B. Drach

发表

Identification of process-induced residual stresses in 3D woven carbon/epoxy composites by combination of FEA and blind hole drilling

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2020 .

Elastic deformation of composite cylinders with cylindrically orthotropic layers

Igor Tsukrov, Borys Drach, I. Tsukrov, 2010 .

Effective elastic properties of composites with particles of polyhedral shapes

I. Sevostianov, B. Drach, A. Trofimov, 2017 .

Comparison of stress-based failure criteria for prediction of curing induced damage in 3D woven composites

T. Gross, I. Tsukrov, A. Drach, 2018 .

Viscoelasticity and plasticity mechanisms of human dentin

K. N. Mikaelyan, I. Sevostianov, M. Gutkin, 2018 .

Measuring Failure Stress of RTM6 Epoxy Resin under Purely Hydrostatic Tensile Stress using Constrained Tube Method

H. Bayraktar, T. Gross, I. Tsukrov, 2016, Experimental Techniques.

Applicability of two-step homogenization to high-crimp woven composites

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2019, Composite Structures.

Effective conductivity of materials with continuous curved fibers

B. Drach, Dmytro Kuksenko, 2017 .

Characterization and statistical modeling of irregular porosity in carbon/carbon composites based on X‐ray microtomography data

I. Tsukrov, A. Drach, B. Drach, 2013 .

Stochastic approach to micromechanical modeling of porous solids

I. Tsukrov, A. Drach, B. Drach, 2013 .

Material properties of anisotropic materials with pores

R. Piat, I. Tsukrov, B. Drach, 2011 .

Micromechanical Modeling of Heterogeneous Materials with Irregularly Shaped Pores

I. Tsukrov, B. Drach, 2011 .

EFFECTIVE ELASTIC PARAMETERS OF CARBON/CARBON COMPOSITES WITH NON-ELLIPSOIDAL PORES

R. Piat, I. Tsukrov, B. Drach, 2011 .

Prediction of the effective elastic moduli of materials with irregularly-shaped pores based on the pore projected areas

I. Tsukrov, A. Drach, B. Drach, 2014 .

Effect of a curved fiber on the overall material stiffness

I. Sevostianov, B. Drach, Dmytro Kuksenko, 2016 .

Evaluation of Process-Induced Residual Stresses in Orthogonal 3D Woven Composites via Nonlinear Finite Element Modeling Validated by Hole Drilling Experiments

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2022, Composite Structures.

Predicting the overall response of an orthogonal 3D woven composite using simulated and tomography-derived geometry

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2020 .

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models

I. Beyerlein, M. Knezevic, B. Drach, 2014 .

Effective stiffness and thermal expansion coefficients of unidirectional composites with fibers surrounded by cylindrically orthotropic matrix layers

T. Gross, I. Tsukrov, B. Drach, 2012 .

INFLUENCE OF ANISOTROPY OF PYROLYTIC CARBON ON EFFECTIVE PROPERTIES OF CARBON / CARBON COMPOSITES

T. Gross, I. Tsukrov, B. Drach, 2009 .

On micromechanical modeling of orthotropic solids with parallel cracks

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2018, International Journal of Solids and Structures.

Fraction-exponential representation of the viscoelastic properties of dentin.

I. Sevostianov, M. Gutkin, B. Drach, 2017, International journal of engineering science.

Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes

R. Piat, T. Böhlke, T. Gross, 2011 .

Micromechanical Modeling of Chemical Vapor Inltrated Carbon/Carbon Composites

I. Tsukrov, B. Drach, 2010 .

Comparison of full field and single pore approaches to homogenization of linearly elastic materials with pores of regular and irregular shapes

I. Tsukrov, B. Drach, A. Trofimov, 2016 .

Comparison of Full Field and Single Inclusion Approaches to Homogenization of Composites with Non-Ellipsoidal Pores

I. Tsukrov, B. Drach, A. Trofimov, 2014 .

Effective elastic moduli of a heterogeneous oolitic rock containing 3-D irregularly shaped pores

I. Sevostianov, A. Giraud, B. Drach, 2017 .

Processing of fiber architecture data for finite element modeling of 3D woven composites

Andrew Drach, Igor Tsukrov, Borys Drach, 2014, Adv. Eng. Softw..

Effect of micromechanical parameters of composites with wavy fibers on their effective response under large deformations

Dmytro Kuksenko, Helmut J. Böhm, Borys Drach, 2018, Adv. Eng. Softw..

On the effect of interactions of inhomogeneities on the overall elastic and conductive properties

Mark Kachanov, Igor Sevostianov, Borys Drach, 2014 .

Elasticity and material anisotropy of lamellar cortical bone in adult bovine tibia characterized via AFM nanoindentation.

I. Sevostianov, B. Drach, Thomas Cisneros, 2023, Journal of the mechanical behavior of biomedical materials.

Effective Elastic Moduli of Materials with Irregularly Shaped Pores Characterized by Micro-Computed Tomography

A. Wanner, R. Piat, T. Böhlke, 2010 .

Effect of Unit Cell Geometry and Fiber Waviness on the Overall Mechanical Response of 3D Woven Composites

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2019, American Society for Composites 2019.

Finite element models of 3D woven composites based on numerically generated micro-geometry of reinforcement

Y. Lapusta, I. Tsukrov, A. Drach, 2014 .

A Novel Small-Specimen Planar Biaxial Testing System With Full In-Plane Deformation Control.

Michael S Sacks, Yuan Feng, Samuel Potter, 2018, Journal of biomechanical engineering.

Effect of a partial contact between the crack faces on its contribution to overall material compliance and resistivity

I. Sevostianov, M. Kachanov, B. Drach, 2017 .