C. Mineo

发表

Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system

Carmelo Mineo, Charles MacLeod, Stephen Pierce, 2020 .

Correction of B-scan distortion for optimum ultrasonic imaging of backwalls with complex geometries

S. Pierce, A. Gachagan, C. Macleod, 2020 .

Introducing a new method for efficient visualization of complex shape 3D ultrasonic phased-array C-scans

S. Pierce, C. Macleod, C. Mineo, 2017, 2017 IEEE International Ultrasonics Symposium (IUS).

Determination of Bubble Size Distribution Using Ultrasound Array Imaging

A. Nordon, A. Gachagan, A. Mulholland, 2020, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

(2017) Compressive sensing for direct time of flight estimation in ultrasound-based NDT. In: 11th International Workshop on Structural Health Monitoring, 2017-09-12 - 2017-09-14.

E. Cross, K. Worden, C. Mineo, 2018 .

Autonomous Ultrasound-based Inspection using Bayesian Optimisation and Robust Outlier Analysis

E. Cross, N. Dervilis, T. Rogers, 2018 .

Fine Alignment of Thermographic Images for Robotic Inspection of Parts with Complex Geometries

A. Pantano, D. Cerniglia, N. Montinaro, 2022, Sensors.

Siddiqi, Muftooh U. R. and Ijomah, Winifred L. and Dobie, Gordon I. and Hafeez, Muthair and Pierce, S. Gareth and Ion, William and Mineo, Carmelo and MacLeod, Charles N. (2018) Low cost three-dimensional virtual model construction for remanufacturing

S. Pierce, W. Ijomah, W. Ion, 2019 .

A cooperative mobile robot and manipulator system (Co-MRMS) for transport and lay-up of fibre plies in modern composite material manufacture

Erfu Yang, C. Mineo, Cuebong Wong, 2021, The International Journal of Advanced Manufacturing Technology.

A probabilistic compressive sensing framework with applications to ultrasound signal processing

Keith Worden, Carmelo Mineo, Stephen Pierce, 2019, Mechanical Systems and Signal Processing.

Novel algorithms for 3D surface point cloud boundary detection and edge reconstruction

Stephen Gareth Pierce, Rahul Summan, Carmelo Mineo, 2019, J. Comput. Des. Eng..

High-temperature in-process inspection followed by 96-h robotic inspection of intentionally manufactured hydrogen crack in multi-pass robotic welding

S. Pierce, A. Gachagan, Y. Javadi, 2021 .

Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing

Carmelo Mineo, Charles MacLeod, Stephen Pierce, 2020, Journal of Manufacturing Processes.

Low cost three-dimensional virtual model construction for remanufacturing industry

William Ion, Carmelo Mineo, Charles N. MacLeod, 2017, Journal of Remanufacturing.

Ultrasonic phased array inspection of a Wire + Arc Additive Manufactured (WAAM) sample with intentionally embedded defects

S. Pierce, A. Gachagan, Y. Javadi, 2019, Additive Manufacturing.

A New Probe Concept for Internal Pipework Inspection

Stephen Marshall, Gordon Dobie, Rahul Summan, 2017 .

Solving ultrasonic ray tracing in parts with multiple material layers through Root-Finding methods.

D. Cerniglia, E. Mohseni, C. Mineo, 2022, Ultrasonics.

Autonomous ultrasonic inspection using Bayesian optimisation and robust outlier analysis

Carmelo Mineo, Stephen Pierce, T. J. Rogers, 2020, Mechanical Systems and Signal Processing.

Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components

Rahul Summan, Carmelo Mineo, Danial Kahani, 2017 .

Fast ultrasonic phased array inspection of complex geometries delivered through robotic manipulators and high speed data acquisition instrumentation

Rahul Summan, Carmelo Mineo, Charles MacLeod, 2016, 2016 IEEE International Ultrasonics Symposium (IUS).

Machine learning at the interface of structural health monitoring and non-destructive evaluation

N. Dervilis, K. Worden, R. Fuentes, 2020, Philosophical Transactions of the Royal Society A.

Enhancing the Sound Absorption of Small-Scale 3-D Printed Acoustic Metamaterials Based on Helmholtz Resonators

Carmelo Mineo, Joseph C. Jackson, James F. C. Windmill, 2018, IEEE Sensors Journal.

On the Use of Two Emerging Laser-Based Flaw-Detection Techniques – Considerations and Practicalities

G. Epasto, D. Cerniglia, D. Vangi, 2023, SSRN Electronic Journal.

Mineo, Carmelo and Pierce, Stephen Gareth and Nicholson, Pascual Ian and Cooper, Ian (2017) Introducing a novel mesh following technique for approximation-free robotic tool

S. Pierce, P. Nicholson, C. Mineo, 2018 .

Introducing a novel mesh following technique for approximation-free robotic tool path trajectories

Stephen Gareth Pierce, Carmelo Mineo, Ian Cooper, 2017, J. Comput. Des. Eng..

Multi-aperture beamforming for automated large structure inspection using ultrasonic phased arrays

Stephen Pierce, Carmelo Mineo, Charles Norman MacLeod, 2019 .

Enabling robotic adaptive behaviour capabilities for new Industry 4.0 automated quality inspection paradigms

Carmelo Mineo, Charles MacLeod, Stephen Pierce, 2020, Insight - Non-Destructive Testing and Condition Monitoring.

Ultrasonic Phased Array Inspection of Wire + Arc Additive Manufacture Samples Using Conventional and Total Focusing Method Imaging Approaches

Stephen Pierce, Carmelo Mineo, Charles Norman MacLeod, 2019, Insight - Non-Destructive Testing and Condition Monitoring.

Robotic Non-Destructive Testing

Y. Javadi, C. Mineo, 2022, Sensors.

Generalised bisection method for optimum ultrasonic ray tracing and focusing in multi-layered structures.

Carmelo Mineo, Donatella Cerniglia, David Lines, 2020, Ultrasonics.

Modelling of Echo Amplitude Fidelity for Transducer Bandwidth and Tfm Pixel Resolution

Carmelo Mineo, Charles MacLeod, Gareth Pierce, 2020 .

A flexible robotic cell for in-process inspection of multi-pass welds

Carmelo Mineo, Charles MacLeod, Stephen Pierce, 2019 .

Intentional weld defect process: From manufacturing by robotic welding machine to inspection using TFM phased array

Carmelo Mineo, Charles Norman MacLeod, Stephen Pierce, 2019 .

Influence of laser beam profile on the generation of ultrasonic waves

A. Pantano, D. Cerniglia, C. Mineo, 2011 .

Robotic path planning for non-destructive testing – A custom MATLAB toolbox approach

Carmelo Mineo, Stephen Pierce, Ian Cooper, 2016 .

Assessing the accuracy of industrial robots through metrology for the enhancement of automated non-destructive testing

Stephen Gareth Pierce, Rahul Summan, Carmelo Mineo, 2016, 2016 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems (MFI).

Vision guided robotic inspection for parts in manufacturing and remanufacturing industry

Gordon Dobie, Aamir W. Khan, Carmelo Mineo, 2020 .

Computer-aided tool path generation for robotic non-destructive inspection

Carmelo Mineo, Stephen Pierce, Maxim Morozov, 2013 .

Autonomous 3D geometry reconstruction through robot-manipulated optical sensors

D. Cerniglia, B. Reitinger, C. Mineo, 2021, The International Journal of Advanced Manufacturing Technology.

A Novel Clustering-Based Algorithm for Solving Spatially Constrained Robotic Task Sequencing Problems

Dongbing Gu, Carmelo Mineo, Xiu-Tian Yan, 2020, IEEE/ASME Transactions on Mechatronics.

Machine Learning at the Interface of SHM and NDE

E. Cross, N. Dervilis, R. Fuentes, 2020 .

Numerical study for a new methodology of flaws detection in train axles.

C Mineo, D Cerniglia, A Pantano, 2014, Ultrasonics.