S. Cheng

发表

Improvement of the common elastic-plastic FEM and hybrid/mixed quasi-secant modulus method

P. Hu, Yongbin Liu, S. Cheng, 1992 .

On the Stress Distribution in Laminae

S. Cheng, D. Chen, D. Chen, 1988 .

The experimental determination of the stress responses of an Al/Mg alloy to a polygonal strain path after three levels of prestraining

S. Cheng, E. Krempl, 1993 .

Modelling of flow stress of dual phase steel under warm tensile deformation

Wei Chen, M. Wu, S. Cheng, 2011 .

The rate-dependent mechanical behavior of modified 9wt.%Cr-1wt.%Mo steel at 538 °C

S. Cheng, M. Ruggles, E. Krempl, 1994 .

Analysis of Composite Materials: A Micromechanical Approach

S. Cheng, D. Chen, S. Cheng, 1993 .

Analysis of Orthotropic Beams.

S. Cheng, J. Liu, 1979 .

Stability of Heterogeneous Aeolotropic Cylindrical Shells Under Combined Loading

B. Ho, S. Cheng, S. Cheng, 1963 .

Elastic buckling of composite cylindrical shells under torsion.

D. S. Chehil, S. Cheng, S. Cheng, 1968 .

SOME PROBLEMS IN STABILITY OF HETEROGENEOUS AEOLOTROPIC CYLINDRICAL SHELLS UNDER COMBINED LOADING

B. Ho, S. Cheng, S. Cheng, 1963 .

Penultimate Approximation for Hill's

S. Cheng, 2001 .

A Macro–Micro Damage Model for Rock under Compression Loading

Y. Zeng, Xi Chen, S. Cheng, 2021, Applied Sciences.

Torsional stress in tubular lap joints

D. Chen, S. Cheng, S. Cheng, 1992 .

Non-linear analysis of prestretched circular membrane and a modified iteration technique

S. Cheng, D. Chen, S. Cheng, 1996 .

Analysis of Adhesive-Bonded Cylindrical Lap Joints Subjected to Axial Load

Y. Shi, S. Cheng, S. Cheng, 1993 .

STRESS DISTRIBUTION AND DEFORMATION OF ADHESIVE-BONDED LAMINATED COMPOSITE BEAMS

T. Jiang, S. Cheng, X. Wei, 1989 .