Mathias Röllig

发表

Development of Reference Test CFRP Specimens for the Standardisation of Active Thermography with Flash Excitation

M. Reischel, Henrik Steinfurth, Mathias Röllig, 2012 .

Quantitative impulse-thermography as non-destructive testing method in civil engineering - Experimental results and numerical simulations

Herbert Wiggenhauser, Christiane Maierhofer, Mathias Röllig, 2005 .

Characterisation of historic façades using active thermography with solar heating and optical methods

Rüdiger Mecke, Sven Augustin, M. Schiller, 2016 .

Inspecting defective rotor blades by thermographic monitoring from greater distances: A review on results of the three-year project IKARUS

Mathias Röllig, Rainer Krankenhagen, Tamara Worzewski, 2015 .

Einfluss thermischer und optischer Materialeigenschaften auf die Charakterisierung von Fehlstellen in Faserverbundwerkstoffen mit aktiven Thermografieverfahren

Christiane Maierhofer, Mathias Röllig, Rainer Krankenhagen, 2018 .

Thermographic rotor blade inspection from larger distances – a promising tool for the maintenance of wind turbines

Mathias Röllig, Rainer Krankenhagen, Tamara Worzewski, 2016 .

Detection and Characterization of Defects in Isotropic and Anisotropic Structures Using Lockin Thermography

Christiane Maierhofer, Henrik Steinfurth, Mathias Röllig, 2015, J. Imaging.

On-site inspection of potential defects in wind turbine rotor blades with thermography

Mathias Röllig, Rainer Krankenhagen, Tamara Worzewski, 2016 .

Development and Application of Active Thermography for Monitoring of Deterioration Processes of Historic Structures

Christiane Maierhofer, Mathias Röllig, Rainer Krankenhagen, 2013 .

Investigating historic masonry structures with a combination of active thermography and 3D laser scanner

M. Schiller, Mathias Röllig, Rainer Krankenhagen, 2011 .

Integration of active thermography into the assessment of cultural heritage buildings

Christiane Maierhofer, Mathias Röllig, Rainer Krankenhagen, 2010 .

Detection of shallow voids in concrete structures with impulse thermography and radar

Herbert Wiggenhauser, Mathias Röllig, A. Brink, 2003 .

Quantification of impact damages in CFRP and GFRP structures with thermography and ultrasonics

Thomas Heckel, Christiane Maierhofer, Mathias Röllig, 2018 .

Intestigation of concrete structures with pulse phase thermography

Herbert Wiggenhauser, Ralf Arndt, Christiane Maierhofer, 2005 .

Validation of flash thermography using computed tomography for characterizing inhomogeneities and defects in CFRP structures

Dietmar Meinel, Christiane Maierhofer, Mathias Röllig, 2014 .

Active thermography for evaluation of reinforced concrete structures

Christiane Maierhofer, Mathias Röllig, Joachim Schlichting, 2010 .

Application of quantitative impulse thermography for structural evaluation in civil engineering – Comparison of experimental results and numerical simulations

Herbert Wiggenhauser, Mathias Röllig, A. Brink, 2002 .

Transient thermography for structural investigation of concrete and composites in the near surface region

Herbert Wiggenhauser, Mathias Röllig, A. Brink, 2002 .

Quantitative numerical analysis of transient IR-experiments on buildings

Herbert Wiggenhauser, Mathias Röllig, A. Brink, 2004 .

Fast Defect Shape Reconstruction Based on the Travel Time in Pulse Thermography

Sebastian Götschel, Martin Weiser, Christiane Maierhofer, 2013 .

Warming up for mechanosynthesis - temperature development in ball mills during synthesis.

Christiane Maierhofer, Mathias Röllig, C. Maierhofer, 2017, Chemical communications.

Influence of concrete properties on the detection of voids with impulse-thermography

Ralf Arndt, Mathias Röllig, C. Maierhofer, 2007 .

Non-destructive testing of Cu solder connections using active thermography

Christian Scheuerlein, Christiane Maierhofer, Henrik Steinfurth, 2012 .

Comparison of quantitative defect characterization using pulse-phase and lock-in thermography.

Christiane Maierhofer, Mathias Röllig, Philipp Myrach, 2016, Applied optics.

Application of impulse-thermography for non-destructive assessment of concrete structures

Bernd Hillemeier, Ralf Arndt, Mathias Röllig, 2006 .

Applicability of a 1D Analytical Model for Pulse Thermography of Laterally Heterogeneous Semitransparent Materials

Christiane Maierhofer, Mathias Röllig, Simon J. Altenburg, 2018 .

Development and test of a numerical model for pulse thermography in civil engineering

Ralf Arndt, Martin Weiser, Mathias Röllig, 2010 .

LEDs for thermographic NDT: status and chances

Christiane Maierhofer, Henrik Steinfurth, Mathias Röllig, 2014 .