V. F. Terent’ev

发表

Structural changes in metastable austenitic steel during equal channel angular pressing and subsequent cyclic deformation

W. Skrotzki, A. Belyakov, S. Dobatkin, 2018 .

On the problem of plotting full fatigue curves. II

V. F. Terent’ev, M. Bílý, 1972 .

Effect of hydrogen on cyclic strength of Ti−Al−Zr alloy

V. M. Goritskii, V. F. Terent’ev, L. Gerasimova, 1975 .

The problem of strain aging in the process of cyclic loading

V. M. Goritskii, V. Ivanova, V. F. Terent’ev, 1973 .

Effect of rhenium coatings on the mechanical properties of molybdenum wires

V. F. Terent’ev, A. Kolmakov, G. Vstovsky, 1995 .

Determination of Hardness and Other Mechanical Properties of Thin-Sheet TRIP Steel by Indenting

V. F. Terent’ev, V. Matyunin, A. Marchenkov, 2018, Inorganic Materials.

Fatigue resistance of titanium and iron alloys with submicrocrystalline and nanocrystalline structure. A review

V. F. Terent’ev, 2007 .

Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting

O. Antonova, V. F. Terent’ev, D. Prosvirnin, 2016, Russian Metallurgy (Metally).

TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates

V. F. Terent’ev, D. Prosvirnin, A. K. Slizov, 2016, Russian Metallurgy (Metally).

The effect of nitriding on fatigue strength of structural alloys

S. ., V. F. Terent’ev, A. Kolmakov, 2007 .

On the Problem of the Fatigue Limit of Metallic Materials

V. F. Terent’ev, 2004 .

The influence of ultrafine-grained structure on the mechanical properties and biocompatibility of austenitic stainless steels.

A. Belyakov, S. Dobatkin, O. Rybalchenko, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Fatigue strength of a magnesium MA2-1 alloy after equal-channel angular pressing

V. Serebryany, S. Dobatkin, V. Kopylov, 2010 .

Static and cyclic strength of austenitic corrosion-resistant cast Cr-Ni-Mn-Mo-N steel

M. Kostina, V. F. Terent’ev, D. V. Prosvirin, 2015, Russian Metallurgy (Metally).

Fatigue strength of high-alloy corrosion-resistant TRIP steels (review)

V. F. Terent’ev, S. Korableva, 2013, Russian Metallurgy (Metally).

Dislocational structure of iron at the tip of a fatigue crack

V. M. Goritskii, V. Ivanova, V. F. Terent’ev, 1975 .

Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel

V. Sirotinkin, É. Eliseev, A. S. Baikin, 2017, Russian Metallurgy (Metally).

Cyclic strength of corrosion-resistant high-nitrogen austenitic 05Kh22AG15N8MF steel during repeated tension

V. M. Blinov, V. F. Terent’ev, D. Prosvirnin, 2012, Russian Metallurgy (Metally).

Cyclic strength of an austenitic corrosion-resistant steel with a high nitrogen content

V. M. Blinov, V. F. Terent’ev, A. Kolmakov, 2010 .

Fractography of static and fatigue fracture in molybdenum and its alloys

V. F. Terent’ev, I. S. Kogan, 1978 .

Fatigue characteristics of auto body sheet steels

O. N. Baklanova, V. F. Terent’ev, D. Prosvirnin, 2014, Russian Metallurgy (Metally).

Mechanical Properties and Structure of a VNS9-Sh Steel as Functions of the Tempering Temperature

A. Ashmarin, V. M. Blinov, V. F. Terent’ev, 2019, Russian metallurgy. Metally.

Effect of the removal of the surface layer of a TRIP steel sheet on its phase composition after static tension at various strain rates

V. Sirotinkin, É. Eliseev, A. Ashmarin, 2016, Russian metallurgy. Metally.

Structure and fatigue properties of 08Kh18N10T steel after equal-channel angular pressing and heating

W. Skrotzki, S. Dobatkin, O. Rybalchenko, 2012, Russian Metallurgy (Metally).

The development of fatigue cracks in armco iron at low temperatures

V. M. Goritskii, V. F. Terent’ev, L. G. Orlov, 1975 .

Fatigue strength and fatigue-fracture fractography of a chromium alloy of the Cr-V-B-Y system at temperatures of 20°C and 1100°C

Yu. K. Shtovba, V. F. Terent’ev, E. A. Voitekhova, 1978 .

Low-cycle fatigue of a VZh175 high-temperature alloy under elastoplastic deformation conditions

M. A. Gorbovets, V. F. Terent’ev, M. Gol’dberg, 2015, Russian Metallurgy (Metally).

Endurance limit of metals and alloys

V. F. Terent’ev, 2008 .

Cyclic strength of submicrocrystalline nickel obtained by nanopowder sintering

V. F. Terent’ev, D. Prosvirnin, A. Kolmakov, 2008 .

Effect of Electrolytic-Plasma Polishing on the Mechanical Properties of Austenitic–Martensitic VNS9-Sh TRIP Steel

V. Sirotinkin, V. F. Terent’ev, D. Prosvirnin, 2020, Russian Metallurgy (Metally).

Structure and Mechanical Properties of High-Strength Austenitic-Martensitic Trip-Steel VNS9-Sh

V. F. Terent’ev, P. Kusakin, 2019, Metal Science and Heat Treatment.

X-Ray diffraction study of the change in the structure of a VNS9-III TRIP sheet steel after static tension

V. Sirotinkin, V. F. Terent’ev, D. Prosvirnin, 2015, Russian Metallurgy (Metally).

Plastic deformation of a BCC metal in the microyield region

V. F. Terent’ev, L. G. Orlov, V. N. Poida, 1972 .

Mechanical properties of a nitrogen-bearing austenitic steel during static and cycle deformation

V. F. Terent’ev, D. Prosvirnin, E. Blinov, 2016, Russian Metallurgy (Metally).

Effect of the Surface Condition of Metallic Wires on Their Mechanical Properties

V. F. Terent’ev, A. Kolmakov, V. Gerov, 2002 .

Effect of equal-channel angular pressing on the fatigue strength of titanium and a zirconium alloy

S. Nikulin, S. Dobatkin, V. Kopylov, 2011 .

Acoustic emission analysis of the stages of deformation of TRIP steel

V. Sirotinkin, V. F. Terent’ev, V. V. Roshchupkin, 2017, Russian Metallurgy (Metally).

The construction of the complete fatigue curve. 3

V. F. Terent’ev, M. Bílý, 1973 .

Mechanical Properties of VNS9-Sh TRIP Steel at Various Test Temperatures

V. Stolyarov, V. Sirotinkin, V. F. Terent’ev, 2020, Russian metallurgy. Metally.