M. Kyomoto

发表

Fabrication of hydroxyapatite microparticles including silver nano-dots at grain boundary for long-term antimicrobial property

T. Ikoma, Hiroaki Igashira, Michimasa Kamo, 2017 .

PE wear in ceramic/PE bearing surface in total knee arthroplasty: Clinical experiences of more than 24 years

Mikio Iwamoto, H. Oonishi, H. Oonishi, 2006 .

Injectable Natural Polymer Hydrogels for Treatment of Knee Osteoarthritis

Miqin Zhang, Xiaojie Lin, M. Kyomoto, 2021, Advanced healthcare materials.

Bioactive PMMA bone cement prepared by modification with methacryloxypropyltrimethoxysilane and calcium chloride.

M. Tanihara, C. Ohtsuki, T. Miyazaki, 2003, Journal of biomedical materials research. Part A.

Development of bioactive PMMA-based cement by modification with alkoxysilane and calcium salt

M. Tanihara, C. Ohtsuki, T. Miyazaki, 2001, Journal of materials science. Materials in medicine.

High lubricious surface of cobalt-chromium-molybdenum alloy prepared by grafting poly(2-methacryloyloxyethyl phosphorylcholine).

Kozo Nakamura, K. Ishihara, Y. Iwasaki, 2007, Biomaterials.

Phospholipid Polymer-Grafted Poly(Ether-Ether-Ketone) by Self-Initiated Surface Grafting

K. Ishihara, T. Moro, M. Kyomoto, 2019, PEEK Biomaterials Handbook.

Prevention of bacterial adhesion and biofilm formation on a vitamin E-blended, cross-linked polyethylene surface with a poly(2-methacryloyloxyethyl phosphorylcholine) layer.

Sakae Tanaka, K. Ishihara, T. Moro, 2015, Acta biomaterialia.

Antithrombogenicity of poly(ether ether ketone) surface prepared by self-initiated surface graft polymerization of 2-methacryloyloxyethyl phosphorylcholine

K. Ishihara, T. Yamaoka, M. Kyomoto, 2012 .

Wear resistance of artificial hip joints with poly(2-methacryloyloxyethyl phosphorylcholine) grafted polyethylene: comparisons with the effect of polyethylene cross-linking and ceramic femoral heads.

Kazuhiko Ishihara, Hiroshi Kawaguchi, Toru Moro, 2009, Biomaterials.

Wear resistance of poly(2-methacryloyloxyethyl phosphorylcholine)-grafted carbon fiber reinforced poly(ether ether ketone) liners against metal and ceramic femoral heads.

Sakae Tanaka, K. Ishihara, T. Moro, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Phospholipid Polymer Grafted Highly Cross-Linked UHMWPE

K. Ishihara, T. Moro, M. Kyomoto, 2016 .

Influences of dehydration and rehydration on the lubrication properties of phospholipid polymer-grafted cross-linked polyethylene

Sakae Tanaka, K. Ishihara, S. Yarimitsu, 2015, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Long‐term hip simulator testing of the artificial hip joint bearing surface grafted with biocompatible phospholipid polymer

K. Ishihara, H. Kawaguchi, T. Moro, 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Poly(2-methacryloyloxyethyl phosphorylcholine) grafting and vitamin E blending for high wear resistance and oxidative stability of orthopedic bearings.

Sakae Tanaka, K. Ishihara, T. Moro, 2014, Biomaterials.

Poly(ether-ether-ketone) orthopedic bearing surface modified by self-initiated surface grafting of poly(2-methacryloyloxyethyl phosphorylcholine).

K. Ishihara, T. Moro, Y. Takatori, 2013, Biomaterials.

Biomimetic hydration lubrication with various polyelectrolyte layers on cross-linked polyethylene orthopedic bearing materials.

K. Ishihara, H. Kawaguchi, T. Moro, 2012, Biomaterials.

Reduction of Peritendinous adhesions by hydrogel containing biocompatible phospholipid polymer MPC for tendon repair.

Kozo Nakamura, K. Ishihara, T. Konno, 2011, The Journal of bone and joint surgery. American volume.

The prevention of peritendinous adhesions by a phospholipid polymer hydrogel formed in situ by spontaneous intermolecular interactions.

Kozo Nakamura, K. Ishihara, T. Konno, 2010, Biomaterials.

Enhanced wear resistance of modified cross-linked polyethylene by grafting with poly(2-methacryloyloxyethyl phosphorylcholine).

Kozo Nakamura, K. Ishihara, T. Konno, 2007, Journal of biomedical materials research. Part A.

Enhanced wear resistance of orthopaedic bearing due to the cross-linking of poly(MPC) graft chains induced by gamma-ray irradiation.

Kozo Nakamura, K. Ishihara, T. Konno, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Efficacy of hydrated phospholipid polymer interfaces between all-polymer bearings for total hip arthroplasty.

Sakae Tanaka, K. Ishihara, T. Moro, 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

A hydrated phospholipid polymer-grafted layer prevents lipid-related oxidative degradation of cross-linked polyethylene.

Sakae Tanaka, K. Ishihara, T. Moro, 2017, Biomaterials.

High-efficiency preparation of poly(2-methacryloyloxyethyl phosphorylcholine) grafting layer on poly(ether ether ketone) by photoinduced and self-initiated graft polymerization in an aqueous solution in the presence of inorganic salt additives.

K. Ishihara, M. Kyomoto, Y. Inoue, 2016, Acta biomaterialia.

Smart PEEK

Sakae Tanaka, K. Ishihara, T. Moro, 2016 .

Surface Modification on Poly(ether ether ketone) with Phospholipid Polymer via Photoinduced Self-Initiated Grafting

K. Ishihara, M. Kyomoto, Y. Inoue, 2015 .

Reduced platelets and bacteria adhesion on poly(ether ether ketone) by photoinduced and self-initiated graft polymerization of 2-methacryloyloxyethyl phosphorylcholine.

K. Ishihara, T. Yamaoka, M. Kyomoto, 2014, Journal of biomedical materials research. Part A.

Smart PEEK Modified by Self-Initiated Surface Graft Polymerization for Orthopedic Bearings

Sakae Tanaka, K. Ishihara, T. Moro, 2014 .

Self-initiated surface graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on poly(ether ether ketone) by photoirradiation.

K. Ishihara, M. Kyomoto, 2009, ACS applied materials & interfaces.

Superlubricious surface mimicking articular cartilage by grafting poly(2-methacryloyloxyethyl phosphorylcholine) on orthopaedic metal bearings.

Kozo Nakamura, K. Ishihara, Y. Iwasaki, 2009, Journal of biomedical materials research. Part A.

Effect of UV-irradiation intensity on graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on orthopedic bearing substrate.

K. Ishihara, T. Moro, Y. Takatori, 2014, Journal of biomedical materials research. Part A.

Self-initiated surface grafting with poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone).

Kazuhiko Ishihara, Hiroshi Kawaguchi, Toru Moro, 2010, Biomaterials.

Synthesis of Bioactive PMMA Bone Cement via Modification with Alkoxysilane and Calcium Salt; Effect of Calcium Salt

M. Tanihara, C. Ohtsuki, T. Miyazaki, 2001 .

Clinical safety and wear resistance of the phospholipid polymer‐grafted highly cross‐linked polyethylene liner

Kozo Nakamura, Sakae Tanaka, K. Ishihara, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Reducing fretting-initiated crevice corrosion in hip simulator tests using a zirconia-toughened alumina femoral head.

K. Ishihara, T. Moro, M. Kyomoto, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Grafting of poly(2-methacryloyloxyethyl phosphorylcholine) on polyethylene liner in artificial hip joints reduces production of wear particles.

Sakae Tanaka, K. Ishihara, H. Kawaguchi, 2014, Journal of the mechanical behavior of biomedical materials.

Ceramic versus cobalt-chrome femoral components; wear of polyethylene insert in total knee prosthesis.

Hironobu Oonishi, Mikio Iwamoto, Masaru Ueno, 2009, The Journal of arthroplasty.

Ceramic Total Knee Arthroplasty: Advanced Clinical Experiences of 26 Years

H. Oonishi, M. Ueno, M. Kyomoto, 2006 .

Polymers for Artificial Joints

K. Ishihara, T. Moro, M. Kyomoto, 2013 .

A phospholipid polymer graft layer affords high resistance for wear and oxidation under load bearing conditions.

Sakae Tanaka, K. Ishihara, T. Moro, 2018, Journal of the mechanical behavior of biomedical materials.

Effects of extra irradiation on surface and bulk properties of PMPC-grafted cross-linked polyethylene.

Sakae Tanaka, K. Ishihara, T. Moro, 2016, Journal of biomedical materials research. Part A.

A dynamic pedicle screw system using polyethylene insert for the lumbar spine.

Y. Oshima, Y. Matsubayashi, Y. Taniguchi, 2022, Journal of biomedical materials research. Part B, Applied biomaterials.

Evaluation of wear suppression for phospholipid polymer-grafted ultra-high molecular weight polyethylene at concentrated contact

Sakae Tanaka, K. Ishihara, S. Yarimitsu, 2016 .

Time course of surface characteristics of alkali- and heat-treated titanium dental implants during vacuum storage.

F. Miyaji, Michimasa Kamo, M. Kyomoto, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Effects of a roughened femoral head and the locus of grafting on the wear resistance of the phospholipid polymer-grafted acetabular liner.

Kozo Nakamura, Sakae Tanaka, K. Ishihara, 2019, Acta biomaterialia.

Wear and toughness of crosslinked polyethylene for total knee replacements: A study using a simulator and small‐punch testing

I. Clarke, M. Akagi, C. Hamanishi, 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Wear of highly cross-linked polyethylene acetabular cup in Japan.

H. Oonishi, M. Ueno, M. Kyomoto, 2006, The Journal of arthroplasty.

Effect of 2-methacryloyloxyethyl phosphorylcholine concentration on photo-induced graft polymerization of polyethylene in reducing the wear of orthopaedic bearing surface.

Kozo Nakamura, K. Ishihara, H. Kawaguchi, 2008, Journal of biomedical materials research. Part A.

Effects of photo-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on physical properties of cross-linked polyethylene in artificial hip joints

Kazuhiko Ishihara, Hiroshi Kawaguchi, Tomohiro Konno, 2007, Journal of materials science. Materials in medicine.

Lubricity and stability of poly(2-methacryloyloxyethyl phosphorylcholine) polymer layer on Co-Cr-Mo surface for hemi-arthroplasty to prevent degeneration of articular cartilage.

Kazuhiko Ishihara, Hiroshi Kawaguchi, Toru Moro, 2010, Biomaterials.

Short-term evaluation of thromboresistance of a poly(ether ether ketone) (PEEK) mechanical heart valve with poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-grafted surface in a porcine aortic valve replacement model.

K. Fukazawa, K. Ishihara, T. Yamaoka, 2019, Journal of biomedical materials research. Part A.

The effects of presence of a backside screw hole on biotribological behavior of phospholipid polymer-grafted crosslinked polyethylene.

Y. Kadono, Sakae Tanaka, K. Ishihara, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Effects of Surface Modification and Bulk Geometry on the Biotribological Behavior of Cross-Linked Polyethylene: Wear Testing and Finite Element Analysis

Y. Kadono, Sakae Tanaka, K. Ishihara, 2015, BioMed research international.

Wear resistance of the biocompatible phospholipid polymer‐grafted highly cross‐linked polyethylene liner against larger femoral head

Sakae Tanaka, K. Ishihara, H. Kawaguchi, 2015, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Oxidation and Wear of 100-Mrad Cross-linked Polyethylene Shelf-aged for 30 Years

M. Kyomoto, S. Kim, S. Masuda, 2008, Clinical orthopaedics and related research.

Wear of '100 Mrad' cross-linked polyethylene: effects of packaging after 30 years real-time shelf-aging

H. Oonishi, M. Ueno, M. Kyomoto, 2007, Journal of biomaterials science. Polymer edition.

Effects of Material Thickness and Surface Modification of Cross-linked Polyethylene with Poly(2-Methacryloyloxyethyl Phosphorylcholine) on Its Deformation Behavior, Wear Resistance, and Durability Under Repetitive Impact-to-sliding Motion

Y. Kadono, Sakae Tanaka, K. Ishihara, 2017 .

Surface grafting of biocompatible phospholipid polymer MPC provides wear resistance of tibial polyethylene insert in artificial knee joints.

K. Ishihara, K. Nakamura, H. Kawaguchi, 2010, Osteoarthritis and cartilage.

Clinical and radiographic outcomes of total hip replacement with poly(2-methacryloyloxyethyl phosphorylcholine)-grafted highly cross-linked polyethylene liners: Three-year results of a prospective consecutive series

Sakae Tanaka, K. Ishihara, T. Umeyama, 2015, Modern rheumatology.

Multidirectional Wear and Impact-to-wear Tests of Phospholipid-polymer-grafted and Vitamin E-blended Crosslinked Polyethylene: A Pilot Study

Sakae Tanaka, K. Ishihara, T. Moro, 2015, Clinical orthopaedics and related research.

Radiographic and retrieval wear analyses of the first generation highly cross-linked polyethylene cup against a ceramic femoral head.

H. Oonishi, M. Ueno, M. Kyomoto, 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

Strain in UHMWPE for orthopaedic use studied by Raman microprobe spectroscopy

G. Pezzotti, M. Kyomoto, Yasutake Miwa, 2007, Journal of biomaterials science. Polymer edition.

Change in UHMWPE properties of retrieved ceramic total knee prosthesis in clinical use for 23 years.

I. Clarke, H. Oonishi, M. Kyomoto, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Hydrated Phospholipid Polymer Gel-Like Layer for Increased Durability of Orthopedic Bearing Surfaces.

Sakae Tanaka, K. Ishihara, T. Moro, 2018, Langmuir : the ACS journal of surfaces and colloids.

Cartilage-mimicking, High-density Brush Structure Improves Wear Resistance of Crosslinked Polyethylene: A Pilot Study

K. Ishihara, H. Kawaguchi, T. Moro, 2011, Clinical orthopaedics and related research.

Clinical applications of ceramic-polyethylene combinations in joint replacement

Shingo Masuda, H. Oonishi, M. Ueno, 2008 .

Comparison of In-Vivo Wear between Polyethylene Inserts articulating against Ceramic and Cobalt-Chrome Femoral Components in Total Knee Prostheses

M. Ueno, M. Kyomoto, M. Iwamoto, 2007 .

Antidegenerative Effects of Partial Disc Replacement in an Animal Surgery Model

M. Neo, S. Hyon, Takashi Nakamura, 2007, Spine.

Effects of mobility/immobility of surface modification by 2-methacryloyloxyethyl phosphorylcholine polymer on the durability of polyethylene for artificial joints.

Kozo Nakamura, K. Ishihara, H. Kawaguchi, 2009, Journal of biomedical materials research. Part A.

Self-initiated surface grafting with poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone).

Kozo Nakamura, K. Ishihara, H. Kawaguchi, 2010, Biomaterials.

Effects of mobility/immobility of surface modification by 2-methacryloyloxyethyl phosphorylcholine polymer on the durability of polyethylene for artificial joints.

Kozo Nakamura, K. Ishihara, H. Kawaguchi, 2009, Journal of biomedical materials research. Part A.