C. Luhrs

发表

Paste-based 3D printing of metallic materials: effect of binders and precursor sizes

R. Agrawal, Farsai Anantachaisilp, Joaquín Tirano, 2019, Materials Research Express.

Novel Formulations of Phase Change Materials—Epoxy Composites for Thermal Energy Storage

M. E. Arce, C. Luhrs, Miguel Angel Alvarez Feijoo, 2018, Materials.

Hybrid Composites Based on Carbon Fiber/Carbon Nanofilament Reinforcement

M. Al-Haik, M. Tehrani, C. Luhrs, 2014, Materials.

Graphitic encapsulation of micron- and nano-sized Ni particles using ethylene as precursor

J. A. Menéndez, J. Menéndez, Y. Fernández, 2009 .

High-stability tin/carbon battery electrodes produced using reduction expansion synthesis

V. Pol, Ryan A. Adams, Chun Wu, 2018, Carbon.

Novel Graphitic Structures by Design

J. Phillips, M. Al-Haik, J. Cordaro, 2007, 2008 GSW Proceedings.

Fabrication of surrogate glasses with tektite composition

R. Mariella, Troy Y. Ansell, C. Luhrs, 2019, Journal of Radioanalytical and Nuclear Chemistry.

Introduction of Rare-Earth Oxide Nanoparticles in CNT-Based Nanocomposites for Improved Detection of Underlying CNT Network

V. Ortalan, T. Isık, Troy Y. Ansell, 2021, Nanomaterials.

Impact of Current and Temperature on Extremely Low Loading Epoxy-CNT Conductive Composites

D. Grbovic, C. Luhrs, J. Phillips, 2020, Polymers.

Molybdenum carbide synthesis using plasmas for fuel cells

C. Luhrs, 2022 .

Reduction Expansion Synthesis of Sintered Metal

Troy Y. Ansell, C. Luhrs, J. Phillips, 2019, Materials.

Novel Chemical Process for Producing Chrome Coated Metal

H. Zea, C. Luhrs, J. Phillips, 2018, Materials.

Modeling of Energy Demand and Savings Associated with the Use of Epoxy-Phase Change Material Formulations

R. Agrawal, C. Luhrs, Lara Febrero, 2020, Materials.

Effects of Thermal Activation on CNT Nanocomposite Electrical Conductivity and Rheology

Joel Hubbard, H. Zea, Joaquín Tirano, 2022, Polymers.

CNT Conductive Epoxy Composite Metamaterials: Design, Fabrication, and Characterization

D. Grbovic, C. Luhrs, A. Rizzo, 2020, Materials.

Production of graphene from graphite oxide using urea as expansion–reduction agent

J. Grey, R. Martínez, C. Luhrs, 2010 .

Synthesis and characterisation of nano alumina dental filler

M. Al-Haik, M. Tehrani, C. Luhrs, 2008 .

Epoxy–PCM Composites with Nanocarbons or Multidimensional Boron Nitride as Heat Flow Enhancers

R. Agrawal, C. Luhrs, J. Hanna, 2019, Molecules.

IF-WS2/Nanostructured Carbon Hybrids Generation and Their Characterization

Michael J. Moberg, L. Brewer, S. Menon, 2014 .

Scaling up the Fabrication of Mechanically-Robust Carbon Nanofiber Foams

William Curtin, Pedro J. Arias-Monje, Charliean Dominguez, 2016 .

Generation of carbon nanofilaments on carbon fibers at 550 °C

M. Al-Haik, M. Taha, M. Tehrani, 2009 .

Electrical behavior of CNT epoxy composites under in-situ simulated space environments

Daniel J. Sakoda, Joel Hubbard, C. Luhrs, 2021 .

Synthesis of crystalline YCoO3 perovskite via sol–gel method

Claudia Luhrs, Carlos R. Michel, A. Chávez-Chávez, 2004 .

Reductive/expansion synthesis of zero valent submicron and nanometal particles

H. Zea, C. Luhrs, J. Phillips, 2011 .

Mechanical Properties of 3D-Printed Maraging Steel Induced by Environmental Exposure

Troy Y. Ansell, C. Luhrs, Chanman Park, 2020 .

Enhancement of electrical conductivity of carbon nanotube sheets through copper addition using reduction expansion synthesis

Troy Y. Ansell, R. Agrawal, I. M. D. Rosa, 2020, Materials Research Bulletin.

On the plasma-based growth of ‘flowing’ graphene sheets at atmospheric pressure conditions

M. Abrashev, E. Tatarova, N. Bundaleska, 2016 .

Novel Process for Solid State Reduction of Metal Oxides and Hydroxides

Z. Leseman, C. Luhrs, J. Phillips, 2013, Metallurgical and Materials Transactions B.

Generation of aluminum nanoparticles using an atmospheric pressure plasma torch

M. Nemer, G. López, W. Perry, 2004 .

Graphite oxide as a precursor for the synthesis of disordered graphenes using the aerosol-through-plasma method

T. Alam, T. Lambert, C. A. Chavez, 2010 .

Insitu Raman spectroscopy and thermal analysis of the formation of nitrogen-doped graphene from urea and graphite oxide

S. Osswald, D. Palaniuk, C. Luhrs, 2013 .

Electrically Conductive CNT Composites at Loadings below Theoretical Percolation Values

D. Grbovic, C. Luhrs, J. Phillips, 2019, Nanomaterials.

Solid hydrocarbon assisted reduction: a new process of generating micron scale metal particles

C. Luhrs, 2015 .

REDUCTION EXPANSION SYNTHESIS FOR MAGNETIC ALLOY POWDERS

C. Luhrs, J. Phillips, 2015 .

Fabrication of a Low Density Carbon Fiber Foam and Its Characterization as a Strain Gauge

C. Luhrs, J. Phillips, Chris D. Daskam, 2014, Materials.

IF-WS 2 / Nanostructured Carbon Hybrids Generation and Their Characterization

Michael J. Moberg, L. Brewer, S. Menon, 2014 .

Reduction Expansion Synthesis as Strategy to Control Nitrogen Doping Level and Surface Area in Graphene

S. Osswald, H. Zea, C. Luhrs, 2015, Materials.

Microwave plasmas applied for the synthesis of free standing graphene sheets

M. Abrashev, E. Tatarova, A. Ferraria, 2014 .

Microwave plasma based single step method for free standing graphene synthesis at atmospheric conditions

A. Dias, M. Abrashev, E. Tatarova, 2013 .

Review: Engineering Particles Using the Aerosol-Through-Plasma Method

M. Richard, C. Luhrs, J. Phillips, 2009, IEEE Transactions on Plasma Science.

Hybrid Carbon Fibers/Carbon Nanotubes Structures for Next Generation Polymeric Composites

L. Dai, A. Roy, M. Al-Haik, 2010 .

Synthesis of WS2 nanostructures from the reaction of WO3 with CS2 and mechanical characterization of WS2 nanotube composites

M. Al-Haik, M. Tehrani, H. Zea, 2011, Nanotechnology.

Synthesis of WS 2 nanostructures from the reaction of WO 3 with CS 2 and mechanical characterization of WS 2 nanotube composites

M. Al-Haik, M. Tehrani, H. Zea, 2011 .

The production of carbon nanofibers and thin films on palladium catalysts from ethylene–oxygen mixtures

J. A. Menéndez, Y. Fernández, S. Doorn, 2009 .

Introducing Nanotechnology to Mechanical and Civil Engineering Students Through Materials Science Courses

Marwan Al-Haik, Claudia Luhrs, Zayd C. Leseman, 2010 .

Novel Growth of Multiscale Carbon Nanofilaments on Carbon and Glass Fibers

M. Al-Haik, M. Taha, C. Luhrs, 2009 .