P. Promoppatum

发表

Analytical evaluation of defect generation for selective laser melting of metals

S. Yao, P. Promoppatum, S. Yao, 2019, The International Journal of Advanced Manufacturing Technology.

Identifying Material and Device Targets for a Flare Gas Recovery System Utilizing Electrochemical Conversion of Methane to Methanol

V. Viswanathan, P. Promoppatum, 2016 .

A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion

A. Rollett, P. Pistorius, S. Yao, 2017 .

Topology optimization for liquid-based battery thermal management system under varied charge rates

P. Promoppatum, Yanin Sukjai, Vichapol Wanittansirichok, 2022, Journal of Energy Storage.

Analytical evaluation of defect generation for selective laser melting of metals

P. Promoppatum, S. Yao, Patcharapit Promoppatum, 2019, The International Journal of Advanced Manufacturing Technology.

Load-carrying capacity of additively manufactured part using graded-topology infilled lattices structures

P. Promoppatum, V. Uthaisangsuk, K. Sookchanchai, 2022, Mechanics of Advanced Materials and Structures.

Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products

Xinran Zhao, P. Promoppatum, S. Yao, 2017 .

Numerical and experimental investigations of micro and macro characteristics of direct metal laser sintered Ti-6Al-4V products

Recep Onler, P. Promoppatum, S. Yao, 2017 .

Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product

A. Rollett, R. Martukanitz, P. Pistorius, 2018, Progress in Additive Manufacturing.

Influence of material constitutive models on thermomechanical behaviors in the laser powder bed fusion of Ti-6Al-4V

A. Rollett, P. Promoppatum, 2020 .

Design exploration of 3D-printed triply periodic minimal surface scaffolds for bone implants

P. Promoppatum, Saran Seehanam, Teerapong Poltue, 2021 .

Mechanical and fluid characteristics of triply periodic minimal surface bone scaffolds under various functionally graded strategies

P. Promoppatum, Teerapong Poltue, Chatchai Karuna, 2022, J. Comput. Des. Eng..

Understanding size-dependent thermal, microstructural, mechanical behaviors of additively manufactured Ti-6Al-4V from experiments and thermo-metallurgical simulation

B. Chayasombat, Dhritti Tanprayoon, P. Promoppatum, 2022, Journal of Manufacturing Processes.

Physics-based and phenomenological plasticity models for thermomechanical simulation in laser powder bed fusion additive manufacturing: A comprehensive numerical comparison

A. Rollett, P. Promoppatum, 2021 .

Influence of scanning length and energy input on residual stress reduction in metal additive manufacturing: Numerical and experimental studies

P. Promoppatum, S. Yao, 2020 .

Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product

A. Rollett, R. Martukanitz, P. Pistorius, 2018, Progress in Additive Manufacturing.

Effect of fin pitches on the air-side performance of L-footed spiral fin-and-tube heat exchangers

S. Wongwises, P. Promoppatum, Parinya Pongsoi, 2013 .

Modulating fracture toughness through processing-mediated mesostructure in additively manufactured Al-12Si Alloy

U. Ramamurty, P. Promoppatum, M. Jhon, 2022, Materials & Design.

Multiscale investigation of the influence of geometrical imperfections, porosity, and size-dependent features on mechanical behavior of additively manufactured Ti-6Al-4V lattice struts

S. Wongwises, P. Promoppatum, V. Uthaisangsuk, 2021 .

Quantification and prediction of lack-of-fusion porosity in the high porosity regime during laser powder bed fusion of Ti-6Al-4V

R. Srinivasan, S. Quek, P. Promoppatum, 2021, Journal of Materials Processing Technology.

Experimental and numerical investigation of the cross-flow PCM heat exchanger for the energy saving of building HVAC

Shi-Chune Yao, Patcharapit Promoppatum, Thomas Hultz, 2017 .

Numerical Modeling of Distortion of Ti-6Al-4V Components Manufactured Using Laser Powder Bed Fusion

P. Rattanadecho, P. Ninpetch, P. Kowitwarangkul, 2022, Metals.

Part scale estimation of residual stress development in laser powder bed fusion additive manufacturing of Inconel 718

P. Promoppatum, V. Uthaisangsuk, 2021, Finite Elements in Analysis and Design.

Predicting Phase Transformation Kinetics during Metal Additive Manufacturing Using Non-isothermal Johnson-Mehl-Avrami Models: Application to Inconel 718 and Ti-6Al-4V

Long-Qing Chen, R. Martukanitz, Y. Ji, 2021, Additive Manufacturing.

In-situ modification of thermal, microstructural, and mechanical responses by altering scan lengths in laser powder bed fusion additive manufacturing of Ti-6Al-4V

M. Tsukamoto, B. Chayasombat, T. Suga, 2023, Optics & Laser Technology.

Dual-laser powder bed fusion additive manufacturing: computational study of the effect of process strategies on thermal and residual stress formations

P. Promoppatum, 2022, The International Journal of Advanced Manufacturing Technology.

Assessing the effect of manufacturing defects and non-Newtonian blood model on flow behaviors of additively manufactured Gyroid TPMS structures

P. Promoppatum, Saran Seehanam, Wares Chanchareon, 2023, Heliyon.

Effect of the thermoplastic types and ratios for the 3D printed thermoplastic natural rubber vulcanizates: Mechanical, dynamical, thermal, printed-structural properties

Y. Nakaramontri, P. Promoppatum, T. Prasopdee, 2023, Industrial Crops and Products.

Numerical Modeling of Non-linear Thermal Stress in Direct Metal Laser Sintering Process of Titanium Alloy Products

Shi-Chune Yao, Patcharapit Promoppatum, Xinran Zhao, 2016 .

Effect of porosity distribution on the strength and strain-to-failure of Laser-Powder Bed Fusion printed Ti-6Al-4V

S. Quek, P. Promoppatum, S. Samudrala, 2023, Additive Manufacturing.

Factors affecting the reduction rate of odontogenic cysts after decompression based on 3-dimensional volumetric analysis

P. Promoppatum, Pornkawee Charoenlarp, B. Kaboosaya, 2023, Imaging science in dentistry.

Post-yielding and failure mechanism of additively manufactured triply periodic minimal surface lattice structures

P. Promoppatum, V. Uthaisangsuk, S. Msolli, 2024, Results in Engineering.