P. Tarantili

P. Tarantili, A. Andreopoulos, Marianna I. Triantou, 2015, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

Properties of Maxillofacial Silicone Elastomers Reinforced with Silica Powder

P. Tarantili, A. Andreopoulos, M. Evangelatou, 1998, Journal of biomaterials applications.

Thermomechanical properties and bioactivity evaluation of silicone rubber composites

P. Tarantili, S. Vasilakos, T. Papadopoulos, 2018 .

The effect of foaming process with supercritical CO 2 on the morphology and properties of 3D porous polylactic acid scaffolds

E. Douni, Vasiliki Louli, P. Tarantili, 2022, Polymer Engineering & Science.

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

P. Tarantili, Ioanna-Georgia Athanasoulia, Petroula A. Tarantili, 2016 .

Characterization of metallized biaxially oriented polypropylene film

P. Tarantili, E. Vassiliadi, 2007 .

A Review on Various Treatments of UHMPE Fibers

P. Tarantili, A. Andreopoulos, 1998 .

Study of biopolymers as carriers for controlled release

P. Tarantili, A. Andreopoulos, 2002 .

Mechanical properties and nanostructure correlation of condensation-type poly(dimethyl siloxane)/layered silicate hybrids

P. Tarantili, S. Vasilakos, 2012 .

Swelling Properties of Various Polymers Used in Controlled Release Systems

M. Vlachou, P. Tarantili, A. Andreopoulos, 2001, Journal of biomaterials applications.

In vitro drug release studies from organoclay/poly(dimethyl siloxane) nanocomposite matrices.

P. Tarantili, S. Vasilakos, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Preparation of poly(acrylonitrile–butadiene–styrene)/montmorillonite nanocomposites and degradation studies during extrusion reprocessing

P. Tarantili, E. Karahaliou, 2009 .

Water sorption characteristics of epoxy resin–UHMPE fibers composites

P. Tarantili, A. Andreopoulos, 1998 .

WASTE LEATHER PARTICLES AS A FILLER FOR POLY(VINYL CHLORIDE) PLASTISOLS

P. Tarantili, A. Andreopoulos, 2000 .

Reinforced Elastomers: Interphase Modification and Compatibilization in Rubber-Based Nanocomposites

P. Tarantili, 2013 .

The effect of compatibilizers and organically modified nanoclay on the morphology and performance properties of poly(acrylonitrile–butadiene–styrene)/polypropylene blends

P. Tarantili, Marianna I. Triantou, Marios Gavriel, 2016 .

The effect of matrix composition on the properties of cellulosic fibers–polyethylene composites

P. Tarantili, G. Katsoulotos, 2008 .

Thermal, Mechanical, and dielectric properties of Injection Molded Graphene Nanocomposites Based on ABS/PC and ABS/PP Blends

P. Tarantili, Marianna I. Triantou, K. Stathi, 2018, Polymer Composites.

The effect of organoclay and graphene on the crystallization of PP in ABS/PP blends

P. Tarantili, Marianna I. Triantou, 2017, Journal of Thermal Analysis and Calorimetry.

Rheological and Thermomechanical Properties of Graphene/ABS/PP Nanocomposites

P. Tarantili, Marianna I. Triantou, K. Stathi, 2014 .

Physical properties of a silicone prosthetic elastomer stored in simulated skin secretions.

M. Frangou, G. Polyzois, P. Tarantili, 2000, The Journal of prosthetic dentistry.

Stability of ABS Compounds Subjected to Repeated Cycles of Extrusion Processing

P. Tarantili, E. Karahaliou, P. A. Tarantili, 2009 .

Plasticized Poly(Vinyl Chloride) Filled with Waste Leather Particles

P. Tarantili, A. Andreopoulos, K. Babanas, 2001 .

Thermal transitions and stability of melt mixed TiO 2 /Poly(L‐lactic acid) nanocomposites

P. Tarantili, Ioanna-Georgia I. Athanasoulia, Ioanna‐Georgia Athanasoulia, 2018, Polymer Engineering & Science.

Composites of Engineering Plastics with Layered Silicate Nanofillers: Preparation and Study of Microstructure and Thermomechanical Properties

P. Tarantili, 2011 .

Studies on morphology and thermomechanical performance of ABS/PC/organoclay hybrids

P. Tarantili, Marianna I. Triantou, 2014 .

The effect of accelerated ageing on performance properties of addition type silicone biomaterials

G. Polyzois, P. Tarantili, K. Stathi, 2010, Journal of materials science. Materials in medicine.

Bonding of silicone extra-oral elastomers to acrylic resin: the effect of primer composition.

M. Frangou, G. Polyzois, P. Tarantili, 2003, The European journal of prosthodontics and restorative dentistry.

Titanium Dioxide/Polysiloxane Composites: Preparation, Characterization and Study of Their Color Stability Using Thermochromic Pigments

D. Kekos, G. Polyzois, D. Mamma, 2022, Journal of Composites Science.

Low-κ′ dielectric properties of UV-treated bi-axially oriented polypropylene films

P. Tarantili, C. Dervos, M. D. Athanassopoulou, 2009 .

In situ monitoring by DSC and modeling of curing of vinyl polysiloxanes in layered silicate nanocomposites

P. Tarantili, S. Vasilakos, 2017, Journal of Thermal Analysis and Calorimetry.

Sustained release of guaifenesin and ipriflavone from biodegradable coatings

P. Tarantili, H. Koumoulos, 2008 .

Release of Propranolol and Diclofenac from Low Mw DL-Poly(Lactic Acid)

P. Tarantili, A. Andreopoulos, C. S. Proikakis, 2002, Journal of biomaterials applications.

Effect of accelerated aging on the structure and properties of monolayer and multilayer packaging films

P. Tarantili, V. Kiose, 2008 .

The effect of poly(ethylene glycol) mixed with poly( l ‐lactic acid) on the crystallization characteristics and properties of their blends

D. Korres, P. Tarantili, Ioanna-Georgia I. Athanasoulia, 2019, Polymer International.

Effect of hydrophilic inclusions on PDMS crosslinking reaction and its interrelation with mechanical and water sorption properties of cured films

K. Papadokostaki, P. Tarantili, A. Panou, 2013 .

Preparation, Characterization and Drug Release Studies from Poly(D,L-lactic acid)/organoclay Nanocomposite Films

P. Tarantili, C. Stathokostopoulou, 2014 .

Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE)

P. Tarantili, P. A. Tarantili, A. N. Mitsakaki, 2010 .

Resole resin as sizing agent for aramid fibres

P. Tarantili, A. Andreopoulos, J. Bousoulas, 2001 .

Epoxy Resin Composites with Surface Modified Aramid Fibres

G. Rallis, P. Tarantili, A. Andreopoulos, 2000 .

Preparation and study of aramid/epoxy prepregs

P. Tarantili, A. Andreopoulos, 1995, Journal of Materials Science.

Treated Aramid Fibres as Reinforcement for Epoxies

P. Tarantili, A. Andreopoulos, 1994 .

Preparation by solution mixing and characterization of condensation type poly(dimethyl siloxane)/graphene nanoplatelets composites

A. Kyritsis, G. Pilatos, P. Tarantili, 2021, Journal of Composite Materials.

The effect of graphene oxide on thermomechanical and permeability properties of poly(dimethyl siloxane) composites

G. Pilatos, N. Todorova, C. Trapalis, 2021, Materials Today: Proceedings.

Real-Time Micro-Raman Measurements on Stressed Polyethylene Fibers. 1. Strain Rate Effects and Molecular Stress Redistribution

C. Galiotis, P. Tarantili, A. Andreopoulos, 1998 .

Mechanical properties of epoxies reinforced with chloride-treated aramid fibers

P. Tarantili, A. Andreopoulos, Petroula A. Tarantili, 1997 .

A STUDY OF CONCRETES CONTAINING THERMOPLASTIC WASTES AS AGGREGATES

C. Karakosta, D. Tassios, P. Tarantili, 2007 .

Cross-synergism in enzymatic hydrolysis of lignocellulosics: Mathematical correlations according to a hyperbolic model

E. Koukios, P. Christakopoulos, D. Kekos, 1996 .

Preparation of hybrid composites of PLLA using GO/PEG masterbatch and their characterization

T. Giannakopoulou, N. Todorova, C. Trapalis, 2020, Journal of Thermal Analysis and Calorimetry.

Poly(vinyl pyrrolidone)–poloxamer-188 solid dispersions prepared by hot melt extrusion

D. Bikiaris, E. Karavas, P. Tarantili, 2013, Journal of Thermal Analysis and Calorimetry.

The effect of hydroxyapatite nanoparticles on crystallization and thermomechanical properties of PLLA matrix

D. Korres, P. Tarantili, Ioanna‐Georgia Athanasoulia, 2016 .

Study of thermomechanical and antibacterial properties of TiO2/Poly(lactic acid) nanocomposites

C. Trapalis, P. Tarantili, S. Karapati, 2018 .

The Effect of Pigments on the Stability of Silicone/ Montmorillonite Prosthetic Nanocomposites

P. Tarantili, S. Vasilakos, Petroula A. Tarantili, 2010 .

Compatibilization Mechanism and Property Improvement of Immiscible Engineering Plastic Blends

P. Tarantili, A. Andreopoulos, E. Chatzigiannakis, 2013 .

Study of the off-axis properties of composites reinforced with ultra high modulus polyethylene fibres

P. Tarantili, A. Andreopoulos, 1999 .

Polymers for Use in Controlled Release Systems: The Effect of Surfactants on their Swelling Properties

N. Hani, M. Vlachou, P. Tarantili, 2000, Journal of biomaterials applications.

Xanthan Gum as a Carrier for Controlled Release of Drugs

P. Tarantili, Andreas G. Andreopoulos, 2001, Journal of biomaterials applications.

Swelling Properties of Various Polymers Used in Controlled Release Systems

M. Vlachou, P. Tarantili, A. Andreopoulos, 2001, Journal of biomaterials applications.

The effect of cross-linking system and reinforcement on the cross-linking reaction of peroxide vulcanized ethylene-propylene-diene terpolymer (EPDM) matrix

P. Tarantili, P. Ketikis, I. Ketikis, 2023, Journal of Macromolecular Science, Part A.