J. Palm

发表

A simulation study on the impact of band gap profile variations and secondary barriers on the temperature behavior, performance ratio, and energy yield of Cu(In,Ga)(Se,S)2 solar cells

J. Parisi, C. Schubbert, P. Eraerds, 2015 .

Comprehensive simulation model for Cu(In,Ga)(Se,S)2 solar cells

J. Parisi, C. Schubbert, P. Eraerds, 2015 .

Improving performance by Na doping of a buffer layer—chemical and electronic structure of the InxSy:Na/CuIn(S,Se)2 thin‐film solar cell interface

Wanli Yang, L. Weinhardt, M. Bär, 2018 .

The formation of CuInSe2 thin-film solar cell absorbers by laser annealing of electrodeposited precursors

R. Hock, J. Schulze, F. Hergert, 2008 .

Band alignment at sputtered ZnSx O1–x/Cu(In,Ga)(Se,S)2 heterojunctions

R. Klenk, M. Lux‐Steiner, T. Niesen, 2012 .

Lateral inhomogeneity of the Mg/(Zn+Mg) composition at the (Zn,Mg)O/CuIn(S,Se)2 thin-film solar cell interface revealed by photoemission electron microscopy

S. Visbeck, F. Kronast, L. Weinhardt, 2013 .

Junction formation in chalcopyrite solar cells by sputtered wide gap compound semiconductors

R. Klenk, T. Niesen, I. Lauermann, 2011 .

Ultrasonically sprayed indium sulfide buffer layers for Cu(In,Ga)(S,Se)2 thin-film solar cells

A. Chirilă, A. Tiwari, S. Buecheler, 2009 .

Deep-levels in stoichiometry-varied Cu(In,Ga)(S,Se)2 solar cells

F. Karg, C. Deibel, V. Dyakonov, 2003 .

Annealing-Induced Effects on the Chemical Structure of the In2S3/CuIn(S,Se)2 Thin-Film Solar Cell Interface

Wanli Yang, L. Weinhardt, M. Bär, 2015 .

In situ investigation of the formation of Cu(In,Ga)Se2 from selenised metallic precursors by X-ray diffraction—The impact of Gallium, Sodium and Selenium excess

A. Weber, R. Hock, F. Hergert, 2005 .

Predicted reaction paths for the formation of multinary chalcopyrite compounds

R. Hock, F. Hergert, S. Jost, 2006 .

A study of kesterite Cu2ZnSn(Se,S)4 formation from sputtered Cu–Zn–Sn metal precursors by rapid thermal processing sulfo-selenization of the metal thin films

R. Hock, S. Jost, A. Hölzing, 2013 .

Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors

R. Hock, S. Jost, R. Lechner, 2013 .

Investigation of the solid state reactions by time-resolved X-ray diffraction while crystallizing kesterite Cu2ZnSnSe4 thin films

R. Hock, S. Jost, A. Hölzing, 2013 .

The formation mechanism of secondary phases in Cu2ZnSnSe4 absorber layer

R. Hock, S. Jost, R. Lechner, 2015 .

The effect of secondary phases on Cu2ZnSn(S,Se)4 based solar cell

R. Hock, V. Moreau, S. Jost, 2014, 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC).

All Laser Patterning Serial Interconnection for Highly Efficient CIGSSe Modules

H. Huber, A. Heiss, F. Karg, 2011 .

Direct determination of the band alignment at the (Zn,Mg)O/CISSe interface

E. Umbach, L. Weinhardt, T. Niesen, 2011 .

Sputtered Zn(O,S) for junction formation in chalcopyrite‐based thin film solar cells

R. Klenk, I. Lauermann, T. Rissom, 2010 .

The temperature dependence of radiative and nonradiative processes at Er–O centers in Si

M. Opher-Lipson, J. Michel, L. Kimerling, 1999 .

Properties of Ion Implanted and UHV-CVD Grown Si:Er

L. Kimerling, X. Duan, B. Zheng, 1996 .

Defects In Erbium/Oxygen Implanted Silicon

J. Michel, L. Kimerling, X. Duan, 1996 .

Defects and Future Silicon Technology

L. Kimerling, J. Palm, 1995 .

Light Emission from Silicon

Jurgen Michel, Lionel C. Kimerling, J. Palm, 1996 .

Band-Gap Widening at the Cu(In,Ga)(S,Se)2 Surface: A Novel Determination Approach Using Reflection Electron Energy Loss Spectroscopy.

E. Handick, H. Schwab, L. Weinhardt, 2016, ACS applied materials & interfaces.

Surface A Novel Determination Approach Using Reflection Electron Energy Loss Spectroscopy

E. Handick, H. Schwab, L. Weinhardt, 2016 .

Real-time investigations on the formation of Cu(In,Ga)(S,Se)2 while annealing Cu–In–Ga precursors with different sulphur–selenium mixtures

R. Hock, S. Jost, A. Hölzing, 2013 .

Chemical structure of the (Zn1−x,Mgx)O/CuIn(S,Se)2 interface in thin film solar cells

S. Visbeck, A. Schöll, E. Umbach, 2009 .

New developments in Cu(In,Ga)(S, Se)2 thin film modules formed by rapid thermal processing of stacked elemental layers

H. Vogt, W. Stetter, S. Visbeck, 2006 .

CIS module pilot processing applying concurrent rapid selenization and sulfurization of large area thin film precursors

J. Palm, H. Vogt, S. Visbeck, 2003 .

A thermodynamical approach to the formation reactions of sodium-doped Cu(In,Ga)Se2

R. Hock, F. Hergert, S. Jost, 2006 .

Formation of CuInSe2 by the annealing of stacked elemental layers—analysis by in situ high-energy powder diffraction

P. Berwian, R. Hock, V. Honkimäki, 2003 .

Scanning electron microscopical examination of the impact of laser patterning on microscopic inhomogeneities of Cu(In,Ga)(Se,S)2 absorbers produced by rapid thermal processing

R. Hock, S. Jost, A. Hölzing, 2013 .

Formation reactions of chalcopyrite compounds and the role of sodium doping

R. Hock, F. Hergert, S. Jost, 2007 .

Second generation CIS solar modules

Volker Probst, F. Karg, Jörg Palm, 2004 .

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

Heinz P. Huber, Gerhard Heise, Regina Moser, 2015 .

Optimization of picosecond laser structuring for the monolithic serial interconnection of CIS solar cells

Heinz P. Huber, Gerhard Heise, J. Palm, 2013 .

Investigation of the ablation of zinc oxide thin films on copper–indium-selenide layers by ps laser pulses

Matthias Domke, Heinz P. Huber, Gerhard Heise, 2011 .

Monolithical Serial Interconnects of Large CIS Solar Cells with Picosecond Laser Pulses

Matthias Domke, Heinz P. Huber, Gerhard Heise, 2011 .

Monolithic interconnection of CIGSSe solar cells by picosecond laser structuring

Heinz P. Huber, Gerhard Heise, Christian Hellwig, 2010, LASE.

The formation of the thin-film solar cell absorber CuInS2 by annealing of Cu–In–S stacked elemental layer precursors — A comparison of selenisation and sulfurisation

R. Hock, F. Hergert, S. Jost, 2009 .

CIGSSe thin film PV modules: from fundamental investigations to advanced performance and stability

J. Palm, 2004 .

Erbium Doped Silicon for Light Emitting Devices

Jurgen Michel, Lionel C. Kimerling, J. Palm, 1996 .

Impact of UV-induced ozone and low-energy Ar+-ion cleaning on the chemical structure of Cu(In,Ga)(S,Se)2 absorber surfaces

Wanli Yang, L. Weinhardt, T. Niesen, 2020, Journal of Applied Physics.

Impact of environmental conditions on the chemical surface properties of Cu(In,Ga)(S,Se) 2 thin-film solar cell absorbers

R. Dietmüller, L. Weinhardt, C. Heske, 2014 .

Performance ratio study based on a device simulation of a 2D monolithic interconnected Cu(In,Ga)(Se,S)2 solar cell

J. Parisi, C. Schubbert, P. Eraerds, 2016 .

Nonradiative energy back transfer from erbium in silicon by impurity Auger process

Lionel C. Kimerling, J. Palm, F. Gan, 1996, Other Conferences.

Anomalous temperature dependence of the open‐circuit voltage of In x S y ‐buffered Cu(In,Ga)(Se,S) 2 solar cells simulated in broad temperature range

J. Parisi, C. Schubbert, P. Eraerds, 2016 .

Simulation study of the impact of interface roughness and void inclusions on Cu(In,Ga)(Se,S)2 solar cells

J. Parisi, C. Schubbert, P. Eraerds, 2015 .

The Formation of CuIn(S,Se)2 Thin Film Solar Cell Absorbers from Electroplated Precursors

R. Hock, J. Schulze, F. Hergert, 2007 .

Sulfo-selenization of metallic thin films of Cu, In and Cu–In

R. Hock, A. Jäger, S. Jost, 2009 .

The influence of gallium on phase transitions during the crystallisation of thin film absorber materials Cu(In,Ga)(S,Se)2 investigated by in-situ X-ray diffraction

R. Hock, S. Jost, A. Hölzing, 2011 .

Real-time Investigations on the Formation of CuIn(S,Se)2 while annealing precursors with varying sulfur content

R. Hock, S. Jost, A. Hölzing, 2009 .