P. Abachi

发表

INFLUENCE OF MECHANICAL TREATMENTS ON THE MECHANICAL PROPERTIES OF AA 5083 ALUMINUM ALLOY WELDED JOINTS

I. Sattarifar, P. Abachi, N. Taheri, 2008 .

Low-cost air-stable perovskite solar cells by incorporating inorganic materials

S. Martínez-Chapa, M. Mohammadi, P. Abachi, 2021, New Journal of Chemistry.

The correlation between fracture mechanics parameters and creep crack growth rate of Al 7050-T73651 at elevated temperature

K. Purazrang, P. Abachi, 2015 .

Microstructural characterization and dry sliding wear behavior of spark plasma sintered Cu-YSZ composites

K. Purazrang, P. Abachi, Jafar Mirazimi, 2016 .

Production and properties of Cu/TiO2 nano-composites

A. Moghanian, A. Sedghi, E. Sadeghi, 2017 .

Production and properties of Cu/Cr2O3 nano-composites

A. Moghanian, K. Purazrang, P. Abachi, 2012 .

Characterization of mechanically alloyed Fe100−xSix and Fe83.5Si13.5Nb3 nanocrystalline powders

A. Bahrami, P. Abachi, H. Madaah-Hosseini, 2008 .

Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications

P. Abachi, S. G. Shiri, K. Pourazarang, 2015 .

Microstructure and mechanical properties of WC–10Co cemented carbide containing VC or (Ta, Nb)C and fracture toughness evaluation using different models

A. Simchi, P. Abachi, A. Soleimanpour, 2012 .

Spark Plasma Sintering of Ultrafine YSZ Reinforced Cu Matrix Functionally Graded Composite

K. Purazrang, P. Abachi, Jafar Mirazimi, 2016, Acta Metallurgica Sinica (English Letters).

Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing

A. Kokabi, P. Abachi, M. Azizieh, 2011 .

Wear behaviour of in situ Cu–Al2O3 composites produced by internal oxidation of as cast alloys

K. Purazrang, P. Abachi, A. Soleimanpour, 2009 .

Comparison of experimental and analytical fracture toughness values of SiCP/QE22 Mg-alloy composites

K. Purazrang, P. Abachi, 2006 .

Mechanical behaviour of magnesium alloy MMCs produced by squeeze casting and powder metallurgical techniques

K. Kainer, K. Purazrang, P. Abachi, 1993 .

FABRICATION OF AZ31/Al2O3 NANOCOMPOSITES BY FRICTION STIR PROCESSING

A. Kokabi, H. Kim, P. Abachi, 2011 .

FABRICATION OF AZ31/Al 2 O 3 NANOCOMPOSITES BY FRICTION STIR PROCESSING

A. Kokabi, H. Kim, P. Abachi, 2011 .

iTHE EFFECT OF THERMAL CYCLING ON THE STIFFNESS AND DENSITY OF THE SHORT FIBER AL 2 O 3 / AZ 91 MG ALLOY COMPOSITE

K. Purazrang, P. Abachi, I. Hadi, 2004 .

Dry sliding wear behavior of SiCP/QE22 magnesium alloy matrix composites

A. Masoudi, K. Purazrang, P. Abachi, 2006 .

Investigation of the mechanical behaviour of magnesium composites

K. Kainer, K. Purazrang, P. Abachi, 1994 .

The role of powder preparation route on physical and mechanical properties of Cu-rGO bulk nanocomposites

P. Abachi, Negar Fahimi, 2021 .

Effect of cobalt replacement by nickel on functionally graded cemented carbonitrides

P. Abachi, M. Mohammadpour, M. Mohammadpour, 2012 .

Fracture Behavior Evaluation of High-Strength 7050 and 7075 Aluminum Alloys Using V-Notched Specimen

T. Coyle, K. Purazrang, P. Abachi, 2016 .

The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating

A. Dolati, P. Abachi, S. Khaleghpanah, 2017 .

Production of Cu-TiC Nanocomposite Using Mechanical Alloying Route

A. Rostami, K. Purazrang, P. Abachi, 2013 .

Structural and soft magnetic properties of nanocrystalline Fe85Si10Ni5 powders prepared by mechanical alloying

H. M. Hosseini, A. Bahrami, P. Abachi, 2006 .

Study of cemented carbonitrides with nickel as binder: Experimental investigations and computer calculations

K. Pourazrang, N. Parvin, P. Abachi, 2012 .

Additive manufacturing of PLA-Mg composite scaffolds for hard tissue engineering applications.

R. Alizadeh, S. Labbaf, P. Abachi, 2023, Journal of the mechanical behavior of biomedical materials.