M. Khomutov

发表

Effect of hot isostatic pressing on structure and properties of intermetallic NiAl–Cr–Mo alloy produced by selective laser melting

A. Sova, V. Cheverikin, P. Petrovskiy, 2020 .

Simulation of the Kinetics of Dynamic Recrystallization of Alloy KhN55MBYu-VD During Hot Deformation

M. Khomutov, A. Churyumov, A. A. Chereshneva, 2019, Metal Science and Heat Treatment.

Comparative study of the stress flow models for high-boron corrosion-resistant steel based on an Arrhenius-type equation and artificial neural networks

A. Solonin, M. Khomutov, A. Churyumov, 2014, Russian Metallurgy (Metally).

Effect of Zr and Er Small Additives on the Phase Composition and Mechanical Properties of Al–5Si–1.3Cu–0.5Mg Alloy

M. Khomutov, A. V. Pozdniakov, A. Mochugovskiy, 2021, Physics of Metals and Metallography.

Effect of the Zr and Er Content on the Structure and Properties of the Al–5Si–1.3Cu–0.5Mg Alloy

A. Prosviryakov, M. Khomutov, A. V. Pozdniakov, 2021, Physics of Metals and Metallography.

Application of nanodiamonds for in situ synthesis of TiC reinforcing nanoparticles inside aluminium matrix during mechanical alloying

A. Prosviryakov, M. Presniakov, I. Khodos, 2017 .

Manufacturing of Ti6Al4V alloy part reinforced by silicon carbide fibers by laser powder bed fusion with following hot isostatic pressing

V. Cheverikin, P. Petrovskiy, A. Travyanov, 2021, The International Journal of Advanced Manufacturing Technology.

Particulate metal matrix composites development on the basis of in situ synthesis of TiC reinforcing nanoparticles during mechanical alloying

A. Prosviryakov, M. Presniakov, M. Khomutov, 2017 .

Development of Al-5Cu/B4C composites with low coefficient of thermal expansion for automotive application

M. Khomutov, A. Churyumov, V. S. Zolotorevskiy, 2017 .

Microstructure of Al–Mg-Sc-Zr alloy cold spray deposits after heat treatment and hot isostatic pressing

V. Cheverikin, P. Petrovskiy, A. Travyanov, 2020 .

Effect of Scandium Content on the Structure and Properties of Alloy Al – 4.5% Zn – 4.5% Mg – 1% Cu – 0.12% Zr

M. Khomutov, M. Glavatskikh, A. Pozdnyakov, 2022, Metal Science and Heat Treatment.

Structure and properties of АА7075-SiC composite parts produced by cold spray additive manufacturing

V. Cheverikin, P. Petrovskiy, A. Travyanov, 2021, The International Journal of Advanced Manufacturing Technology.

The Effect of Yittrium and Zirconium on the Structure and Properties of the Al–5Si–1.3Cu–0.5Mg Alloy

M. Khomutov, R. Barkov, M. Glavatskikh, 2022, Physics of Metals and Metallography.

Boron-Containing Steel Structure and Properties at Room and Elevated Temperature

A. Solonin, M. Khomutov, A. Churyumov, 2015, Metallurgist.

Study of the Structure and High-Temperature Mechanical Properties of a Steel with an Elevated Content of Boron

M. Khomutov, A. Churyumov, E. L. Mukhanov, 2014, Metal Science and Heat Treatment.

Flow Stress Modelling and 3D Processing Maps of Al4.5Zn4.5Mg1Cu0.12Zr Alloy with Different Scandium Contents

A. Solonin, M. Khomutov, A. Churyumov, 2021, Applied Sciences.

Effect of Elevated Temperatures on the Mechanical Properties of a Direct Laser Deposited Ti-6Al-4V

S. Ivanov, A. Artinov, M. Khomutov, 2021, Materials.

Effect of Thermal Deformation Treatment Regimes on Al–4.5Zn–4.5Mg–1Cu–0.12Zr–0.1Sc Alloy Structure and Properties

A. Travyanov, M. Khomutov, R. Barkov, 2023, Metallurgist.

Hot Deformation Behavior of Novel Al-Cu-Y(Er)-Mg-Mn-Zr Alloys

M. Khomutov, A. Churyumov, R. Barkov, 2021, Metals.

Hot deformation behaviour and fracture of 10CrMoWNb ferritic–martensitic steel

A. Solonin, M. Khomutov, A. Churyumov, 2015 .

Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures

A. Solonin, M. Khomutov, A. Churyumov, 2014, The Physics of Metals and Metallography.

The Effects of Yttrium and Erbium on the Phase Composition and Aging of the Al–Zn–Mg–Cu–Zr Alloy with a High Copper Content

M. Khomutov, R. Barkov, M. Glavatskikh, 2022, Physics of Metals and Metallography.

Influence of hot isostatic pressing on the properties of 316L stainless steel, Al-Mg-Sc-Zr alloy, titanium and Ti6Al4V cold spray deposits

V. Cheverikin, P. Petrovskiy, A. Travyanov, 2021 .

Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: A preliminary study

V. Brailovski, S. Prokoshkin, A. Kreitcberg, 2014 .

Novel Cast and Wrought Al-3Zn-3Mg-3Cu-Zr-Y(Er) Alloys with Improved Heat Resistance

M. Khomutov, R. Barkov, M. Glavatskikh, 2023, Metals.

Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti–50 at%Ni alloy

V. Brailovski, D. Gunderov, S. Prokoshkin, 2015 .

Manufacturing of Ti6Al4V alloy part reinforced by silicon carbide fibers by laser powder bed fusion with following hot isostatic pressing

V. Cheverikin, P. Petrovskiy, A. Travyanov, 2021, The International Journal of Advanced Manufacturing Technology.

Comprehensive Analysis of Microstructure and Hot Deformation Behavior of Al-Cu-Y-Mg-Cr-Zr-Ti-Fe-Si Alloy

I. Loginova, M. Khomutov, R. Barkov, 2023, Metals.

Deformation Behavior, Microstructure and Mechanical Properties of new Al–Cu–Yb(Gd)–Mg–Mn–Zr Alloys

M. Khomutov, R. Barkov, S. Amer, 2023, Metallurgist.

Simulation of Flow Stress of Single-Phase Aluminum Alloys of the Al – Mg, Al – Cu and Al – Zn Systems in the Process of Hot Deformation

A. Bazlov, M. Khomutov, A. Churyumov, 2013, Metal Science and Heat Treatment.