Jianfeng Li

发表

Study on the Influence of Different Tool Edge Radius on Milling Ti6Al4V

Jianfeng Li, Feng Jiang, Yueping Liu, 2010 .

Numerical simulation of air flow field in high-pressure fan with splitter blades

Jianfeng Li, Junfu Lu, Hai Zhang, 2008 .

Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy

Jianfeng Li, Jun Zhou, Jie Sun, 2013 .

Effect of Cracked Blade Distribution on Strength of Centrifugal Impeller

Jianfeng Li, Gang Cheng, Wei Qiang Wang, 2013 .

Spatial resolution enhancement of a red-sensitive acrylamide based photopolymer and its holographic applications

Jianfeng Li, Li Chen, Jianhua Zhu, 2005, SPIE Optics + Photonics.

Measurement of gear-tooth instantaneous deformation by optical method

Jianfeng Li, Wenxin Liu, Chuanmin Zhu, 1996, Other Conferences.

Vibration analysis in milling titanium alloy based on signal processing of cutting force

Jianfeng Li, Jun Zhou, Jie Sun, 2013 .

Design and test of a near-infrared tunable liquid crystal birefringent filter

Jianfeng Li, Dayong Zhang, Yan Long, 2014, SPIE Remote Sensing.

Improved ESPRIT Method for Joint Direction-of-Arrival and Frequency Estimation Using Multiple-Delay Output

Jianfeng Li, Wang Xudong, Xiaofei Zhang, 2012 .

Effect of Cracked Blade Distribution on Vibration Characteristics of Centrifugal Impeller

Jianfeng Li, Gang Cheng, Jie Sun, 2013 .

Research of Color Composite of WorldView-2 Based on Optimum Band Combination

Jianfeng Li, Jianping Chen, Yan Sun, 2013 .

Present Utilization Analysis and Development Countermeasures on Biomass Energy in China

Jianfeng Li, Jiwen Ge, 2011 .

A novel approach to determination of wheel position and orientation for five-axis CNC flute grinding of end mills

Jie Sun, Jianfeng Li, Liming Wang, 2016 .

Mid-infrared pulsed fiber lasers operating at 3μm region

Jianfeng Li, Yong Liu, Zhiyao Zhang, 2014, Photonics Asia.

Analysis of Transplanting Turbofan Engine Technology to Reducing Power Consumption Rate of Thermal Power Unit

Jianfeng Li, 2012 .

Comprehensive effects of tool paths on energy consumption, machining efficiency, and surface integrity in the milling of alloy cast Iron

Gang Li, Jianfeng Li, Song Zhang, 2018, The International Journal of Advanced Manufacturing Technology.

Optimization Parameters for Energy Efficiency in End milling

Jianfeng Li, Fangyi Li, John W. Sutherland, 2018 .

Calibration of a portable laser 3-D scanner used by a robot and its use in measurement

Jianfeng Li, Yishan Wang, Yongkang Guo, 2008 .

3D Flexible, Conductive and Wearable Fabric Strain Sensors

Jianfeng Li, Xiaoming Tao, Hong Hu, 2015 .

Design and Analysis of a Linear Digital Variable Stiffness Actuator

Jianfeng Li, Kai Guo, Jie Sun, 2021, IEEE Access.

Multi-layer integration framework for low carbon design based on design features

Jianfeng Li, Fangyi Li, Liming Wang, 2021, Journal of Manufacturing Systems.

Design, modeling and control of a reconfigurable variable stiffness actuator

Jianfeng Li, Kai Guo, Jie Sun, 2021 .

Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill

Jianfeng Li, Jie Sun, Jie Sun, 2012 .

Optimizing end-milling parameters for surface roughness under different cooling/lubrication conditions

Jianfeng Li, Jie Sun, Lan Yan, 2010 .

Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process

Jianfeng Li, Jens Twiefel, Jie Sun, 2018 .

An Experimental Investigation of Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy

Jianfeng Li, Jie Sun, Xiaoming Huang, 2013 .

Tool wear criterion, tool life, and surface roughness during high-speed end milling Ti-6Al-4V alloy

Jianfeng Li, Song Zhang, Song Zhang, 2010 .

Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack

Jianfeng Li, Kai Guo, Jie Sun, 2018, Journal of Materials Processing Technology.

Experiments and Finite Element Simulations on Micro-Milling of Aluminium Alloy 7050-T7451

Jianfeng Li, Jie Sun, Fu Zeng Wang, 2012 .

Tool Wear in High-Speed Milling of Ti-6Al-4V Alloy

Jianfeng Li, Song Zhang, Feng Jiang, 2008 .

Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions

Jianfeng Li, Song Zhang, Song Zhang, 2014 .

Investigation on performance characteristics in drilling of Ti6Al4V alloy

Jianfeng Li, Shaochun Sui, Jie Sun, 2017 .

Prediction of Surface Roughness Using Back-Propagation Neural Network in End Milling Ti-6Al-4V Alloy

Jianfeng Li, Song Zhang, Song Zhang, 2011 .

Study on performance in dry milling aeronautical titanium alloy thin-wall components with two types of tools

Jianfeng Li, Jie Sun, Jie Sun, 2014 .

A life cycle impact assessment method based on multi-environmental dimension

Jianfeng Li, Fangyi Li, Liming Wang, 2010 .

An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti6Al4V by applying semi-artificial thermocouple

Jianfeng Li, Jie Sun, Yujing Sun, 2013, The International Journal of Advanced Manufacturing Technology.

Optimal Cutting Parameters for Desired Surface Roughness in End Milling Inconel 718

Jianfeng Li, Song Zhang, Yuan Wei Wang, 2010 .

Three Dimensional Finite Element Simulation of Cutting Forces and Cutting Temperature in Hard Milling of AISI H13 Steel

Jianfeng Li, Song Zhang, Song Zhang, 2017 .

Investigation on delamination morphology during drilling composite laminates

Jianfeng Li, Jie Sun, Haijin Wang, 2014 .

Study on chip morphology and milling characteristics of laser cladding layer

Jianfeng Li, Jie Sun, Yanhua Zhao, 2015 .

Experimental investigation of the effect of tool geometry on residual stresses in high speed milling 7050-T7451 aluminium alloy

Jianfeng Li, Jie Sun, Xiaoming Huang, 2015 .

Characterizing the effect of process variables on energy consumption in end milling

Jianfeng Li, Fu Zhao, John W. Sutherland, 2018, The International Journal of Advanced Manufacturing Technology.

Investigation on the forming force and surface quality during ultrasonic-assisted incremental sheet forming process

Jianfeng Li, Fangyi Li, Weidong Zhai, 2020 .

Undirected graph model of product family architecture for mass customization

Jianfeng Li, Jian Chen, Fangyi Li, 2006 .