J. Font

发表

Martensite stabilization in a high temperature Ni–Mn–Ga alloy

C. Seguí, E. Cesari, J. Font, 2005 .

ac technique applied to cp measurements in the martensite transformation of CuZnAl alloys

E. Cesari, J. Font, J. Muntasell, 1992 .

ΔH and activation energy of dehydration—anation processes calculated from dynamic TG and DTA

J. Ribas, E. Cesari, J. Font, 1986 .

Melanges pentaglycerine/neopentylglycol: formation d'une solution solide

J. Font, J. Muntasell, J. Tamarit, 1988 .

Sublimation measurements on plastic crystals. Influence of the hydroxyl group on the sublimation enthalpy and vapour pressure

J. Font, J. Muntasell, 1994 .

The effects of temperature on the behaviour of an apatitic calcium phosphate cement

E. Fernández, J. Planell, M. Ginebra, 1995 .

Plastic molecular alloys: the binary system tris(hydroximethyl)aminomethane / 2-amino-2-methyl-1,3-propanediol

D. López, J. Font, J. Muntasell, 1994 .

Floor radiant system with heat storage by a solid-solid phase transition material

Maria Barrio, D. López, J. Font, 1992 .

Applicability for heat storage of binary systems of neopentylglycol, pentaglycerine and pentaerythritol: A comparative analysis

J. Font, J. Muntasell, M. Barrio, 1988 .

Miscibility in plastic phases: Binary system NPG (neopentylglycol)/AMP (2-amino,2-methyl-1,3-propanediol)

P. Négrier, D. López, J. Font, 1994 .

Miscibility and molecular interactions in plastic phases: Binary system pentaglycerin/ tris(hydroxymethyl)aminomethane

P. Négrier, D. López, J. Font, 1993 .

Determination of an intermediate cubic phase in the PE/NPG binary system by X-ray powder diffraction

D. López, J. Font, J. Muntasell, 1991 .

Low temperature invariant in pentaerythritol/neopentylglycol binary system

D. López, J. Font, J. Muntasell, 1989 .

Crystalline solid to plastic crystal transitions in pentaglycerine-neopentylglycol mixtures

J. Font, J. Muntasell, J. Tamarit, 1987 .

Time and temperature dependence of the exchanged energy on solid-solid transitions of pentaglycerine/neopentylglycol mixtures

J. Font, J. Muntasell, J. Tamarit, 1987 .

Calorimetric study of the mixtures PE/NPG and PG/NPG

J. Font, J. Muntasell, J. Font, 1987 .

Comparative study on solid crystalline–plastic–vapour equilibrium in plastic crystals from pentaerythritol series

J. Font, J. Muntasell, 1995 .

Polymorphism in 2-Amino-2-Methyl-l,3 propanediol plastic crystal

F. Cossío, D. López, J. Font, 1991 .

Binary system neopentylglycol/pentaglycerin

D. López, J. Font, J. Muntasell, 1990 .

Calorimetric determination of enthalpy changes in octylcyanobiphenyl (8CB) liquid crystal transitions

E. Cesari, J. Font, J. Muntasell, 1987 .

AC Calorimetry applied to powdered samples

J. Font, M. Barrio, J. Tamarit, 1991 .

Application of harmonic analysis and standard inverse filtering to a dta system

J. Font, J. Muntasell, J. Tamarit, 1986 .

Simulation of a DTA system by the RC model

E. Cesari, J. Font, J. Muntasell, 1985 .

A simple model for calorimeters with temperature programming

E. Cesari, J. Font, J. Muntasell, 1985 .

Thermal stability and ordering effects in Ni-Fe-Ga ferromagnetic shape memory alloys

R. Santamarta, J. Dutkiewicz, J. Pérez-Landazábal, 2008 .

Effect of atomic order on the martensitic transformation of Ni¿Fe¿Ga alloys

J. Dutkiewicz, R. Santamarta, J. Pons, 2006 .

Ageing Behaviour of High‐Temperature Ni‐Mn‐Ga Alloys

R. Santamarta, P. Ochin, J. Pons, 2013 .

Thermal stability and microstructure of Ni–Mn–Ga–Cu high temperature shape memory alloys

R. Santamarta, E. Cesari, J. Font, 2015 .

Cold-crystallization of Poly(ether-ether-ketone) amorphized by ball milling

E. Cesari, J. Font, J. Muntasell, 2001 .

Effect of milling on the thermal behaviour of poly(ethylene terephthalate)

E. Cesari, J. Font, J. Muntasell, 1999 .

Influence of deconvolution on kinetic studies by DTA: Part II. Determination of the kinetic parameters

E. Cesari, J. Font, J. Muntasell, 1986 .

Influence of deconvolution on kinetic studies by DTA: Part I. Determination of the reaction mechanism

E. Cesari, J. Font, J. Muntasell, 1986 .

Effect of ball milling on semicrystalline bisphenol A polycarbonate

J. Font, J. Muntasell, 2000 .

Binary mixtures of semicrystalline/noncrystalline polymers formed by ball milling

E. Cesari, J. Font, J. Muntasell, 1999 .

Poly(butylene terephthalate) poly(ethylene terephthalate) mixtures formed by ball milling

E. Cesari, J. Font, J. Muntasell, 1999 .

SOLID-STATE MECHANICAL ALLOYING OF PLASTIC CRYSTALS

J. Pons, E. Cesari, J. Font, 1997 .

Amorphization of organic compounds by ball milling

E. Cesari, J. Font, J. Muntasell, 1997 .

Preparation of molecular alloys by the ball-milling technique

J. Pons, E. Cesari, J. Font, 1996 .

Simulation of a DTA system by the RC model. Application to a real process

E. Cesari, J. Font, J. Muntasell, 1985 .

Thermal stability of high-temperature Ni-Mn-Ga alloys

P. Ochin, R. Santamarta, J. Pons, 2008 .

Thermobarometric study of KNO3 phase transitions

J. Font, J. Muntasell, 1997 .

ac technique applied to cp measurements in Ni–Mn–Ga alloys

E. Cesari, J. Font, J. Muntasell, 2005 .

Effect of ageing on the martensitic transformation of Ni–Fe–Ga alloys

J. Dutkiewicz, R. Santamarta, J. Pons, 2006 .

Thermal and microstructural evolution under ageing of several high-temperature Ni–Mn–Ga alloys

P. Ochin, R. Santamarta, J. Pons, 2010 .

Effect of ageing in Ni–Fe–Ga ferromagnetic shape memory alloys

J. Dutkiewicz, R. Santamarta, J. Pons, 2006 .

Thermomechanical cycling in Cu–Al–Ni-based melt-spun shape-memory ribbons

E. Cesari, J. Pons, J. Pons, 2003 .

Thermal cycling effects in high temperature Cu–Al–Ni–Mn–B shape memory alloys

J. Pons, E. Cesari, J. Font, 1997 .

Preliminary study of a heat storage unit using a solid-solid transition

J. Font, J. Muntasell, J. Font, 1994 .