A. Torroni

发表

The role of 3D printing in treating craniomaxillofacial congenital anomalies

Paulo G Coelho, Christopher D Lopez, Andrea Torroni, 2018, Birth defects research.

Dipyridamole-loaded 3D-printed bioceramic scaffolds stimulate pediatric bone regeneration in vivo without disruption of craniofacial growth through facial maturity

Christopher D Lopez, Roberto L. Flores, B. Cronstein, 2019, Scientific Reports.

Mandibular Reconstruction With Different Techniques

Andrea Torroni, T. Marianetti, G. Gasparini, 2015, The Journal of craniofacial surgery.

The age factor in survival of a population cohort of well-differentiated thyroid cancer

K. Pathak, A. Torroni, R. Nason, 2013, Endocrine connections.

Transforming the Degradation Rate of β-tricalcium Phosphate Bone Replacement Using 3-Dimensional Printing

Roberto L. Flores, B. Cronstein, P. Coelho, 2021, Annals of plastic surgery.

Evaluation of Soft Tissue Profile Change Following Bi-maxillary Surgery in Dento-skeletal Class III by Photogrammetric Analysis

P. Angelis, A. Moro, R. Boniello, 2016 .

Tissue-engineered alloplastic scaffolds for reconstruction of alveolar defects

Christopher D Lopez, Roberto L. Flores, B. Cronstein, 2019, Handbook of Tissue Engineering Scaffolds: Volume One.

Surgical Treatment of TMJ Ankylosis: Our Experience (60 Cases)

G. Iannetti, V. Valentini, A. Torroni, 2002, The Journal of craniofacial surgery.

Biocompatibility and degradation properties of WE43 Mg alloys with and without heat treatment: In vivo evaluation and comparison in a cranial bone sheep model.

E. Rodriguez, N. Gupta, Chongchen Xiang, 2017, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

Three dimensionally printed bioactive ceramic scaffold osseoconduction across critical-sized mandibular defects.

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2018, The Journal of surgical research.

Long Term Follow-Up in Inferior Alveolar Nerve Transposition: Our Experience

T. Marianetti, R. Boniello, G. Gasparini, 2014, BioMed research international.

Biomaterial and biomechanical considerations to prevent risks in implant therapy.

P. Coelho, R. Neiva, L. Witek, 2019, Periodontology 2000.

A feasibility and acceptability study of using an intra-oral camera and an asynchronous tele-mentoring protocol to detect and identify oral lesions

A. Troxel, M. Northridge, P. Testa, 2022, Journal of public health research.

Surgical Approach to the Third Area of the Internal Carotid Artery Through Vertical Osteotomy of the Mandibular Ramus: Case Report

G. Iannetti, V. Valentini, A. Battisti, 2002, The Journal of craniofacial surgery.

Does Open Reduction and Internal Fixation Provide a Quality-of-Life Benefit Over Traditional Closed Reduction of Mandibular Condyle Fractures?

A. Torroni, Kevin C. Lee, K. Naik, 2020, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Bone Tissue Engineering in the Growing Calvaria Using Dipyridamole-Coated, Three-Dimensionally-Printed Bioceramic Scaffolds: Construct Optimization and Effects on Cranial Suture Patency.

Roberto L. Flores, B. Cronstein, P. Coelho, 2020, Plastic and reconstructive surgery.

Bone Tissue Engineering in the Growing Calvarium Using Dipyridamole-Coated 3D Printed Bioceramic Scaffolds: Construct Optimization and Effects to Cranial Suture Patency.

Christopher D Lopez, Roberto L. Flores, B. Cronstein, 2019, Plastic and reconstructive surgery.

Surgical Instrumentation Variables Effect on the Osseointegration of Narrow and Wide Diameter Short Implants.

Christopher D Lopez, P. Coelho, L. Witek, 2020, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Osseodensification Versus Subtractive Drilling Techniques in Bone Healing and Implant Osseointegration: Ex Vivo Histomorphologic/Histomorphometric Analysis in a Low-Density Bone Ovine Model.

P. Coelho, L. Witek, A. Torroni, 2021, The International journal of oral & maxillofacial implants.

Alveolar Ridge Expansion: Comparison of Osseodensification and Conventional Osteotome Techniques

P. Coelho, R. Neiva, L. Witek, 2019, The Journal of craniofacial surgery.

Three-Dimensional Printing for Craniofacial Bone Tissue Engineering

Roberto L. Flores, F. Kasper, M. Wong, 2020 .

Effects of relative centrifugation force on L-PRF: An in vivo submandibular boney defect regeneration study.

P. Coelho, L. Witek, A. Torroni, 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

Scapula Free Flap for Complex Maxillofacial Reconstruction

Andrea Torroni, V. Valentini, A. Cassoni, 2009, The Journal of craniofacial surgery.

Microvascular Reconstruction of the Mandible in Irradiated Patients

G. Iannetti, V. Valentini, A. Torroni, 2007, The Journal of craniofacial surgery.

Dipyridamole Augments Three-Dimensionally Printed Bioactive Ceramic Scaffolds to Regenerate Craniofacial Bone

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2019, Plastic and reconstructive surgery.

Abstract

Christopher D Lopez, Roberto L. Flores, E. Wiebe, 1996, Journal of the Neurological Sciences.

Reconstruction of Mid- Facial Defect Secondary to Rhinomaxillary Mucormycosis: Report of a Challenging Case and Literature Review

A. Torroni, G. Longo, F. Romano, 2015 .

Anterior Retrograde Approach to the Myofascial Temporalis Muscle for Orbital Reconstruction: Series of 9 Consecutive Cases

T. Marianetti, A. Moro, G. Gasparini, 2015, Annals of plastic surgery.

"Regeneration of a Pediatric Alveolar Cleft Model using 3D Printed Bioceramic Scaffolds and Osteogenic Agents: Comparison of Dipyridamole and rhBMP-2."

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2019, Plastic and reconstructive surgery.

Dipyridamole enhances osteogenesis of three-dimensionally printed bioactive ceramic scaffolds in calvarial defects.

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2017, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

Pleomorphic adenoma and benign parotid tumors: extracapsular dissection vs superficial parotidectomy--review of literature and meta-analysis.

A. Poscia, C. de Waure, T. Marianetti, 2014, Oral surgery, oral medicine, oral pathology and oral radiology.

WE43 and WE43-T5 Mg alloys screws tested in-vitro cellular adhesion and differentiation assay and in-vivo histomorphologic analysis in an ovine model

J. Hacquebord, N. Gupta, P. Coelho, 2020, Journal of biomaterials applications.

Histo-morphologic characteristics of intra-osseous implants of WE43 Mg alloys with and without heat treatment in an in vivo cranial bone sheep model.

Roberto L. Flores, E. Rodriguez, N. Gupta, 2018, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

The Influence of Surface Treatment on Osseointegration of Endosteal Implants Presenting Decompressing Vertical Chambers: An In Vivo Study in Sheep.

P. Coelho, L. Witek, A. Torroni, 2022, The International journal of oral & maxillofacial implants.

Transcervical Submandibular Sialoadenectomy

G. Iannetti, A. Torroni, M. C. Mustazza, 2007, The Journal of craniofacial surgery.

OSAS Surgery and Postoperative Discomfort: Phase I Surgery versus Phase II Surgery

T. Marianetti, F. Di Nardo, R. Boniello, 2015, BioMed research international.

Use of N-Butyl-2-Cyanoacrylate (Glubran2®) in Fractures of Orbital-Maxillo-Zygomatic Complex

T. Marianetti, A. Moro, R. Boniello, 2015, Journal of Maxillofacial and Oral Surgery.

The Use of a Superiorly Based Melolabial Interpolated Flap for Reconstruction of Anterior Oronasal Fistulas: An Easy and Practical Solution

T. Marianetti, G. Gasparini, S. Pelo, 2015, Annals of plastic surgery.

The effect of platelet-rich fibrin exudate addition to porous poly(lactic-co-glycolic acid) scaffold in bone healing: An in vivo study.

P. Coelho, R. Neiva, L. Witek, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Evaluation of instrumentation and pedicle screw design for posterior lumbar fixation: A pre‐clinical in vivo/ex vivo ovine model

J. Hacquebord, P. Coelho, L. Witek, 2023, JOR spine.

Osseodensification drilling vs conventional manual instrumentation technique for posterior lumbar fixation: Ex‐vivo mechanical and histomorphological analysis in an ovine model

J. Hacquebord, P. Coelho, L. Witek, 2020, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Trismus-pseudocamptodactyly syndrome: a 20 year follow-up.

T. Marianetti, G. Gasparini, S. Pelo, 2014, European journal of paediatric dentistry.

Total Spontaneous Regression of Advanced Merkel Cell Carcinoma after Biopsy: Review and a New Case

A. Richetta, S. Calvieri, G. Iannetti, 2008, Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.].

The Importance of the Head and Neck Region in Regression of Advanced MCC: A Clinical Report

G. Iannetti, A. Torroni, B. Loré, 2007, The Journal of craniofacial surgery.

Use of Microvascular Free Flaps in the Reconstruction of the Anterior and Middle Skull Base

T. Marianetti, G. Iannetti, V. Valentini, 2006, The Journal of craniofacial surgery.

Surgical treatment of recurrent orbital hemangiopericytoma.

M. Pagnoni, V. Valentini, A. Battisti, 2004, The Journal of craniofacial surgery.

Obesity/Metabolic Syndrome and Diabetes Mellitus on Peri-implantitis

Christopher D Lopez, L. Riella, P. Coelho, 2020, Trends in Endocrinology & Metabolism.

An in vivo preclinical study assessing biocompatibility of Pd-based bulk metallic glass.

M. Demetriou, P. Coelho, L. Witek, 2022, Bio-medical materials and engineering.

Haptic, Physical, and Web-Based Simulators: Are They Underused in Maxillofacial Surgery Training?

Andrea Torroni, J Rodrigo Diaz-Siso, Roberto L. Flores, 2018, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Osseodensification for enhancement of spinal surgical hardware fixation.

Paulo G Coelho, Christopher D Lopez, Adham M Alifarag, 2017, Journal of the mechanical behavior of biomedical materials.

Engineered bone grafts and bone flaps for maxillofacial defects: state of the art.

Andrea Torroni, A. Torroni, 2009, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

3D Printing for Craniofacial Bone Tissue Engineering.

Roberto L. Flores, F. Kasper, M. Wong, 2020, Tissue engineering. Part A.

Clinical and morphological characteristics of head-facial haemangiomas

G. Iannetti, C. Cavallotti, A. Torroni, 2007, Head & face medicine.

The “Beauty Arch: ” A New Aesthetic Analysis for Malar Augmentation Planning

Andrea Torroni, Salvatore Cozzolino, T. Marianetti, 2015, The Journal of craniofacial surgery.

"Regeneration of a Pediatric Alveolar Cleft Model using 3D Printed Bioceramic Scaffolds and Osteogenic Agents: Comparison of Dipyridamole and rhBMP-2."

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2019, Plastic and reconstructive surgery.

Reconstruction of severe atrophic jaws with Fresh Frized Bone Allografts: clinical histologic and histomorphometric evaluation.

T. Marianetti, R. Boniello, G. Gasparini, 2013, European review for medical and pharmacological sciences.

Bone regeneration at extraction sockets filled with leukocyte-platelet-rich fibrin: An experimental pre-clinical study

P. Coelho, L. Witek, A. Torroni, 2022, Medicina oral, patologia oral y cirugia bucal.

Effect of leukocyte-platelet-rich fibrin in bone healing around dental implants placed in conventional and wide osteotomy sites: A pre-clinical study.

P. Coelho, L. Witek, A. Torroni, 2022, Journal of biomedical materials research. Part B, Applied biomaterials.

Algebraic aspects of attribute dependencies

Roberto L. Flores, I. Düntsch, G. Gediga, 1999 .

Clinical Evaluation of Obstructive Sleep Apnea in Children

F. Rinaldo, T. Marianetti, R. Boniello, 2012, The Journal of craniofacial surgery.

Three-Dimensionally-Printed Bioactive Ceramic Scaffolds-Construct Effects on Bone Regeneration: A Pilot Study.

Christopher D Lopez, Jonathan M. Bekisz, Roberto L. Flores, 2020, The Journal of craniofacial surgery.

3D Printing and Adenosine Receptor Activation for Craniomaxillofacial Regeneration

Christopher D Lopez, Roberto L. Flores, E. Rodriguez, 2019, Regenerative Strategies for Maxillary and Mandibular Reconstruction.

Reconstruction of Premaxilla With Fibula Free Flap

G. Iannetti, V. Valentini, A. Torroni, 2007, The Journal of craniofacial surgery.

Engineering 3D Printed Bioceramic Scaffolds to Reconstruct Critical-Sized Calvaria Defects in a Skeletally Immature Pig Model

B. Cronstein, P. Coelho, L. Witek, 2023 .

Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration.

F. Kasper, S. Young, P. Coelho, 2023, Tissue engineering. Part C, Methods.

Osteogenic differentiation and reconstruction of mandible defects using a novel resorbable membrane: An in vitro and in vivo experimental study.

P. Coelho, L. Witek, A. Torroni, 2023, Journal of biomedical materials research. Part B, Applied biomaterials.

Bone healing around implants placed in subjects with metabolically compromised systemic conditions.

P. Coelho, L. Witek, A. Torroni, 2023, Journal of biomedical materials research. Part B, Applied biomaterials.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part II: Translational Potential of 3D-Printed Scaffolds for Defect Repair

P. Coelho, L. Witek, A. Torroni, 2023, The Journal of craniofacial surgery.

Engineering 3D Printed Bioceramic Scaffolds to Reconstruct Critical-Sized Calvaria Defects in a Skeletally Immature Pig Model

B. Cronstein, P. Coelho, L. Witek, 2023, Plastic and reconstructive surgery.

3D Printing Type 1 Bovine Collagen Scaffolds for Tissue Engineering Applications—Physicochemical Characterization and In Vitro Evaluation

J. Smay, M. Weck, P. Coelho, 2023, Gels.

Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering

L. Witek, A. Torroni, V. Nayak, 2024, Journal of functional biomaterials.

Sustained Release of Salicylic Acid for Halting Peri-Implantitis Progression in Healthy and Hyperglycemic Systemic Conditions: A Gottingen Minipig Model

K. Uhrich, A. Torroni, E. Bonfante, 2024, ACS biomaterials science & engineering.

“Regeneration of a Pediatric Alveolar Cleft Model using 3D Printed Bioceramic Scaffolds and Osteogenic Agents: Comparison of Dipyridamole and rhBMP-2.”

Christopher D Lopez, Jonathan M. Bekisz, P. Coelho, 2019 .