J. Jeon

发表

Mis-Match Limit Load Analyses and Fracture Mechanics Assessment for Welded Pipe with Circumferential Crack at the Center of Weldment

Yun‐Jae Kim, T. Jin, J. S. Kim, 2010 .

Computational simulation of cold work effect on PWSCC growth in Alloy 600TT steam generator

Yun‐Jae Kim, Jong-Sung Kim, J. Jeon, 2016 .

PWSCC Growth Assessment Model Considering Stress Triaxiality Factor for Primary Alloy 600 Components

Yun‐Jae Kim, Jong-Sung Kim, J. S. Kim, 2016 .

Investigation of Thermal Aging Effect on Fracture Toughness of Cast Stainless Steels Using Experimental and Numerical Approach

S. Y. Lee, Yun‐Jae Kim, J. W. Kim, 2015 .

Characterization of the effect of notch bluntness on hydrogen embrittlement and fracture behavior using FE analyses

Yun‐Jae Kim, R. Ainsworth, N. Larrosa, 2015 .

Ductile Failure Simulation of Tensile Plates with Multiple Through-Wall Cracks Based on Damage Mechanics

Yun‐Jae Kim, N. Kim, C. Oh, 2012 .

Extracting ductile fracture toughness from small punch test data using numerical modeling

Yun‐Jae Kim, Jin Weon Kim, Sa Yong Lee, 2016 .

Fracture toughness prediction of aged CF8M using small punch test

Yun‐Jae Kim, J. W. Kim, J. Jeon, 2015 .

Possibility to Estimate Fracture Toughness of Ductile Steel Materials from Small Punch Test Data

Yun‐Jae Kim, J. W. Kim, J. Jeon, 2015 .

Burst pressure estimation of Alloy 690 axial cracked steam generator U-bend tubes using finite element damage analysis

Yun‐Jae Kim, Jong-Sung Kim, J. S. Kim, 2020 .

Limit and plastic collapse loads for un-reinforced mitred bends under pressure and bending

Yun‐Jae Kim, P. Budden, J. Jeon, 2011 .

Numerical Prediction of Maximum Load-Carrying Capacity of Cracked Alloy 690TT Steam Generator Tubes

Yun‐Jae Kim, J. S. Kim, Jin Weon Kim, 2016 .

Fracture mechanics assessment for different notch sizes using finite element analysis based on ductile failure simulation

Yun‐Jae Kim, D. Lee, J. Han, 2016 .

Effect of thermal ageing of CF8M on multi-axial ductility and application to fracture toughness prediction

Yun‐Jae Kim, J. W. Kim, J. Jeon, 2015 .

Burst simulations of steam generator tubes using FE damage analyses

J. Jeon, Yong Ju Kim, Jung-Hun Kim, 2014 .

Finite Element Damage Analysis for Cast Stainless Steel (CF8M) Material Considering Variance in Experimental Data

Yun‐Jae Kim, N. Kim, J. Jeon, 2012 .

Computational simulation of cold work effect on PWSCC growth in Alloy 600TT steam generator

Yun‐Jae Kim, Jong-Sung Kim, J. Jeon, 2016, Journal of Mechanical Science and Technology.

Effect of Weld Heat Input Modeling and the Material Hardening Model for Gas Tungsten Arc Welding Finite Element Analysis

Sung-Sik Kang, C. Oh, J. Jeon, 2021 .

Comparison of numerical predictions with experimental burst pressures of tubes with multiple surface cracks

Yun-Jae Kim, Myeong Woo Lee, Jun Young Jeon, 2018, Engineering Fracture Mechanics.

A Strain Rate Dependent Computational Model of Ductile Damage for C(T) Specimen

J. S. Kim, Yun‐Jae Kim, J. W. Kim, 2015 .

Plastic limit loads for piping branch junctions under out-of-plane bending

Peter J. Budden, Yun-Jae Kim, Jun Young Jeon, 2012 .