J. Ibáñez

发表

Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties

Pilar Marín, M. Multigner, Silvia Ferreira-Barragáns, 2010 .

Contribution of Cations and Anions of Aqueous Electrolytes to the Charge Stored at the Electric Electrolyte/Electrode Interface of Carbon-Based Supercapacitors

J. M. Rojo, V. Barranco, J. Ibáñez, 2017 .

A Procedure for Evaluating the Capacity Associated with Battery-Type Electrode and Supercapacitor-Type One in Composite Electrodes

J. Amarilla, J. M. Rojo, V. Barranco, 2018 .

Composite Electrodes Made from Carbon Cloth as Supercapacitor Material and Manganese and Cobalt Oxide as Battery One

J. M. Rojo, V. Barranco, T. Centeno, 2016 .

Understanding RuO2·xH2O/carbon nanofibre composites as supercapacitor electrodes

J. Amarilla, R. Rojas, J. M. Rojo, 2008 .

Amorphous carbon nanofibres inducing high specific capacitance of deposited hydrous ruthenium oxide

J. Amarilla, A. Ōya, R. Rojas, 2009 .

Correlation between capacitance and porosity in microporous carbon monoliths

J. M. Rojo, V. Barranco, T. Centeno, 2014 .

The contribution of sulfate ions and protons to the specific capacitance of microporous carbon monoliths

J. M. Rojo, V. Barranco, Á. Linares-Solano, 2014 .

Electrochemical study of tetraalkylammonium tetrafluoroborate electrolytes in combination with microporous and mesoporous carbon monoliths

J. M. Rojo, I. Llorente, S. Perez-Ferreras, 2018 .

LiMn2O4-based composites processed by a chemical-route: Microstructural, electrical, electrochemical, and mechanical characterization

J. Amarilla, J. M. Rojo, S. Mandal, 2003 .

Matrix grain characterisation by electron backscattering diffraction of powder metallurgy aluminum matrix composites reinforced with MoSi2 intermetallic particles

M. Lieblich, J. Ibáñez, P. Hidalgo, 2010 .

Influence of the sandblasting on the subsurface microstructure of 316LVM stainless steel: Implications on the magnetic and mechanical properties

J. Jiménez, M. Multigner, P. Marín, 2009 .

In-situ SEM Observation of Microstructural Evolution of High Purity Aluminum Deformed at Elevated Temperatures

G. González-Doncel, J. Ibáñez, J. Castellano, 1996 .

The effect of ball milling on the microstructure of powder metallurgy aluminium matrix composites reinforced with MoSi2 intermetallic particles

M. Lieblich, J. Ibáñez, J. Corrochano, 2011 .

Prediction of superplastic behavior from high strain rate tests

F. Peñalba, M. Carsí, G. González-Doncel, 1994 .

Dry sliding wear behaviour of powder metallurgy Al–Mg–Si alloy-MoSi2 composites and the relationship with the microstructure

W. M. Rainforth, M. Lieblich, J. Ibáñez, 2011 .

Serrated yielding in rapidly solidified Ni-20Al-12Cr-1.8Mo intermetallic alloy ribbons

G. González-Doncel, P. Adeva, J. Ibáñez, 1992 .

Extrusion of Ingot and Powder Metallurgy Aluminum Matrix Composites Profiles

M. Lieblich, G. González-Doncel, J. Ibáñez, 2012 .

Influence of extrusion temperature on the microstructure and the texture of 6061Al–15 vol.% SiCw PM composites

Gaspar González-Doncel, Ricardo Fernández, A. Borrego, 2002 .

Development of new cement based matrices for safe disposal of hazardous metals: cadmium and caesium

S. Goñi, J. A. Ibáñez, J. Ibáñez, 2013 .

Improvement of initial mechanical strength by nanoalumina in belite cements

Ana Guerrero, Jorge S. Dolado, J. Dolado, 2007 .

Effects of the alumina scale on the room-temperature tensile behavior of preoxidized MA 956

G. González-Doncel, J. Chao, J. L. González-carrasco, 1996 .

Mechanical properties of some PM aluminide and silicide reinforced 2124 aluminium matrix composites

M. Lieblich, B. Torres, J. Ibáñez, 2002 .

Interfacial reactions between the aluminium alloy matrix and intermetallic reinforcement particles in novel P/M 5056/Ni3Alp composites

M. Lieblich, B. Torres, Y. Wang, 2001 .

Lüders bands formation in a rapidly solidified Ni3al alloy ribbon

G. González-Doncel, P. Adeva, J. Ibáñez, 1995 .

Understanding the rate performance of microporous carbons in aqueous electrolytes

J. M. Rojo, M. Lillo-Ródenas, J. Ibáñez, 2020 .

New Carbon Monoliths for Supercapacitor Electrodes. Looking at the Double Layer.

J. M. Rojo, M. Lillo-Ródenas, J. Ibáñez, 2017 .

In-situ SEM observation of tensile deformation in rapidly solidified Ni3Al ribbons

P. Pérez, P. Adeva, J. Ibáñez, 1997 .

A multi-scale analysis of the residual stresses developed in a single-phase alloy cylinder after quenching

G. González-Doncel, S. Ferreira-Barragáns, J. Ibáñez, 2018 .

The Role of Carbon Black in LiMn2O4-Based Composites as Cathodes for Rechargeable Lithium Batteries

J. Amarilla, J. M. Rojo, S. Mandal, 2001 .

Ruthenium oxide/carbon composites with microporous or mesoporous carbon as support and prepared by two procedures. A comparative study as supercapacitor electrodes

J. Amarilla, R. Rojas, J. M. Rojo, 2009 .

Texture Evolution of the Tetragonal Al3CaZn Phase in Al-5%Ca-5%Zn Superplastic Sheet Alloy after Annealing and Deformation

M. Pérez-Prado, O. Ruano, G. González-Doncel, 1999 .

Microstructure and mechanical properties of rapidly solidified AI‐3Cr‐0.3Mo alloys

J. Ibáñez, A. G. Escorial, M. Cristina, 1992 .

RuO2·xH2O/NiO composites as electrodes for electrochemical capacitors: Effect of the RuO2 content and the thermal treatment on the specific capacitance

J. Amarilla, R. Rojas, J. M. Rojo, 2006 .

Amorphous Carbon Nanofibers and Their Activated Carbon Nanofibers as Supercapacitor Electrodes

J. Amarilla, A. Ōya, J. M. Rojo, 2010 .

Activated Carbon Fiber Monoliths as Supercapacitor Electrodes

J. M. Rojo, J. Ibáñez, M. Kunowsky, 2017 .

On the aggregation process of ceramic LiSn2P3O12 particles embedded in Teflon matrix

J. M. Rojo, J. Ibáñez, M. Tabellout, 2004 .

Microstructure and Ionic Conductivity of LiSn2 P 3 O 12-Teflon Composites

R. Jiménez, J. M. Rojo, P. Durán-martín, 2001 .

Effect of the phase transition of on the ion conduction in - Teflon composites

R. Jiménez, J. M. Rojo, P. Durán-martín, 1997 .

Influence of extrusion temperature on the aging behavior of 6061Al-15vol%SiCw composites

A. Borrego, M. Lieblich, G. González-Doncel, 1996 .

Subsurface modifications in powder metallurgy aluminium alloy composites reinforced with intermetallic MoSi2 particles under dry sliding wear

M. Lieblich, W. Rainforth, V. Vadillo, 2014 .

Dense carbon monoliths for supercapacitors with outstanding volumetric capacitances

J. D. Carruthers, J. M. Rojo, V. Barranco, 2014 .

Friction stir welding of 25%SiC/2124Al composite with optimal mechanical properties and minimal tool wear

G. González-Doncel, J. Ibáñez, R. Fernández, 2017 .

On the role of matrix grain size and particulate reinforcement on the hardness of powder metallurgy Al–Mg–Si/MoSi2 composites

M. Lieblich, J. Ibáñez, J. Corrochano, 2009 .

Determination of fiber length in axially symmetrical metal matrix composites

A. Borrego, G. González-Doncel, J. Ibáñez, 2008 .