D. Gloaguen

发表

In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S

J. Kelleher, S. Kabra, W. Kockelmann, 2016 .

Influence of Morphological Texture on Stresses Analysis by X-Ray and Neutron Diffraction: Accounting for Extreme Morphologies

S. Fréour, Viwanou Hounkpati, D. Gloaguen, 2014 .

Influence of morphologic texture on stress analysis by X-ray and neutron diffraction in single-phase metallic materials

S. Fréour, Viwanou Hounkpati, D. Gloaguen, 2014, Journal of Materials Science.

Experimental Investigation of Allotropic Transformation of Cobalt: Influence of Temperature Cycle, Mechanical Loading and Starting Microstructure

N. Barrier, J. Fajoui, E. Hug, 2021, Metallurgical and Materials Transactions A.

External Reference Samples for Residual Stress Analysis by X-Ray Diffraction

J. Lebrun, F. Lefebvre, M. François, 2011 .

X-ray measurement of residual stresses and texture development during a rolling sequence of zirconium alloy cladding tubes – influence of plastic anisotropy on mechanical behaviour

J. Fajoui, D. Gloaguen, R. Guillén, 2010 .

Measurement and prediction of residual stresses and crystallographic texture development in rolled Zircaloy-4 plates: X-ray diffraction and the self-consistent model

D. Gloaguen, R. Guillén, E. Girard, 2007 .

Mesoscopic residual stresses of plastic origin in zirconium: interpretation of X-ray diffraction results

M. François, M. François, D. Gloaguen, 2004 .

Accounting for a distribution of morphologies and orientations in stresses analysis by X-ray and neutron diffraction: the Generalized Self-Consistent model

S. Fréour, Viwanou Hounkpati, D. Gloaguen, 2014 .

Application of inverse models and XRD analysis to the determination of Ti-17 β-phase coefficients of thermal expansion

M. François, S. Fréour, D. Gloaguen, 2006 .

Modelling and simulation of multi‐phase effects on X‐ray elasticity constants

M. François, S. Fréour, D. Gloaguen, 2003 .

Bauschinger Effect in an Austenitic Steel: Neutron Diffraction and a Multiscale Approach

J. Kelleher, W. Kockelmann, J. Fajoui, 2016, Metallurgical and Materials Transactions A.

New Modelling Approach for Micromechanical Modelling of the Elastoplastic Behaviour

J. Fajoui, F. Jacquemin, R. Elleuch, 2014 .

Experimental and Numerical Analysis of Mechanical Behaviour of AISI 316L Austenitic Stainless Steel: Two Level Homogenization – Neutron Diffraction

J. Kelleher, W. Kockelmann, J. Fajoui, 2014 .

Experimental and theoretical studies of intergranular strain in an alpha titanium alloy during plastic deformation

J. Fajoui, D. Gloaguen, V. Legrand, 2013 .

Micromechanical modelling of the elastoplastic behaviour of metallic material under strain-path changes

J. Fajoui, D. Gloaguen, R. Guillén, 2009 .

Multiscale hygroviscoelastic approach to predicting the internal stresses in composite materials

F. Jacquemin, D. Gloaguen, R. Guillén, 2010 .

Flow stress improvement of a nickel multicrystal by physical vapor thin film deposition to reduce surface effects

M. Richard-Plouet, P. Dubos, D. Gloaguen, 2022, Materials Letters: X.

Determination of single‐crystal elasticity constants in a cubic phase within a multiphase alloy: X‐ray diffraction measurements and inverse‐scale transition modelling

M. François, S. Fréour, M. François, 2005 .

Lattice strain development in an alpha titanium alloy studied using synchrotron and neutron diffraction

T. Buslaps, S. Kabra, W. Kockelmann, 2021, Materials Science and Engineering: A.

Investigation of Microstructure, Hardness and Residual Stresses of Wire and Arc Additive Manufactured 6061 Aluminium Alloy

E. Gautron, S. Cabeza, T. Pirling, 2022, SSRN Electronic Journal.

Evolution of internal stresses in rolled Zr702α

M. François, D. Gloaguen, J. Royer, 2002 .

Modelling of elastoplastic behaviour of metallic materials with a homogenization approach: a self-consistent model based on dislocation densities

J. Fajoui, D. Gloaguen, B. Girault, 2015, Acta Mechanica.

Modelling of elastoplastic behaviour of metallic materials with a homogenization approach: a self-consistent model based on dislocation densities

J. Fajoui, D. Gloaguen, B. Girault, 2015 .

Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements

François Edy, J. Rebelo Kornmeier, P. Dubos, 2019, Metallurgical and Materials Transactions A.

Intergranular Strain Evolution in Titanium During Tensile Loading: Neutron Diffraction and Polycrystalline Model

T. Pirling, W. Kockelmann, J. Fajoui, 2015, Metallurgical and Materials Transactions A.

Prediction of intragranular strains in metallic polycrystals with a two‐level homogenisation approach: Influence of dislocation microstructure on the mechanical behaviour

M. François, D. Gloaguen, 2006 .

Hygro-elastic Internal Stresses in Porous Composite Materials: A Multi-scale Analysis

F. Jacquemin, D. Gloaguen, R. Guillén, 2007 .

Hygro-elastic Internal Stresses in Porous Composite Materials: A Multi-scale Analysis

F. Jacquemin, D. Gloaguen, R. Guillén, 2007 .

Temperature effect on strain-induced phase transformation of cobalt

J. Kelleher, S. Kabra, J. Fajoui, 2020 .

Accounting for a Distribution of Morphologies and Orientations on Stresses Analysis by X-Ray and Neutron Diffraction: Normalized Self-Consistent Modeling

S. Fréour, Viwanou Hounkpati, D. Gloaguen, 2014 .

Residual stress fields analysis in rolled Zircaloy-4 plates: Grazing incidence diffraction and elastoplastic self-consistent model

J. Fajoui, D. Gloaguen, B. Girault, 2014 .

In situ lattice strains analysis in titanium during a uniaxial tensile test

J. Fajoui, D. Gloaguen, V. Klosek, 2016 .

Influence of Plastic Anisotropy and Strain path on strain-induced Phase Transformation of Cobalt

J. Fajoui, P. Dubos, D. Gloaguen, 2023, Metals and Materials International.

Electrochemical characteristics of NixN thin films deposited by DC and HiPIMS reactive magnetron sputtering

M. Richard-Plouet, D. Gloaguen, P. Jouan, 2019, Thin Solid Films.

In Situ Mechanical Behavior of Regenerating Rat Calvaria Bones Under Tensile Load via Synchrotron Diffraction Characterization

Baobao Chang, V. Geoffroy, M. Schwartzkopf, 2018, Residual Stresses 2018.

comparison between simplified models and experimental results

M. François, S. Fréour, D. Gloaguen, 2004 .

Examination of residual stresses and texture in zirconium alloy cladding tubes after a large plastic deformation: experimental and numerical study

D. Gloaguen, R. Guillén, E. Girard, 2008 .

Development of Intergranular Stresses in Zirconium Alloy Cladding Tubes: Experimental and Numerical Studies

D. Gloaguen, R. Guillén, E. Girard, 2006 .

Effect of Temperature on the Lattice Strain Evolution in a Textured Alpha Titanium: Neutron Diffraction and Modelling

S. Kabra, W. Kockelmann, J. Fajoui, 2023, JOM.

Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion

C. Colin, S. Kabra, W. Kockelmann, 2023, Metallurgical and Materials Transactions. A.

Investigation of residual stresses and modeling of tensile deformation in wire-arc additive manufactured 6061 aluminum alloy: Diffraction and elastoplastic self-consistent model

D. Gloaguen, M. Moya, B. Girault, 2023, Materials Science and Engineering: A.

Determination of the Macroscopic Elastic Constants of a Phase Embedded in a Multiphase Polycrystal-Application to the β-Phase of a Ti-17 Titanium Based Alloy

M. François, S. Fréour, D. Gloaguen, 2002 .