V. Niola

发表

A comparison on accuracy of numerical methods: an application to a varying mass system based on wavelet transform

V. Niola, Rosario Oliviero, G. Quaremba, 2005 .

SPECTRAL-LIKE APPROACH TO MODELLING THE LIQUID FUEL ATOMISATION PROCESS IN A REACTOR

V. Niola, G. Quaremba, C. Mongiello, 2007 .

Nonlinear methodology for assessing vibrational dynamics of a single gear pair under different tribological conditions

R. Brancati, E. Rocca, S. Savino, 2019, Advances in Mechanism and Machine Science.

On the definition of functioning conditions of a mechanical system by means orthogonal processing

V. Niola, G. Quaremba, A. Donnarumma, 2005 .

The problem of signal denoising for detecting the presence of spikes

V. Niola, Rosario Oliviero, G. Quaremba, 2006 .

Pattern recognition and feature extraction: a comparative study

V. Niola, G. Quaremba, 2005 .

A self learning neural network for detecting anomalies of a gear system

A. Montanino, V. Niola, G. Quaremba, 2017 .

The application of DWT for determining the level of audibility

V. Niola, G. Quaremba, 2006 .

Comparison of linear methodologies and not for the evaluation of the vibrational morphodynamics of a pair of gears in different tribological conditions

S. Savino, L. Russo, V. Niola, 2020, Journal of Physics: Conference Series.

Chaos Theory Approach as Advanced Technique for GDI Spray Analysis

Luigi Allocca, Alessandro Montanaro, G. Langella, 2017 .

Fuzzy Logic Approach to GDI Spray Characterization

Luigi Allocca, Alessandro Montanaro, G. Langella, 2016 .

Real-Time EMG Based Pattern Recognition Control for Hand Prostheses: A Review on Existing Methods, Challenges and Future Implementation

Paolo Bifulco, Mario Cesarelli, Upul Gunawardana, 2019, Sensors.

A problem of emphasizing features of a surface roughness by means the Discrete Wavelet Transform

Vincenzo Niola, Gennaro Nasti, Giuseppe Quaremba, 2005 .

The impact of biofuel properties on emissions and performances of a micro gas turbine using combustion vibrations detection

G. Langella, A. Amoresano, C. Allouis, 2018, Fuel Processing Technology.

Experimental characterization of a pressure swirl spray by analyzing the half cone angle fluctuation

A. Amoresano, P. Iodice, C. Allouis, 2018, Experimental Thermal and Fluid Science.

Advanced Image Analysis of Two-Phase Flow inside a Centrifugal Pump

G. Langella, V. Niola, A. Amoresano, 2014 .

Nearly real-time monitoring of gearbox vibration signal using DWT

Vincenzo Niola, V. Avagliano, Giuseppe Quaremba, 2010 .

The “Federica” Hand

P. Bifulco, S. Savino, D. Esposito, 2021, Bioengineering.

A new index for monitoring the duration test

Vincenzo Niola, V. Avagliano, Giuseppe Quaremba, 2009 .

A real time algorithm for monitoring the gearbox reliability test

Vincenzo Niola, V. Avagliano, Giuseppe Quaremba, 2009 .

Tribological behaviour of sintered iron bearings self-lubricated with PFPE under severe operating conditions

V. Niola, G. Caporiccio, V. D’Agostino, 1988 .

A non-parametric method for the estimation of a GPD parameter based on wavelet theory

V. Niola, Rosario Oliviero, G. Quaremba, 2005 .

Tribological study of a mechanical component built on a benzine engine utilizing the finisched elements method (F.E.M.) and Coffin-Manson's law

Vincenzo Niola, Giuseppe Vitale, V. Niola, 2008, ICONS 2008.

Mechanical System Control by RGB-D Device

S. Savino, D. Esposito, V. Niola, 2020, Machines.

Experimental Approaches to Measure Displacements in Mechanical Systems Through Vision Devices

Sergio Savino, Vincenzo Niola, Chiara Cosenza, 2020 .

Motion Sensing Study on a Mobile Robot Through Simulation Model and Experimental Tests

S. Savino, V. Niola, C. Cosenza, 2022, WSEAS TRANSACTIONS ON APPLIED AND THEORETICAL MECHANICS.

Experimental Study to Improve “Federica” Prosthetic Hand and Its Control System

Paolo Bifulco, Vincenzo Niola, Giovanni D'Addio, 2019, IFMBE Proceedings.

A method for the calibration of a 3-D laser scanner

Salvatore Strano, Cesare Rossi, Sergio Savino, 2011 .

Robot assisted 3D shape acquisition by optical systems

Salvatore Strano, Cesare Rossi, Sergio Savino, 2010 .

Theoretical study on a modified rocker-bogie suspension for robotic rovers

S. Savino, V. Niola, S. Pagano, 2023, Robotica.

A study of a robotic hand with tendon driven fingers

Cesare Rossi, Sergio Savino, Vincenzo Niola, 2014, Robotica.

A mechanical hand for prosthetic applications: multibody model and contact simulation

Sergio Savino, Vincenzo Niola, Chiara Cosenza, 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Influence of the Tendon Design on the Behavior of an Under-Actuated Finger

Cesare Rossi, Sergio Savino, Vincenzo Niola, 2017, RAAD.

Study of an Underactuated Mechanical Finger Driven by Tendons

Francesco Timpone, Cesare Rossi, Sergio Savino, 2017, Int. J. Autom. Technol..

Design, Modelling and Prototyping of a Mechanical Hand for Prosthetic Purposes

Cesare Rossi, Sergio Savino, Vincenzo Niola, 2016, RAAD.

An Underactuated Mechanical Hand Prosthesys by Iftomm Italy

Giuseppe Quaglia, Alessandro Gasparetto, Giuseppe Carbone, 2015 .

A model for the grasping analysis of an underactuated finger driven by unextensible tendon

Cesare Rossi, Sergio Savino, Vincenzo Niola, 2016 .

Simulation results of the grasping analysis of an underactuated finger

Cesare Rossi, Sergio Savino, Vincenzo Niola, 2016 .

A Piezoresistive Sensor to Measure Muscle Contraction and Mechanomyography

Paolo Bifulco, Sergio Savino, Antonio Fratini, 2018, Sensors.

A stretchable, conductive rubber sensor to detect muscle contraction for prosthetic hand control

P. Bifulco, D. Esposito, G.D. Gargiulo, 2017, 2017 E-Health and Bioengineering Conference (EHB).

Nonlinear Models for the Vibrational Analysis of a Complex Dynamical System

Vincenzo Niola, Giuseppe Quaremba, Gennaro Pellino, 2016, 2016 Third International Conference on Mathematics and Computers in Sciences and in Industry (MCSI).

A nonlinear spectrum for the diagnostics of a complex dynamical system

Vincenzo Niola, Giuseppe Quaremba, Gennaro Pellino, 2016 .