Masakuni Oikawa

发表

Near-zero emissions with high thermal efficiency realized by optimizing jet plume location relative to combustion chamber wall, jet geometry and injection timing in a direct-injection hydrogen engine

Y. Takagi, Masakuni Oikawa, Ryota Sato, 2019, International Journal of Hydrogen Energy.

Effect of high compression ratio on improving thermal efficiency and NOx formation in jet plume controlled direct-injection near-zero emission hydrogen engines

Y. Takagi, Masakuni Oikawa, Y. Mihara, 2022, International Journal of Hydrogen Energy.

Effect of supercharging on improving thermal efficiency and modifying combustion characteristics in lean-burn direct-injection near-zero-emission hydrogen engines

Y. Takagi, Masakuni Oikawa, Yoshihisa Kojiya, 2021, International Journal of Hydrogen Energy.

Effect of modified combustion chamber configuration and enhanced squish flow on improving thermal efficiency in jet-plume-controlled direct-injection near-zero emission hydrogen engines

Y. Takagi, Masakuni Oikawa, Y. Mihara, 2022, International Journal of Engine Research.

Development of High Pressure H2 Gas Injectors, Capable of Injection at Large Injection Rate and High Response Using a Common-rail Type Actuating System for a 4-cylinder, 4.7-liter Total Displacement, Spark Ignition Hydrogen Engine

Yoshio Sato, Kimitaka Yamane, Y. Goto, 2011 .

Research on evaluation of hydrogen jet behavior and assessment of cooling loss reduction by measuring local heat flux in direct injection hydrogen engines

Y. Takagi, Masakuni Oikawa, Ryota Sato, 2019, Transactions of the JSME (in Japanese).

Effect of Fuel Jet Location and Ignition Point in the Combustion Chamber on Thermal Efficiency and NOx Formation in Rich Mixture Plume Ignition Combustion of High Pressure Direct Injection Hydrogen Engines

Y. Takagi, Masakuni Oikawa, Yoshio Sato, 2013 .

Optimization of Hydrogen Jet Configuration by Single Hole Nozzle and High Speed Laser Shadowgraphy in High Pressure Direct Injection Hydrogen Engines

Y. Takagi, Y. Kondo, Masakuni Oikawa, 2011 .

The Verification of Engine Analysis Model Accuracy by Measuring Oil Film Pressure in the Main Bearings of a Motorcycle High-Speed Engine Using a Thin-Film Sensor

Masakuni Oikawa, Y. Mihara, Takumi Iwata, 2022, Lubricants.