .

Properties and rapid consolidation of nanostructured NiTi by pulsed current activated sintering

Jeshin Park, Wonbaek Kim, Sung-Wook Cho, 2011 .

Mechanical Properties and Fabrication of a Nanostructured Nb-Al2O3 Composite by High Frequency Induction Heating

S. Oh, I. Shon, Seong-eun Kim, 2019, Korean Journal of Metals and Materials.

Rapid consolidation of a nanostructured Mo-reinforced ZrO2 composite

I. Shon, 2018 .

High-frequency induction-heated consolidation of nanostructured WC and WC-Al hard materials and their mechanical properties

I. Shon, 2017 .

Mechanical properties and rapid consolidation of nanostructured WC and WC–Al2O3 composites by high-frequency induction-heated sintering

Seung-Jin Oh, Byung-su Kim, I. Shon, 2016 .

Enhanced mechanical properties and consolidation of the ultra-fine WC–Al2O3 composites using pulsed current activated heating

Seung-Jin Oh, Byung-su Kim, K. Hong, 2016 .

Enhanced mechanical properties and fast consolidation of a nanostructured Ti–ZrO2 composite by pulsed current activated heating

Byung-su Kim, I. Shon, Bong-Won Kwak, 2016 .

Mechanical properties and rapid low-temperature consolidation of nanocrystalline Cu-ZrO2 composites by pulsed current activated heating

K. Hong, I. Shon, Jinsik Yoon, 2015, Metals and Materials International.

Rapid Synthesis and Consolidation of Nanostructured Ti-TiC Composites from TiH 2 and CNT by Pulsed Current Activated Heating

I. Shon, Na-Ra Park, 2015 .

Properties and fabrication of nanostructured 2Cr-Al₂O₃ composite for prosthetic bearing replacements.

I. Shon, Na-Ra Park, 2014, Materials science & engineering. C, Materials for biological applications.

Properties and Fabrication of Nanostructured 2/3 Cr-ZrO 2 Composite for Artificial Joint by Rapid Sinerting

I. Shon, Hyun-Su Kang, B. Kang, 2014 .

Fast low-temperature consolidation of a nanostructured 2Ti–ZrO2 composite for biomedical applications

I. Shon, Na-Ra Park, Chulwoo Song, 2014 .

Simultaneous synthesis and consolidation of nanocrystalline 3Co–Al2O3 composite by pulsed-current-activated heating, and the mechanical properties of the material

I. Shon, Na-Ra Park, Hyoung-Gon Jo, 2014, Research on Chemical Intermediates.

The effect of ball milling on the mechanical properties of TiN consolidated by pulsed current activated sintering

K. Roh, Wonbaek Kim, Jaewon Lim, 2013 .

Mechanochemical Synthesis and Rapid Consolidation of Nanocrystalline Al2O3–2.25Co Composite by High-Frequency Induction Heating and Its Mechanical Properties

I. Shon, Na-Ra Park, 2013 .

Rapid consolidation of nanocrystalline Ti3Al-Al2O3 composites from mechanically synthesized powders by high frequency induction heated sintering

Wonbaek Kim, S. Oh, Sung-Wook Cho, 2011 .

Mechanical Synthesis and Rapid Consolidation of Nanocrystalline TiAl-Al2O3 Composites by High Frequency Induction Heated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Properties and rapid low-temperature consolidation of nanocrystalline Fe-ZrO2 composite by pulsed current activated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2011 .

Properties and fast low-temperature consolidation of nanocrystalline Ni-ZrO2 composites by high-frequency induction heated sintering

I. Shon, Hyun-Su Kang, 2011 .

Consolidation and mechanical properties of nanostructured MoSi2–SiC–Si3N4 from mechanically activated powder by high frequency induction heated sintering

Dongmok Lee, I. Shon, J. Doh, 2011 .

Mechanochemical synthesis and rapid consolidation of nanocrystalline 3NiAl-Al 2 O 3 composites

I. Shon, J. Doh, Sang-Whan Park, 2011 .

Properties and consolidation of nanocrystalline 3Cu–Al2O3 composite by rapid sintering

I. Shon, Na-Ra Park, J. Doh, 2010 .

Consolidation and mechanical properties of nanostructured MoSi2 from mechanically reacted powder by high-frequency induction-heated sintering

I. Shon, J. Doh, Jinsik Yoon, 2010 .

Rapid Consolidation of Nanocrystalline Al2O3 Reinforced Cr Composite from Mechanically Alloyed Powders by Pulsed Current Activated Sintering

I. Shon, Hyun-Su Kang, In-Yong Ko, 2010 .

Consolidation and Mechanical Properties of Nanostructured SiC from Mechanically Activated Powder by High-Frequency Induction-Heated Sintering

I. Shon, Hyun-Su Kang, Na-Ra Park, 2010 .

The Effect of Holding Time on the Mechanical Properties and Microstructure of Sintered NbC Composite

Ji Young Kim, Sang-Hoon Park, K. Woo, 2010 .

Consolidation of binderless nanostructured titanium carbide by high-frequency induction heated sintering

I. Shon, J. Doh, Jinsik Yoon, 2010 .

Properties and densification of nanocrystalline MoSi2-Si3N4 composite from mechanically alloyed powders by pulsed current-activated sintering

I. Shon, Hyun-Su Kang, J. Doh, 2010 .

Properties of nanostructured tungsten carbide and their rapid consolidation by pulsed current activated sintering

K. Woo, I. Shon, J. Doh, 2010 .

Properties and synthesis of dense nanostructured VSi2-SiC by high-frequency induction heated combustion

I. Shon, J. Doh, Jinsik Yoon, 2010 .

FABRICATION OF NANOSTRUCTURED WC-BASED HARD MATERIALS WITH DIFFERENT CONTENTS OF Co BY HIGH FREQUENCY INDUCTION HEATED SINTERING

E. Kwon, Sang-Hyuk Kim, K. Woo, 2010 .

Rapid consolidation of nanocrystalline 3Ni–Al2O3 composite from mechanically synthesized powders by high frequency induction heated sintering

I. Shon, Na-Ra Park, J. Doh, 2010 .

Properties and rapid consolidation of ultra-hard tungsten carbide

K. Woo, I. Shon, J. Doh, 2010 .

Properties and rapid consolidation of nanostructured TiC-based hard materials with various binders by a high-frequency induction heated sintering

E. Kwon, K. Woo, I. Shon, 2010 .

Simultaneous synthesis and consolidation of nanostructured 1.5Ti-Al2O3 from mechanically activated powders by high-frequency induction heating

Sung-tag Oh, Jeshin Park, Wonbaek Kim, 2009 .

Mechanical properties and rapid consolidation of binderless nanostructured tantalum carbide

K. Woo, I. Shon, J. Doh, 2009 .

Properties and rapid consolidation of binderless nanostuctured NbC by pulsed current activated sintering

K. Woo, I. Shon, M. Moon, 2009 .

Mechanical properties and rapid consolidation of binderless niobium carbide

K. Woo, I. Shon, J. Doh, 2009 .

Mechanical synthesis and rapid consolidation of a nanocrystalline Cu-Al2O3 composite by high frequency induction heated sintering

B. Moon, Dongmok Lee, K. Nam, 2009 .

Sintering behavior and mechanical properties of WC-10Co, WC-10Ni and WC-10Fe hard materials produced by high-frequency induction heated sintering

K. Woo, I. Shon, J. Doh, 2009 .

Sintering of binderless WC–Mo2C hard materials by rapid sintering process

I. Shon, Hyun-Kuk Park, In-Yong Ko, 2008 .

Consolidation of binderless WC–TiC by high frequency induction heating sintering

K. Woo, I. Shon, Dong-Ki Kim, 2008 .

Mechanical Properties and Fabrication of Nanostructured 2MoSi 2 -SiC by Pulsed Current Activated Combustion Synthesis

I. Shon, J. Doh, Dong-Ki Kim, 2007 .

Sintering of ultra-fine tetragonal yttria-stabilized zirconia ceramics

Z. A. Munir, I. Shon, In-Yong Ko, 2007 .

Fabrication of WC–8 wt.%Co hard materials by two rapid sintering processes

I. Shon, J. Doh, In-Yong Ko, 2007 .

Mechanical Properties and Consolidation of WC-8wt.%Ni Hard Materials by HFIHS and PCAS

I. Shon, J. Doh, Jinsik Yoon, 2007 .

Consolidation and mechanical properties of nanostructured 2MoSi2–SiC composite synthesized by high-frequency induction heated combustion

Z. A. Munir, I. Shon, Dong-Ki Kim, 2007 .

One-step synthesis and densification of nanostructured TiSi2–SiC composite from mechanically activated (TiC + 3Si) powders by high-frequency-induced heated combustion

K. Hong, I. Shon, Hyun-Kuk Park, 2007 .

Rapid sintering of ultra fine WC and WC-Co hard materials by high-frequency induction heated sintering and their mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2007 .

Consolidation of ultra fine WC and WC–Co hard materials by pulsed current activated sintering and its mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2007 .

Rapid sintering process and mechanical properties of binderless ultra fine tungsten carbide

I. Shon, J. Doh, Jinsik Yoon, 2006 .

Rapid sintering of nanocrystalline 8 mol.%Y2O3-stabilized ZrO2 by high-frequency induction heating method

I. Shon, In-Yong Ko, H. Kim, 2006 .

One step synthesis and densification of ultra-fine WC by high-frequency induction combustion

Z. A. Munir, Sang‐Kwon Lee, I. Shon, 2006 .

Comparison of sintering behavior and mechanical properties between WC−8Co and WC−8Ni hard materials produced by high-frequency induction heating sintering

I. Shon, J. Doh, Jinsik Yoon, 2006 .

Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering

Z. A. Munir, J. Garay, I. Shon, 2004 .

Sintering of nanophase WC–15vol.%Co hard metals by rapid sintering process

I. Shon, H. Kim, D. Oh, 2004 .

Synthesis of WC and dense WC–5 vol.% Co hard materials by high-frequency induction heated combustion

I. Shon, Jiang Guojian, H. Kim, 2004 .

Synthesis of WC and dense WC–xvol.%Co hard materials by high-frequency induction heated combustion method

I. Shon, H. Kim, D. Oh, 2004 .

Synthesis of dense MoSi2 by high-frequency induction heated combustion and its mechanical properties

I. Shon, Choong-Do Park, J. Jeong, 2003 .

One-Step Synthesis of WC and Dense WC-10 vol.Co Hard Materials and Their Mechanical Properties

I. Shon, K. Chul, 오동영, 2003 .

Effects of Al2O3 on the properties and densification of 8YSZ after pulsed current activated sintering

I. Shon, Jeong-Hwan Park, In-Yong Ko, 2011 .

Effect of Fe2O3 on properties and densification of 8YSZ by pulsed current activated sintering

I. Shon, J. Doh, Jinsik Yoon, 2011 .

Preparation of Titanium-Chromium Nitride by Gas Nitriding of the Explosion Products of Cr-Coated Ti Wire

Taegong Ryu, Jeshin Park, Sujeong Lee, 2011 .

Enhanced mechanical properties of a nanostructured Mg2Al4Si5O18–MgAl2O4 composite

I. Shon, Hyun-Su Kang, J. Doh, 2014 .

Rapid synthesis and consolidation of nanostructured 2MgAl2O4–MgAl2Ti3O10 composite and its mechanical properties

I. Shon, Hyun-Su Kang, J. Doh, 2014, Research on Chemical Intermediates.

Properties and pulsed current activated consolidation of nanostuctured MgSiO3-MgAl2O4 composites

I. Shon, J. Doh, Jinsik Yoon, 2013, Metals and Materials International.

Simultaneous synthesis and consolidation of nanostuctured MgAl2O4 compound by high-frequency induction heated sintering

B. Park, I. Shon, J. Doh, 2013, Research on Chemical Intermediates.

Properties and rapid consolidation of nanostructured MgO–MgAl2O4 composites

K. Hong, I. Shon, Hyun-Su Kang, 2012 .

Rapid Synthesis and Consolidation of Nanostructured Mg2SiO4-MgAl2O4 Composites

I. Shon, Hyun-Su Kang, J. Doh, 2011 .

Enhanced mechanical properties of TiN-graphene composites rapidly sintered by high-frequency induction heating

I. Shon, 2017 .

Enhanced mechanical properties of the nanostructured AlN-graphene composites rapidly sintered by high-frequency induction heating

I. Shon, 2016 .

Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773 K

J. Han, Gyeungho Kim, K. Hong, 2005 .

One step synthesis of dense MoSi2–SiC composite by high-frequency induction heated combustion and its mechanical properties

I. Shon, Jinsik Yoon, H. Kim, 2005 .

Synthesis of Cr3C2 by SHS process

C. Won, I. Shon, S. Ko, 1997 .

Dense WSi2 and WSi2–20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion

Z. A. Munir, I. Shon, H. Kim, 2001 .

Simultaneous synthesis and densification of NiAl and Ni3Al by pressure-assisted combustion

Jong-Hyeon Lee, C. Won, I. Shon, 2002 .

Simultaneous synthesis and densification of Ti5Si3 and Ti5Si3–20 vol% ZrO2 composites by field-activated and pressure-assisted combustion

Zuhair A. Munir, Z. A. Munir, I. Shon, 1999 .

The effect of graphene reinforcement on the mechanical properties of Al2O3 ceramics rapidly sintered by high-frequency induction heating

Wonbaek Kim, I. Shon, Hyun-Su Oh, 2015 .

Effect of FeAl on Mechanical Properties and Consolidation of Nanostructured (W,Ti)C by the High Frequency Induction Heating

Byung-su Kim, I. Shon, Dong-Ki Kim, 2015 .

Pulsed Current Activated Synthesis and Consolidation of Nanostructured MoSi2–NbSi2 Composite and Its Mechanical Properties

I. Shon, Hyoung-Gon Jo, 2014 .

Pulsed current activated synthesis and consolidation of nanostructured MoSi2–TaSi2 composite

I. Shon, Hyun-Kuk Park, Na-Ra Park, 2013, Research on Chemical Intermediates.

Mechanical synthesis and rapid consolidation of nanostructured FeAl–Al2O3 composites by high-frequency induction heated sintering

B. Park, I. Shon, J. Doh, 2012 .

Properties and rapid consolidation of nanocrystalline 8MoSi2-Si3N4 by high frequency induction heated sintering

I. Shon, Na-Ra Park, J. Doh, 2011 .

Rapid consolidation of nanostructured TaSi2 from mechanochemically synthesized powder by high frequency induction heated sintering

I. Shon, In-Yong Ko, Seung-Myoung Chae, 2011 .

Rapid synthesis and consolidation of nanostructured TaSi2–SiC–Si3N4 composite from mechanically activated powders by high-frequency induction-heated combustion

I. Shon, Jinsik Yoon, In-Yong Ko, 2010 .

Rapid consolidation of nanocrystalline NbSi2-Si3N4 composites by pulsed current activated combustion synthesis

K. Nam, I. Shon, Jeong-Hwan Park, 2010 .

ZrSi2–SiC composite obtained from mechanically activated ZrC + 3Si powders by pulsed current activated combustion synthesis

K. Nam, I. Shon, Jinsik Yoon, 2010 .

Consolidation of nanostructured ZrSi2–Si3N4 synthesized from mechanically activated (4ZrN + 11Si) powders by high frequency induction heated combustion synthesis

I. Shon, Hyun-Kuk Park, Jinsik Yoon, 2009 .

Simultaneous high-frequency induction heated combustion synthesis and consolidation of nanostructured HfSi2–SiC composite

I. Shon, J. Doh, Jinsik Yoon, 2009 .

Simultaneous synthesis and consolidation of nanostructured NbSi2–Si3N4 composite from mechanically activated powders by high-frequency induction-heated combustion

Z. A. Munir, I. Shon, Hyun-Kuk Park, 2008 .

Simultaneous pulsed current activated combustion synthesis and densification of NbSi2–SiC composite

I. Shon, Hyun-Kuk Park, Jinsik Yoon, 2008 .

Properties and consolidation of nanocrystalline NbSi2-SiC-Si3N4 composite by pulsed current activated combustion

I. Shon, J. Doh, Jinsik Yoon, 2008 .

Fabrication of Nanocrystalline TaSi2-SiC Composite by High Frequency Induction Heated Combustion Synthesis and Its Mechanical Properties.

K. Hong, I. Shon, Dong-Ki Kim, 2007 .

Consolidation of nanostructured NbSi2–SiC composite synthesized by high-frequency induction heated combustion

K. Hong, I. Shon, Hyun-Kuk Park, 2006 .

Synthesis of dense WSi2 and WSi2-xvol.%SiC composites by high-frequency induction heated combustion and its mechanical properties

I. Shon, Jinsik Yoon, In-Yong Ko, 2006 .

Simultaneous synthesis and consolidation process of ultra-fine WSi2–SiC and its mechanical properties

I. Shon, Jinsik Yoon, H. Kim, 2005 .

Fabrication and Mechanical Properties of Dense WSi 2 -20vol.%SiC Composite by High-Frequency Induction-Heated Combustion Synthesis

Sang‐Kwon Lee, I. Shon, H. Kim, 2005 .

Electrical Wire Explosion of Cr-Coated Ti Wire in N2 Gas

Taegong Ryu, Jeshin Park, Sujeong Lee, 2010 .

Synthesis of TiN Nanoparticles by Explosion of Ti Wire in Nitrogen Gas

Jeshin Park, Sujeong Lee, Wonbaek Kim, 2009 .

Synthesis of TiC, TiC-Cu Composites, and TiC-Cu Functionally Graded Materials by Electrothermal Combustion

Z. A. Munir, I. Shon, 1998 .

Mechanical properties of nanostructured TiN–AlN composites rapidly consolidated by pulsed current activated sintering

Wonbaek Kim, Jaewon Lim, I. Shon, 2014 .

Growth kinetics and oxidation behavior of WSi2 coating formed by chemical vapor deposition of Si on W substrate

Sung-Jae Chung, Gyeungho Kim, I. Shon, 2006 .

Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process

J. Han, Gyeungho Kim, K. Hong, 2005 .

Simultaneous Synthesis and Densification of MoSi2 by Field‐Activated Combustion

Kazuo Yamazaki, Zuhair A. Munir, K. Yamazaki, 1996 .

Fast consolidation and properties of a nanostructured AlCr2–2Al2O3 composite from mechanochemically synthesized powders by pulsed current activated heating

I. Shon, Bong-Won Kwak, 2016 .

Synthesis of Ti5Si3-x Nb composites by the field-activated combustion method

I. Shon, 1997 .

Synthesis of MoSi2xNb and MoSi2yZrO2 composites by the field-activated combustion method

Z. A. Munir, I. Shon, 1995 .

Electric field-activated combustion synthesis of Ti5Si3-Nb and Ti5Si3-ZrO2 composites

Z. A. Munir, I. Shon, Z. Munir, 1997 .

Synthesis of WSi2–ZrO2 and WSi2–Nb composites by field-activated combustion

Z. A. Munir, I. Shon, H. Kim, 2001 .

Effect of Fe2O3 addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)

Ki-Tae Lee, I. Shon, Jeong-Hwan Park, 2009 .

Rapid synthesis and consolidation of nanostuctured Al2O3-MgSiO3 composites by high frequency induction heated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2012, Metals and Materials International.

Rapid synthesis and consolidation of nanostructured Mg2SiO4–MgSiO3 composites by high frequency induction heated sintering

K. Hong, I. Shon, J. Doh, 2011 .

Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)

Ki-Tae Lee, I. Shon, Byung-hyun Choi, 2011 .

Preparation of porous Ni–YSZ cermet anodes for solid oxide fuel cells by high frequency induction heated sintering

Ki-Tae Lee, I. Shon, Chun-Kang Cho, 2011 .

Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating

Zuhair A. Munir, Z. A. Munir, I. Shon, 2005 .

Synthesis and Sintering of Nanostructured ZrB2-Al2O3 Composite

I. Shon, 2021, Korean Journal of Metals and Materials.

Rapid Sintering and Synthesis of Nanocrystalline Ta-ZrO2 Composite

I. Shon, Seong-eun Kim, 2020 .

Properties and rapid sintering of a nanostructured tetragonal zirconia composites

K. Hong, I. Shon, Jinsik Yoon, 2017, Metals and Materials International.

Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering

K. Hong, I. Shon, Jinsik Yoon, 2017, Metals and Materials International.

Enhanced Mechanical Properties of Nanostructured 2.25CoAl-Al2O3 Composite Sintered by Pulsed Current Activated Heating

Byung-su Kim, I. Shon, Bong-Won Kwak, 2016 .

Mechanical properties and rapid sintering of nanostructured WC and WC–TiAl3 hard materials by the pulsed current activated heating

Byung-su Kim, I. Shon, Bong-Won Kwak, 2016 .

Pulsed current activated synthesis and rapid consolidation of a nanostructured Mg2Al4Si5O18 and its mechanical properties

I. Shon, Hyun-Su Kang, J. Doh, 2015, Metals and Materials International.

Properties of nanostructured TiC and TiC–TiAl3 hard materials rapidly sintered by the pulsed current activated heating

I. Shon, H. Kwon, Hyoung-Gon Jo, 2015 .

Enhanced properties of nanostructured ZrO2–graphene composites rapidly sintered via high-frequency induction heating

Seok-Jae Lee, I. Shon, Soonji Kwon, 2015 .

Properties and Rapid Consolidation of Nanostructured TiC and TiCTiAl Hard Materials by High-Frequency Induction Heating

I. Shon, H. Kwon, Hyoung-Gon Jo, 2014 .

Simultaneous Synthesis and Consolidation of Nanostructured MgSiO 3 –Mg 3 Al 2 Si 3 O 12 Composite and Its Mechanical Properties

I. Shon, Hyun-Su Kang, J. Doh, 2014 .

Simultaneously rapid synthesis and consolidation of nanostructured Mg0.3Al1.4Ti1.3O5 by high-frequency induction heating

I. Shon, Hyun-Su Kang, J. Doh, 2014, Electronic Materials Letters.

Synthesis and Sintering of Nanostructured Mg 4 Al 2 Ti 9 O 25 by High-Frequency Induction Heating and Its Mechanical Properties

I. Shon, Hyun-Su Kang, J. Doh, 2014 .

Simultaneous synthesis and rapid consolidation of a nanocrystalline Mg0.6Al0.8Ti1.6O5 by high-frequency induction heating and its mechanical properties

I. Shon, Hyun-Su Kang, J. Doh, 2014 .

Mechanical properties and consolidation of binderless nanostructured (Ti,Cr)C from mechanochemically-synthesized powder by high-frequency induction heating sintering

Jaewon Lim, I. Shon, H. Kwon, 2013 .

Rapid Consolidation and Mechanical Properties of Binderless Nanostructured (W,Ti)C by High-Frequency Induction Heating

I. Shon, Hyun-Su Kang, H. Kwon, 2013 .

Simultaneous Synthesis and Rapid Consolidation of Nanostructured (Ti,Mo)C and Its Mechanical Properties

I. Shon, H. Kwon, Hyoung-Gon Jo, 2013 .

Mechanochemical Synthesis and Rapid Consolidation of Nanostructured (Ti,Al,V)C by Pulsed Current Activated Heating and Its Mechanical Properties

I. Shon, H. Kwon, Hyun-Su Oh, 2013 .

Properties of Nanostructured TiCN and TiCNTiAl Hard Materials Sintered by the High-Frequency Induction-Heating

Jaewon Lim, I. Shon, Hyun-Su Kang, 2013 .

Mechanical properties of (W, Ti)C and (W, Ti)C–NiAl3 cermet consolidated by the high-frequency induction-heating method

K. Roh, Wonbaek Kim, Sung-Wook Cho, 2013 .

Simultaneous synthesis and consolidation of Mg4Al2Ti9O25 by pulsed current activated heating and its mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2013 .

Simultaneous synthesis and consolidation of nanocrystalline Fe2Al5 and Fe2Al5-Al2O3 by pulsed current activated sintering and their mechanical properties

I. Shon, Hyun-Kuk Park, J. Doh, 2013, Metals and Materials International.

High-frequency induction heated sintering of High-energy ball milled TiC0.5N0.5 powders and mechanical properties of the sintered products

K. Roh, Sujeong Lee, Wonbaek Kim, 2013 .

Mechanochemical synthesis and high-frequency induction heated consolidation of nanostructured Ti5Si3 and its mechanical properties

Wonbaek Kim, Sung-Wook Cho, Jaewon Lim, 2013, Research on Chemical Intermediates.

Effect of FeAl3 on properties of (W,Ti)C–FeAl3 hard materials consolidated by a pulsed current activated sintering method

I. Shon, J. Doh, Jinsik Yoon, 2012 .

Pulsed Current Activated Synthesis and Consolidation of Nanostuctured MgTiO 3 Compound

B. Park, I. Shon, Hyun-Su Kang, 2012 .

Properties and Rapid Consolidation of Nanocrystalline TiCo Compounds by High-Frequency Induction Heated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Simultaneous Synthesis and Densification of a Nanocrystalline (W,Ti)Si2-SiC Composite from Mechanically Activated Powders by High Frequency Induction Heating

I. Shon, In-Yong Ko, Ha-young Song, 2011 .

Properties and rapid consolidation of nanostructured Al2O3-Al2SiO5 composites by high frequency induction heated sintering

K. Hong, I. Shon, Hyun-Su Kang, 2011 .

Fast consolidation of a nanocrystalline Al2O3 reinforced 3.7Fe0.54Cr0.18Al0.26Si0.016 composite from mechanical synthesized powder through pulsed current activated heating

I. Shon, J. Doh, Sang-Whan Park, 2011 .

Mechanical synthesis and rapid consolidation of a nanocrystalline 5.33Fe 0.37Cr 0.16Al 0.4Si 0.07–Al 2O 3 composite by high-frequency induction heating

I. Shon, J. Doh, Sang-Whan Park, 2011 .

Mechanical synthesis and rapid consolidation of a nanocrystalline 3.3Fe0.6Cr0.3Al0.1–Al2O3 composite by high frequency induction heating

I. Shon, J. Doh, Sang-Whan Park, 2011 .

Rapid consolidation of nanostructured Ti from mechanically activated Ti and TiH2 by pulsed-current activated sintering, and the mechanical properties of the product

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Pulsed current activated consolidation of nanostructured Fe 3 Al and its mechanical property

I. Shon, J. Doh, Jinsik Yoon, 2011 .

Rapid Consolidation of Nanostructured TiCu Compound by High Frequency Induction Heating and Its Mechanical Properties

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2010 .

Mechanical Properties and Fabrication of TiAl Alloy by Pulsed Current Activated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2010 .

Properties and Rapid Consolidation of Nanostructured Fe3Al Compound by High Frequency Induction Heating

I. Shon, J. Doh, Jinsik Yoon, 2010 .

Fabrication of 4.25 Co 0.53 Fe 0.47 -Al 2 O 3 Composite by High Frequency Induction Heated Combustion Synthesis

Ho Namkung, I. Shon, Na-Ra Park, 2009 .

Fabrication of WC-Graphene-Al Composites by Rapid Sintering and Their Mechanical Properties

I. Shon, 2021 .

Mechanical Properties and Rapid Sintering of WC-BN-Al Composites

I. Shon, Seong-eun Kim, Sulei Hong, 2020 .

Rapid consolidation of nanostuctured WC-FeAl3 by pulsed current activated heating and its mechanical properties

Seok-Jae Lee, I. Shon, 2017 .

Effect of Al on sintering and mechanical properties of WC-Al composites

I. Shon, 2016 .

Bulk (Ti,Cr)N consolidated by pulsed current activated sintering and its mechanical properties

K. Roh, Sujeong Lee, Wonbaek Kim, 2013 .

Evaluation of oxidation and mechanical properties of nanosized WC–10% Nicrobraz composites consolidated by high frequency induction heated sintering

S. H. Kim, K. Woo, I. Shon, 2012 .

Microstructure and oxidation behavior of in situ formed TaSi2–Si3N4 nanocomposite coating grown on Ta substrate

Gyeungho Kim, I. Shon, J. Doh, 2008 .

Simultaneous Synthesis and Densification of Nanostructured NbSi2-SiC-Si3N4 by Rapid Sintering

I. Shon, Hyun-Su Kang, In-Yong Ko, 2010 .

The Effect of Rapid Consolidation of Nanostructured MoSi2-SiC Composite on its Mechanical Properties

I. Shon, In-Yong Ko, Seung-Myoung Chae, 2010 .

Rapid consolidation of nanocrystalline Al2O3 reinforced Ni–Fe composite from mechanically alloyed powders by high frequency induction heated sintering

Dongmok Lee, I. Shon, Na-Ra Park, 2009 .

Pulsed current activated combustion synthesis and consolidation of nanostructured ReSi1.75

I. Shon, Su-Chul Kim, Byung-Ryang Kim, 2009 .

One step synthesis and consolidation of WC-10 vol.% Co hard material

Charn-Woon Park, I. Shon, Hwan-Cheol Kim, 2002 .

Microstructures and mechanical properties of biocompatible Ti-42 wt.%Nb P/M alloy

K. Woo, I. Shon, H. B. Lee, 2008 .

Rapid sintering of ultrafine WC-Ni cermets

Zuhair A. Munir, Z. A. Munir, I. Shon, 2006 .

High-frequency induction sintering of B4C ceramics and its mechanical properties

I. Shon, 2016 .

Rapid Consolidation of TiN–Cr2N–(Ti,Cr)N Nanoparticles Using Pulsed Current Activated Sintering and the Mechanical Properties of Sintered Product

K. Roh, Wonbaek Kim, Jaewon Lim, 2012 .

Fabrication of nanopowder and consolidation of nanocrystalline 5Ni0.6Fe0.4-Al2O3 composite by rapid sintering

Jeshin Park, Wonbaek Kim, I. Shon, 2009 .

Mechanical properties and rapid sintering of binderless nanostructured TiC and WC by high frequency induction heated sintering

I. Shon, 2016 .

Properties and consolidation of nanostructured Ce0.8Gd0.2O1.9 by pulsed-current-activated sintering

Ki-Tae Lee, K. Nam, I. Shon, 2008 .

One-step synthesis of dense tungsten carbide-cobalt hard materials

Z. A. Munir, I. Shon, H. Kim, 2002 .

Simultaneous synthesis and densification of WSi2 and WSi2-20vol.%Nb composite by field-activated and pressure-assisted combustion

I. Shon, Hwan-Cheol Kim, I. J. Shon, 2000 .

Rapid Sintering and Synthesis of Nanostuctured FeCrAlSi-Al_2O_3 Composite by High-Frequency Induction Heating

I. Shon, J. Doh, Sang-Whan Park, 2011 .

High-Frequency Induction-Heated Combustion Synthesis and Consolidation of Nanostructured NbSi 2 from Mechanically Activated Powders

K. Nam, I. Shon, Jinsik Yoon, 2008 .

Rapid consolidation of nanostructured FeAl compound by high frequency induction heating and its mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2010 .

Pulsed current activated combustion synthesis and consolidation of ultrafine NbSi2 from mechanically activated powders

B. Moon, K. Nam, I. Shon, 2009 .

Mechanical Properties and Fabrication of Nanostructured ReSi 1.75 by High Frequency Induction Heated Combustion Synthesis

I. Shon, Su-Chul Kim, Byung-Ryang Kim, 2009 .

Study on Pulsed Current Activated Sintering

I. Shon, 2014 .

One Step Synthesis and Consolidation of Nanostructured ZrSi2-SiC Composite and its Mechanical Properties

K. Hong, I. Shon, Jinsik Yoon, 2007 .

Sintering behavior and mechanical properties of binderless WC-TiC produced by pulsed current activated sintering

I. Shon, Dong-Ki Kim, In-Yong Ko, 2007 .

The Effect of Phases in Nanoparticles Produced by Electrical Wire Explosion on Arsenic(III) Removal

J. Bang, K. Song, K. Ko, 2012 .

Simultaneous Synthesis and Consolidation of Nanostructured ZrB₂-ZrO₂ Composite.

I. Shon, Jinsik Yoon, Seong-eun Kim, 2020, Journal of nanoscience and nanotechnology.

Rapid consolidation of nanostructured Mo-Al2O3 composite from mechanically synthesized powders

I. Shon, 2018 .

Effect of BN Addition on the Mechanical Properties of AlN

W. Cho, S. Oh, I. Shon, 2019, Korean Journal of Metals and Materials.

Mechanochemical synthesis and consolidation of a nanostructured B-Al2O3 hard composite by high-frequency induction-heated sintering

I. Shon, 2017 .

Properties and Rapid Consolidation of Nanostructured 4Cr-3ZrO2 Composite by Pulsed Current Activated Sintering

I. Shon, B. Kang, 2015 .

Simultaneous Synthesis and Sintering of Nanostructured MgAl2O4-Mg3Al2Si3O12 Composite and its Mechanical Properties

I. Shon, Hyun-Su Kang, J. Doh, 2014 .

Rapid Sintering of Nanostructured (Mo,W)Si2 and its Mechanical Properties

I. Shon, Hyun-Su Kang, 2014 .

Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties

I. Shon, H. Kwon, Hyoung-Gon Jo, 2014 .

Simultaneous synthesis and densification of MoSi2-20vol.%Nb composite and MoSi2-20vol.%ZrO2 composite by field-activated and pressure-assisted combustion

I. Shon, H. Kim, D. Rho, 1999 .

Austenite stability and mechanical properties of nanocrystalline Fe–Mn alloy fabricated by spark plasma sintering with variable Mn content

Seok-Jae Lee, Seung-Jin Oh, I. Shon, 2018 .

Fabrication of Nanostructured Ti from Ti and TiH2 by Rapid Sintering and Its Mechanical Properties

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2012 .

Automated generation of carbon nanotube morphology in cement composite via data-driven approaches

Seung-Mok Lee, S.M. Park, I. Shon, 2019, Composites Part B: Engineering.

Fabrication of ultrafine binderless WC and WC-Ni hard materials by a pulsed current activated sintering method

I. Shon, J. Doh, Jinsik Yoon, 2006 .

Mechanical synthesis and rapid consolidation of nanocrystalline 3Fe0.67Cr0.33-Al2O3 composite by high frequency induction heating

I. Shon, Na-Ra Park, J. Doh, 2011 .

Simultaneous synthesis and consolidation of a nanostructured 4 FeAl 2 O 3 composite from mechanically activated powders by high frequency induction heated sintering

Jeshin Park, Wonbaek Kim, I. Shon, 2009 .

Influence of oxygen concentration on mechanical properties of molybdenum powder during sintering.

Hyung‐Seok Kim, Jung-Min Oh, Jaewon Lim, 2014, Journal of nanoscience and nanotechnology.

Effect of Fe2O3 on properties and densification of Ce0.8Gd0.2O2−δ by PCAS

Ki-Tae Lee, I. Shon, Dong-Ki Kim, 2009 .

Microstructure and Mechanical Properties of Highly Alloyed FeCrMoVC Steel Fabricated by Spark Plasma Sintering

Seok-Jae Lee, Seung-Jin Oh, J. Jun, 2018, Metals and Materials International.

Rapid Synthesis and Consolidation of a Nanostructured Mg0.6Al0.8Ti1.6O5 Compound by Pulsed Current Activated Heating

I. Shon, Hyun-Su Kang, J. Doh, 2013 .

Simultaneous synthesis and consolidation of nanocrystalline Al-TiC composite by high-frequency induction heating

I. Shon, 2016 .

Effects of TiC Addition on Strain-Induced Martensite Transformation and Mechanical Properties of Nanocrystalline Fe-Mn Alloy Fabricated by Spark Plasma Sintering

Y. Moon, Seok-Jae Lee, I. Shon, 2023, Archives of Metallurgy and Materials.

Mechanical Properties and Fabrication of WC-Co Hard Materials by Rapid Sintering Method for Friction Stir Welding Tool Application

Jung-Han Ryu, I. Shon, Ik-Hyun Oh, 2012 .