J. Gloaguen

R. Granet, P. Krausz, J. Gloaguen, 2004, Journal of environmental science and health. Part. B, Pesticides, food contaminants, and agricultural wastes.

Analysis of Polypropylene Deformation in a 135° ECAE Die: Experiments and Three-Dimensional Finite Element Simulations

F. Zaïri, J. Lefebvre, J. Gloaguen, 2009 .

A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2011 .

Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling

F. Zaïri, G. Ayoub, J. Lefebvre, 2011 .

Plasticity and fracture initiation in rubber-toughened poly(methyl methacrylate)

J. Lefebvre, J. Gloaguen, P. Steer, 1993 .

Elaboration of EVA–nanoclay systems—characterization, thermal behaviour and fire performance

S. Duquesne, R. Delobel, M. Bras, 2003 .

Microstructure and Mechanical Properties of Severely Deformed Polypropylene in ECAE (Equal Channel Angular Extrusion) via Routes A and C

I. Vozniak, F. Zaïri, J. Gloaguen, 2022, Polymers.

Evaluation by Wide-Angle X-ray Scattering of the Particle Evolution in Polypropylene Processed by Equal Channel Angular Extrusion

T. Boukharouba, J. Gloaguen, R. Boulahia, 2014 .

Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations

G. Stoclet, F. Zaïri, J. Lefebvre, 2014 .

Successive Translucent and Opaque Shear Bands Accompanied by a Pronounced Periodic Waves Observed in a Polypropylene (PP) Processed by Single ECAE Pass

T. Boukharouba, F. Zaïri, J. Lefebvre, 2011 .

Steady Plastic Flow of a Polymer during ECAE Process: Experiments and Modelling

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2010 .

Deformation behaviour and mechanical properties of polypropylene processed by equal channel angular extrusion: Effects of back-pressure and extrusion velocity

Moussa Nait-Abdelaziz, T. Boukharouba, Fahmi Zaïri, 2009 .

Finite Element Analysis of Plastic Strain Distribution in Multipass ECAE Process of High Density Polyethylene

Moussa Nait-Abdelaziz, B. Aour, Fahmi Zaïri, 2009 .

Experimental and numerical study of ECAE deformation of polyolefins

Moussa Nait-Abdelaziz, B. Aour, Jean-Marc Lefebvre, 2009 .

Steady plastic flow of a polymer during equal channel angular extrusion process: Experiments and numerical modeling

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2008 .

A computational study of die geometry and processing conditions effects on equal channel angular extrusion of a polymer

Moussa Nait-Abdelaziz, B. Aour, Fahmi Zaïri, 2008 .

Influence of the initial yield strain magnitude on the materials flow in equal-channel angular extrusion process

Moussa Nait-Abdelaziz, B. Aour, Fahmi Zaïri, 2007 .

Numerical modelling of elastic–viscoplastic equal channel angular extrusion process of a polymer

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2006 .

Numerical investigation on equal channel angular extrusion process of polymers

Moussa Nait-Abdelaziz, B. Aour, Fahmi Zaïri, 2006 .

Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films

M. Benguediab, F. Zaïri, G. Ayoub, 2010 .

Plasticity of styrene-co-methylmethacrylate random copolymers

J. Lefebvre, J. Gloaguen, B. Escaig, 1995 .

Plasticity and thermally-induced recovery in polycarbonate

M. Benguediab, N. Ding, F. Zaïri, 2020 .

A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory

Moussa Nait-Abdelaziz, Ghassan T. Kridli, Georges Ayoub, 2014 .

Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber

F. Zaïri, G. Ayoub, M. Nait-Abdelaziz, 2011 .

Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction

F. Zaïri, J. Lefebvre, J. Gloaguen, 2010 .

Modelling finite deformation stress-strain response during loadingunloading of polyethylene over a wide range of crystallinities

F. Zaïri, G. Ayoub, J. Lefebvre, 2010 .

Micromechanics-based constitutive modeling of plastic yielding and damage mechanisms in polymer–clay nanocomposites: Application to polyamide-6 and polypropylene-based nanocomposites

Ali Zaoui, Moussa Nait-Abdelaziz, T. Boukharouba, 2014 .

Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2011 .

On the overall elastic moduli of polymer–clay nanocomposite materials using a self-consistent approach. Part II: Experimental verification

Ali Zaoui, Moussa Nait-Abdelaziz, Tanguy Messager, 2011 .

Repeated equal-channel angular extrusion of polypropylene: Processing routes and back-pressure influence

F. Zaïri, J. Gloaguen, Yu. V. Voznyak, 2020 .

Multiscale Observation of the Fatigue‐Induced Damage Mechanisms in Carbon‐Black Filled Styrene‐Butadiene Rubber

F. Zaïri, T. Benameur, J. Gloaguen, 2020 .

Mechanistic insights on nanosilica self-networking inducing ultra-toughness of rubber-modified polylactide-based materials

P. Dubois, F. Lauro, C. Jérôme, 2015 .

Micromechanical modelling and simulation of chopped random fiber reinforced polymer composites with progressive debonding damage

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2008 .

Micromechanical modelling and experimental investigation of random discontinuous glass fiber polymer–matrix composites

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2007 .

Modelling of the elasto-viscoplastic damage behaviour of glassy polymers

F. Zaïri, J. Lefebvre, M. Nait-Abdelaziz, 2008 .

Fracture characterization of high-density polyethylene pipe materials using the $$J$$J-integral and the essential work of fracture

M. Elmeguenni, J. Gloaguen, F. Zaïri, 2013 .

Critical energy for crack initiation in rubber-toughened poly (methyl methacrylate)

J. Lefebvre, J. Gloaguen, C. Wrotecki, 1993 .

Plasticity of rubber-toughened poly(methyl methacrylate): effect of rubber particle size

J. Lefebvre, J. Gloaguen, P. Gaillard, 1992 .

Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate

Moussa Nait-Abdelaziz, Krzysztof Woznica, Fahmi Zaïri, 2007 .

FRACTURE OF RUBBERS UNDER MULTIAXIAL CYCLIC LOADING

G. Ayoub, J. Gloaguen, M. Naït‐Abdelaziz, 2010 .

Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions

A. Zaoui, F. Zaïri, M. Nait-Abdelaziz, 2013 .

Structural and thermodynamics properties of organo-modified montmorillonite clay

A. Zaoui, F. Zaïri, M. Nait-Abdelaziz, 2015 .

Volume strain measurements by optical extensometry: application to the tensile behaviour of RT-PMMA

J. Lefebvre, J. Gloaguen, P. François, 1994 .

Electro-Optical and Morphological Characterization of Electron Beam Cured Liquid Crystal-Polymer Composite Materials

J. Gloaguen, U. Maschke, X. Coqueret, 1996 .

Effect of UV Ageing on the fatigue life of bulk polyethylene

B. Mansoor, G. Ayoub, M. Nait-Abdelaziz, 2018 .