I. Baumann

发表

Influence of the handling parameters on residual stresses of HVOF-sprayed WC-12Co coatings

D. Biermann, W. Tillmann, S. Rausch, 2015 .

Internal Diameter Coating by Warm Spraying of Fine WC-12Co Powders (− 10 + 2 µm) with Very Short Spray Distances up to 10 mm

W. Tillmann, C. Schaak, L. Hagen, 2021, Journal of Thermal Spray Technology.

Thermally sprayed finestructured WC-12Co coatings finished by ball burnishing and grinding as an innovative approach to protect forming tools against wear

D. Biermann, A. Tekkaya, W. Tillmann, 2015 .

Influence of Direct Splat-Affecting Parameters on the Splat-Type Distribution, Porosity, and Density of Segmentation Cracks in Plasma-Sprayed YSZ Coatings

W. Tillmann, I. Baumann, O. Khalil, 2021, Journal of Thermal Spray Technology.

Influence of spray gun parameters on inflight particle's characteristics, the splat-type distribution, and microstructure of plasma-sprayed YSZ coatings

W. Tillmann, I. Baumann, O. Khalil, 2021 .

Statistical Comparison of Processing Different Powder Feedstock in an HVOF Thermal Spray Process

S. Kuhnt, W. Tillmann, I. Baumann, 2022, Journal of Thermal Spray Technology.

Wear‐protective cermet coatings for forming tools

W. Tillmann, E. Vogli, J. Nebel, 2010 .

Effect of the Spray Parameters on the Particle Behavior and the Coating Properties During ID Warm Spraying of Fine WC-12Co Powders (-10 + 2 μm)

S. Kuhnt, W. Tillmann, I. Baumann, 2021, Thermal Spray 2021: Proceedings from the International Thermal Spray Conference.

Influence of the HVOF Gas Composition on the Thermal Spraying of WC-Co Submicron Powders (−8 + 1 μm) to Produce Superfine Structured Cermet Coatings

W. Tillmann, E. Vogli, I. Baumann, 2008 .

Characterization of the Microstructure and Thermomechanical Properties of Invar 36 Coatings Deposited by HVOF and Cold Gas Processes

W. Tillmann, I. Baumann, O. Khalil, 2022, Journal of Thermal Spray Technology.

Characterization of the Microstructure and Thermomechanical Properties of Invar 36 Coatings Deposited by HVOF and Cold Gas Processes

W. Tillmann, I. Baumann, O. Khalil, 2022, Journal of Thermal Spray Technology.

Desirability-Based Multi-Criteria Optimization of HVOF Spray Experiments to Manufacture Fine Structured Wear-Resistant 75Cr3C2-25(NiCr20) Coatings

Claus Weihs, Wolfgang Tillmann, E. Vogli, 2010 .

Near-Net-Shape and Dense Wear Resistant Thermally Sprayed Coatings

W. Tillmann, I. Baumann, B. Krebs, 2008 .

Metallization of ceramic coatings: Effect of cold gas spray parameters and roughness of the ceramic substrate on metallic layer properties

W. Tillmann, I. Baumann, J. Zajączkowski, 2023, Surface and Coatings Technology.

Sliding and Rolling Wear Behavior of HVOF-Sprayed Coatings Derived from Conventional, Fine and Nanostructured WC-12Co Powders

Leif Hagen, Wolfgang Tillmann, L. Hagen, 2013, Journal of Thermal Spray Technology.

Aspects of Die Design for the Electromagnetic Sheet Metal Forming Process

M. Kleiner, W. Tillmann, E. Vogli, 2006 .

Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders

W. Tillmann, D. Stangier, M. Paulus, 2021 .

WC Decomposition Phenomena in ID-HVOF-Sprayed WC-CoCr Coatings Using Fine Powder Feedstock

W. Tillmann, M. Paulus, L. Hagen, 2022, Coatings.

Influence of the Spray Angle on the Properties of HVOF Sprayed WC–Co Coatings Using (−10 + 2 μm) Fine Powders

W. Tillmann, Iris-Aya Laemmerhirt, P. Hollingsworth, 2013, Journal of Thermal Spray Technology.

Qualification of the Low-pressure Cold Gas Spraying for the Additive Manufacturing of Copper–Nickel–Diamond Grinding Wheels

D. Biermann, W. Tillmann, I. Baumann, 2021, Journal of Thermal Spray Technology.

Desirability-Based Multi-Criteria Optimisation of HVOF Spray Experiments

C. Weihs, W. Tillmann, I. Baumann, 2010 .