N. Yamamoto

发表

Fatigue Behavior of Cold-Worked 304 Stainless Steels under In-Situ Irradiation at 300°C

Y. Murase, J. Nagakawa, N. Yamamoto, 2008 .

In situ deformation of proton-irradiated molybdenum in a high-voltage electron microscope

A. Sato, H. Shiraishi, N. Yamamoto, 1991 .

Ni cermet solid oxide fuel cell anodes prepared from nanoparticle Y2O3―CeO2―ZrO2 solid solutions

W. Ueda, T. Takeguchi, N. Yamamoto, 2011 .

Effect of interaction between Ni and YSZ on coke deposition during steam reforming of methane on Ni/YSZ anode catalysts for an IR-SOFC

W. Ueda, T. Takeguchi, N. Yamamoto, 2011 .

Microstructural observation of helium implanted and creep ruptured Fe–25%Ni–15%Cr alloys containing various MC and MN formers

H. Shiraishi, Y. Murase, J. Nagakawa, 1998 .

Correlation between embrittlement and bubble microstructure in helium-implanted materials

Y. Murase, J. Nagakawa, N. Yamamoto, 2004 .

In-beam fatigue behavior of F82H steel at 500 °C

Y. Murase, J. Nagakawa, N. Yamamoto, 2004 .

Solubilities and dissolution states of a series of symmetrical tetraalkylammonium salts in Water.

H. Matsui, N. Yamamoto, H. Nakayama, 1989 .

In situ deformation and unfaulting of interstitial loops in proton-irradiated steels

Takehiko Mori, A. Sato, H. Shiraishi, 1992 .

Selective Dissolution of Delta Ferrite Phase in Welded 308 Stainless Steel under Proton Irradiation

Y. Murase, N. Yamamoto, H. Katayama, 2017 .

In-Beam Stress Corrosion Behavior of Welded 308 Stainless Steel at 473 K in Aerated and Hydrogenated Water Conditions

T. Shinohara, Akira Tahara, K. Kimura, 2015 .

In-Beam Stress Corrosion Tests for Welded 308 Stainless Steel in Pure Water at 473 K

T. Shinohara, Akira Tahara, K. Kimura, 2014 .

Helium bubble microstructure in SS 316L, 20% c.w. and its correlation to the in-beam mechanical properties

H. Schroeder, N. Yamamoto, 1991 .

The effect of MC and MN stabilizer additions on the creep rupture properties of helium implanted Fe-25% Ni-15% Cr austenitic alloy

H. Shiraishi, J. Nagakawa, N. Yamamoto, 1995 .

Void Swelling of Proton Irradiated Fe-15Cr-20Ni Ternary Alloy

A. Hasegawa, H. Shiraishi, Y. Murase, 1996 .

Creep rupture properties of helium implanted V–4Cr–4Ti alloy NIFS-HEAT-2

Y. Murase, J. Nagakawa, N. Yamamoto, 2004 .

Effects of small amount of additional elements on control of interstitial impurities and mechanical properties of V–4Cr–4Ti–Si–Al–Y alloys

T. Muroga, A. Hasegawa, K. Abe, 2004 .

Effect of helium implantation at 533 573 K on tensile properties of 9Cr martensitic steels

A. Hasegawa, H. Shiraishi, N. Yamamoto, 1993 .

High Temperature Tensile Properties of 316 Stainless Steel Implanted with Helium

A. Hasegawa, H. Shiraishi, N. Yamamoto, 1993 .

Effect of cold work on void swelling in proton irradiated Fe–15Cr–20Ni ternary alloys

H. Shiraishi, Y. Murase, J. Nagakawa, 1998 .

Void swelling in Fe–15Cr–xNi ternary alloys under proton irradiation

H. Shiraishi, Y. Murase, J. Nagakawa, 1998 .

Void Swelling in Proton Irradiated Fe-Cr-Ni Ternary Alloys

H. Shiraishi, Y. Murase, J. Nagakawa, 1997 .

Creep behavior of 8Cr2WVTa martensitic steel designed for fusion DEMO reactor (an assessment on helium embrittlement resistance)

K. Shiba, Y. Murase, J. Nagakawa, 2002 .

Effects of helium implantation on creep rupture properties of low activation ferritic steel F82H IEA heat

K. Shiba, J. Nagakawa, N. Yamamoto, 2000 .

An Evaluation on Helium-Embrittlement-Resistance of Low Activation Ferritic/Martensitic Steel F82H

K. Shiba, J. Nagakawa, N. Yamamoto, 1999 .

Helium embrittlement of Ti and P added austenitic alloys crept at 923 K

H. Shiraishi, Y. Murase, J. Nagakawa, 1998 .

In-beam creep rupture properties of cold-worked DIN 1.4970 and AISI 316 L at 873 K

H. Schroeder, N. Yamamoto, 1988 .

Creep rupture properties of helium implanted γ precipitation strengthened alloy

H. Shiraishi, H. Kamitsubo, J. Nagakawa, 1991 .

Helium embrittlement in Fe-Ni-Cr austenitic alloys and ferritic MA 956 alloy

A. Hasegawa, H. Shiraishi, N. Yamamoto, 1989 .

In situ deformation of proton-irradiated metals

A. Sato, H. Shiraishi, N. Yamamoto, 1991 .

Effects of implanted he on the fatigue life of mc stabilized Fe-25%Ni-15%Cr alloy

H. Ullmaier, K. Furuya, H. Shiraishi, 1986 .

Irradiation-Induced Deformation in Cold-Worked SUS 304 Stainless Steel

Y. Murase, J. Nagakawa, N. Yamamoto, 2006 .

Creep behavior of the F82H steel under irradiation with 17 MeV protons at 300 °C

K. Shiba, Y. Murase, J. Nagakawa, 2009 .

Effect of pre-injection thermo-mechanical treatment on helium embrittlement of Fe-(25–40)Ni-15Cr austenitic alloys

H. Shinno, H. Yoshida, H. Shiraishi, 1983 .

Irradiation creep of Fe25Ni15Cr during 10 MeV deuteron bombardment

H. Shiraishi, N. Yamamoto, N. Kishimoto, 1988 .

Effect of combined addition of Ti and P on creep rupture properties of helium implanted Fe-25%Ni-15%Cr alloy

H. Shiraishi, Y. Murase, J. Nagakawa, 1998 .

Plastic deformation of SUS304 under in situ and post-irradiation fatigue loadings

Y. Murase, J. Nagakawa, N. Yamamoto, 2007 .

In-beam fatigue behavior of 20% cold-worked 316 stainless steel at 300 °C

Y. Murase, N. Yamamoto, Johsei Nagakawa, 2006 .

Fracture surface topography analysis of in-beam fatigue behavior for 20% cold-worked 316 stainless steel

Y. Murase, J. Nagakawa, N. Yamamoto, 2003 .

Fatigue behavior of 20% cold-worked 316 stainless steel under in situ irradiation with 17 MeV protons at 60 °C

Y. Murase, J. Nagakawa, N. Yamamoto, 2002 .

Microstructural observation on helium injected and creep ruptured JPCA

A. Hishinuma, H. Shiraishi, N. Yamamoto, 1986 .

An evaluation of helium embrittlement resistance of reduced activation martensitic steels

Y. Murase, J. Nagakawa, N. Yamamoto, 2006 .

Creep properties of a reduced activation 9Cr3WVTaB martensitic steel after helium implantation

Y. Murase, J. Nagakawa, N. Yamamoto, 2004 .

Irradiation creep at 60°C in SUS 316 and its impact on fatigue fracture

Y. Murase, J. Nagakawa, N. Yamamoto, 2000 .

Computer simulation of early-stage irradiation creep

H. Shiraishi, J. Nagakawa, N. Yamamoto, 1991 .

Fatigue behavior of He-pre-injected 316 stainless steel under 17MeV proton irradiation

Y. Murase, N. Yamamoto, 2013 .

Effect of cold work on the irradiation creep of SUS 316L

Koichiro Ueno, Norikazu Yamamoto, Y. Murase, 2004 .

Fatigue Properties of Helium Injected F82H-IEA Heat Material

Y. Murase, J. Nagakawa, N. Yamamoto, 2009 .